Where is the air filter located in the Magotan?

What are the precautions for manual transmission in Subject 3?

Subject 3 examination precautions are mainly divided into vehicle inspection, turn signals and starting, vehicle acceleration, special zones, etc. The details are as follows. Vehicle Inspection: After getting out of the driver's seat, remember to close the car door. The buttons at the rear and front of the car must be pressed until the broadcast inside the car sounds before proceeding. Turn Signals and Starting: During the Subject 3 examination, starting, changing lanes, and overtaking all require the use of turn signals. The examination rules state that the corresponding operation can only be performed three seconds after activating the turn signal. When starting the vehicle, first gear must be used. However, during the examination, first gear cannot be used continuously; timely gear shifting and speed adjustment are required. Vehicle Acceleration: During the examination, the examiner may request acceleration, but the driver must not accelerate suddenly, as abrupt upshifting can cause the vehicle to stall. Wait until the engine speed reaches around 2000 rpm, press the clutch, shift to second gear, then press the accelerator to upshift. Continue upshifting following this principle. Special Zones: In special zones, note that many areas no longer provide voice prompts, such as school zones, bus stops, and crosswalks. However, candidates must perform corresponding deceleration or yielding operations based on the project signs and road markings. In school zones, apply the brakes 10 meters before the project sign, keeping the speed below 30 km/h. At bus stops, apply the brakes 10 meters before the project sign, keeping the speed below 30 km/h. At crosswalks, apply the brakes to decelerate within 30 meters before the crosswalk.

2

5

Share

Does Vehicle Water Damage Insurance Cover Claims?

If you have purchased vehicle damage insurance, the insurance company will cover claims for water damage to your vehicle. According to the regulations after the 2020 vehicle damage insurance reform, the insurance company is responsible for compensating for total or partial losses of motor vehicles caused by rainstorms, floods, landslides, etc. Insurance Compensation: After the reform, as long as the vehicle owner has purchased vehicle damage insurance, they can receive compensation for water damage. The new regulations stipulate that vehicle damage insurance includes coverage for total vehicle theft, separate glass breakage, spontaneous combustion, engine water damage, no deductible, and special provisions for cases where a third party cannot be found. The insurance company will compensate based on the insured amount purchased, with the maximum compensation limit being the amount of coverage purchased. Important Notes: Before the insurance reform, engine damage caused by water submersion or flooding was only covered by water damage insurance. However, if the engine damage was caused by human actions after water submersion, the water damage insurance would not cover it. Before the reform, in the event of vehicle water damage, the owner needed to have both vehicle damage insurance and water damage insurance to receive full compensation. If only vehicle damage insurance was purchased, engine damage would not be covered. If only water damage insurance was purchased, the maximum compensation was only 80%. Therefore, to receive full compensation for water damage while driving, it was necessary to have both vehicle damage insurance and water damage insurance.

7

1

Share

What is the age range for using child safety seats?

Applicable age range: From birth to 14 years old. Car child safety seats, also known as Child Restraint Systems (CRS), are specially designed seats for children of different ages (or weights) that are installed in vehicles to effectively improve child passenger safety. The definition of a child safety seat is as follows: 1. A child safety protection system that can be fixed to a motor vehicle, consisting of a safety belt assembly with buckles or flexible components, adjustment mechanisms, accessories, etc. 2. It can be combined with additional devices such as portable cribs, infant carriers, booster seats, or impact protectors. In the event of a car collision or sudden deceleration, it reduces the impact force on children and limits their body movement to minimize injuries and ensure their safety during travel.

1

5

Share

What does the engine model L15B8 mean?

Engine model L15B8 means that the B8 model is equipped with a 1.5-liter gasoline engine. Engine Introduction: An engine is a machine that can convert various forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. Engine Working Principle: The working principles of two-stroke engines and four-stroke engines are different, and most automobile engines are four-stroke. The working cycle of a four-stroke gasoline engine consists of 4 piston strokes, namely the intake stroke, compression stroke, power stroke, and exhaust stroke.

20

4

Share

Which air circulation mode to use when car windows fog up?

When car windows fog up, you should use the external air circulation mode. The fastest and most effective method when noticing fog on the windshield is to first adjust the air conditioning vents to the front windshield, turn on the AC cooling function, and activate external circulation. Using maximum fan speed, it typically takes just about ten seconds to quickly dissipate the fog on the windows. Generally, car air conditioning systems come equipped with two defogging function buttons: front window defogging and rear window heating. Here's relevant information: 1. Front window defogging: This function directs air conditioning airflow to the front windshield to reduce temperature differences on both sides of the glass for defogging. 2. Rear window heating: When the rear window fogs up, the rear window heating function can evaporate the moisture to achieve defogging.

4

2

Share

How to activate the front radar on Volkswagen CC?

Long press the radar button on Volkswagen CC to activate the front radar. The activation condition is that the vehicle speed must be below 15 km/h. When the speed exceeds 15 km/h, the front radar will automatically turn off. Here is an introduction about the front radar of Volkswagen CC: 1. The front radar sensors are installed on the front bumper, radiating at approximately a 45-degree angle to search for targets in all directions. Its greatest advantage is the ability to detect obstacles below the bumper that are difficult for the driver to see from inside the car and provide an alert. 2. The front radar can inform the driver about surrounding obstacles through sound or a more intuitive display. It eliminates the troubles caused by the driver's need to check front, rear, left, and right when parking, reversing, or starting the vehicle, and helps to eliminate blind spots and unclear vision, thereby improving driving safety.

10

2

Share

Where is the air filter located in the Magotan?

What are the precautions for manual transmission in Subject 3?

Does Vehicle Water Damage Insurance Cover Claims?

What is the age range for using child safety seats?

What does the engine model L15B8 mean?

Which air circulation mode to use when car windows fog up?

How to activate the front radar on Volkswagen CC?

What Causes a Car Battery to Overheat and Emit Gas?

What Causes the Gurgling Sound in a Car's Radiator?

What Causes a Car That Won't Start and Also Can't Lock the Doors?

Will a car be scrapped if it is submerged above the roof?