Where is the air filter located in the Honda CR-V?

1 Answers
StPatrick
07/30/25 7:31am
It is located on the right side of the engine compartment. The commonly used air filters in engines mainly include the inertial oil-bath air filter, the paper dry-type air filter, and the polyurethane filter element air filter. Inertial Oil-Bath Air Filter: It undergoes three stages of filtration: inertial filtration, oil-bath filtration, and filter-type filtration. The latter two types of air filters mainly rely on the filter element for filtration. The inertial oil-bath air filter has advantages such as low intake resistance, adaptability to dusty and sandy working environments, and a long service life. It was previously used in various models of cars and tractor engines. However, this type of air filter has drawbacks such as low filtration efficiency, heavy weight, high cost, and inconvenient maintenance, and has gradually been phased out in automotive engines. Paper Dry-Type Air Filter: Made from resin-treated microporous filter paper, the filter paper is porous, loose, and folded, with certain mechanical strength and water resistance. It offers advantages such as high filtration efficiency, simple structure, light weight, low cost, and easy maintenance, making it the most widely used air filter in automobiles today. Polyurethane Filter Element Air Filter: The filter element is made of soft, porous, sponge-like polyurethane with strong adsorption capabilities. This type of air filter shares the advantages of the paper dry-type air filter but has lower mechanical strength and is widely used in passenger car engines. The drawbacks of the latter two types of air filters are their relatively short service life and unreliability under harsh environmental conditions.
Was this review help?
13
5
Share
More Forum Discussions

What are the reasons for the Volkswagen Tiguan's air conditioning not cooling?

Insufficient or excessive refrigerant, etc. Below are detailed explanations: Insufficient or too little refrigerant: This is likely caused by minor leaks in the refrigeration system. Excessive refrigerant: The proportion of refrigerant in the air conditioning system has specific requirements. If the proportion is too high, it can affect heat dissipation. Similarly, adding too much engine coolant during repairs may also reduce the heat dissipation capacity of the refrigeration system. Loose air conditioning compressor drive belt: The compressor may slip during operation, leading to reduced transmission efficiency, lower compressor speed, decreased refrigerant compression delivery, and ultimately affecting the car's air conditioning cooling performance.
13
2
Share

Is the Altima 2.0T transmission using a steel belt or chain?

The Altima 2.0T transmission uses a chain. Below is a detailed introduction to the transmission: Function: During vehicle operation, to adapt to different working conditions, the driving force and speed of the car need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the need for a transmission. Common faults: During long-term use, due to frequent gear shifting, the components in the transmission inevitably undergo wear and deformation, leading to issues such as difficulty in shifting gears, automatic gear disengagement, and noise during operation, which affect performance. Therefore, in daily use, it is essential to regularly conduct full-load operational checks on the transmission, observe whether the transmission operates smoothly, check for abnormal gaps or noises, and promptly identify the causes for adjustment or repair.
11
2
Share

What are the reasons for false tire pressure warnings in Volkswagen vehicles?

Volkswagen tire pressure false warnings are caused by abnormal tire pressure, unreset tire pressure monitoring, or damaged tire pressure sensors. Abnormal tire pressure: Generally, the system will trigger an alert when pressure falls below 1.8 bar or exceeds 3.0 bar. In such cases, tire inspection and pressure adjustment are required. Unreset tire pressure monitoring: After inflating the tires, if the tire pressure monitoring system isn't reset promptly, it continues to record the previous data, causing the tire pressure warning light to illuminate. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving (e.g., by hitting a curb), it will trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new component.
18
3
Share

What is Chery?

Chery Rely car: "Riich Ruiqi" is a mid-to-high-end sedan brand with the genes of "vision, daring, and success". Here is the relevant introduction: Basic introduction: Chery Automobile Co., Ltd. is a state-controlled enterprise engaged in automobile production, registered on January 8, 1997, with its headquarters located in Wuhu City, Anhui Province. The current chairman and general manager is Yin Tongyue. The company's products cover passenger cars, commercial vehicles, microcars, and other fields. In August 2016, Chery ranked 450th in the "2016 China Top 500 Enterprises". In 2019, Chery ranked 90th in the "Belt and Road" China Top 100 Enterprises list. Brand introduction: Chery Automobile Co., Ltd. was established on January 8, 1997. With the strategic goal of building an "international brand", after 19 years of innovative development, it has now become the largest independent brand automobile manufacturing enterprise in China integrating R&D, trial production, production, and sales of complete vehicles, powertrains, and key components, as well as the largest passenger car export enterprise in China.
9
5
Share

What engine does the Volkswagen Sehol use?

The engine used in Sehol is a domestically produced engine manufactured by the Jianghuai Group. The engine model is HFC4GC1.6E, with a maximum horsepower of 184, a maximum power of 135KW, a maximum power speed of 5500rpm, and a peak torque of 300N.m. Sehol was established on April 24, 2018, and is one of the sub-brands under Volkswagen. It includes three major product categories: sedans, SUVs, and station wagons. Its models include the Sehol E50A, Sehol E40X, Sehol E20X, Sehol E10X, etc. For daily maintenance of the Sehol engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB_CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and keep the oil level moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and still carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
2
5
Share

What engine does the Bestune X40 use?

The Bestune X40 is equipped with a 1.6L naturally aspirated engine. Below are the relevant details: Function: The engine's function is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing the gas to expand and push the pistons to perform work. Dimensions: The vehicle dimensions are: length 4310mm, width 1780mm, height 1680mm, wheelbase 2600mm, fuel tank capacity 50L, and trunk capacity 375L. The 2019 Bestune X40 features a MacPherson strut front suspension and a torsion beam rear suspension, with a maximum horsepower of 114ps, maximum power of 84kw, and maximum torque of 115nm.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.