···
Log in / Register

Where is the air filter located in the BYD S7?

1Answers
LaDante
07/24/2025, 08:56:30 AM

The air filter in the BYD S7 is located under the glove compartment on the passenger side, near the center console. Its functions are: 1. To provide fresh air; 2. To absorb harmful substances; 3. To filter solid impurities. Taking the 2017 manual luxury version of the BYD S7 as an example, its body dimensions are: length 4835mm, width 1855mm, height 1720mm, with a wheelbase of 2730mm and a fuel tank capacity of 72 liters. The 2017 manual luxury version of the BYD S7 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 154 PS, a maximum power of 113 kW, and a maximum torque of 240 Nm.

Was this review help?
111
Share
More Q&A

What Are the Causes of Excessive Exhaust Pipe Temperature?

Excessive exhaust pipe temperature may be caused by high return gas temperature, high compression ratio, high condensing pressure, refrigerant type, and other reasons. High return gas temperature: If the insulation of the return gas pipeline is poor, the degree of superheat will far exceed 20°C. The higher the return gas temperature, the higher the cylinder suction temperature and exhaust pipe temperature will be. High compression ratio: The exhaust pipe temperature is greatly affected by the compression ratio. The higher the compression ratio, the higher the exhaust pipe temperature. Reducing the compression ratio can significantly lower the exhaust pipe temperature. Specific methods include increasing the suction pressure and reducing the discharge pressure. High condensing pressure: There are two reasons why high condensing pressure causes an increase in exhaust pipe temperature: high condensing pressure leads to a high compressor pressure ratio, which raises the exhaust pipe temperature; or high condensing pressure corresponds to a high condensing temperature, which inevitably increases the compressor's exhaust pipe temperature. Refrigerant type: Different refrigerants have different thermophysical properties, resulting in varying degrees of exhaust pipe temperature increase after undergoing the same compression process. Therefore, different refrigerants should be selected for different refrigeration temperatures.
120
Share

Where Do Flood-Damaged Cars Ultimately End Up?

Flood-damaged cars may end up in the used car market, be scrapped, or disassembled for parts, with relatively better components potentially making their way to auto repair shops. Below are methods for identifying flood-damaged and accident vehicles: 1. Inspect the Car Locks: Look for signs of forced entry, damage, or adhesive injection. Then, use the key to open each door to check if the locks are from the same set and if each door lock turns easily. Note that if turning is very difficult, or the key almost breaks before the door opens, it could be due to flood damage causing the central locking motor to rust and malfunction. 2. Engine Compartment: Check if the mounting brackets for the compartment's lighting and signal lights are broken or loose. Inspect the wiring connectors and sockets; if they contain a lot of mud or show rust spots, the car might be flood-damaged. 3. Engine Room Inspection: Examine the wiring and vacuum lines on the engine block, and check for mud traces in the gaps between the high-voltage ignition coils and spark plugs. Assess whether the aging and cracking of hoses and wiring match the car's age, and check the fuel injector's mounting and spring for rust, which can help determine the likelihood of flood damage.
111
Share

Will the Insurance Company Compensate for a Car Flooded in a Flood?

If a car is flooded in a flood, the insurance company will compensate as long as the owner has purchased vehicle damage insurance. According to the vehicle damage insurance policy, the insurance company is responsible for compensating for the total or partial loss of the vehicle caused by lightning, heavy rain, floods, waterlogging, tsunamis, etc. Here are some methods to identify flood-damaged and accident vehicles: 1. Check the car locks: Look for signs of being pried open, damaged, or filled with glue. Then use the key to open each door to see if the locks are from the same set and whether each door lock can be turned easily. Note that if turning is very difficult, or the key almost breaks before the door opens, it may be due to flooding, causing the central control motor to rust and malfunction. 2. Engine compartment: Inspect the fixed brackets of the lighting and signal lamp groups in the engine compartment for breaks or looseness. Check the wire connectors and sockets; if there is a large amount of mud or rust spots attached, it may indicate a flood-damaged vehicle. 3. Engine compartment inspection: Examine the wires and vacuum pipes on the engine body, and check for mud traces in the gaps between the high-voltage ignition coils and spark plugs. Determine whether the aging and cracking condition of the pipes and wires match the vehicle's age, and check the fixation of the fuel injectors. Rust on springs can also help assess the likelihood of the car being flood-damaged.
109
Share

How to Set Up Cadillac Daytime Running Lights?

Cadillac's daytime running lights do not require manual activation; they automatically turn on as soon as the car starts. If the daytime running lights do not illuminate after starting the vehicle, it indicates that the model does not have this feature. If desired, you can have a set of daytime running lights installed at a modification or decoration shop. Here are some details about daytime running lights: 1. Daytime running lights are lamps that make the vehicle more easily recognizable during daytime driving: Installed at the front of the vehicle, these lights are not for illumination or to help the driver see the road but to signal the presence of an approaching vehicle, falling under the category of signal lights. 2. Daytime running lights meet basic brightness requirements: However, they should not be too bright to avoid disturbing others. Unlike regular low-beam headlights, daytime running lights are specifically designed for daytime driving illumination. Those utilizing LED technology further enhance energy efficiency, consuming only 10% of the power used by standard low-beam headlights. When the car's engine starts, the daytime running lights automatically activate and gradually increase in brightness to alert other motorists, cyclists, and pedestrians. As night falls and the driver manually turns on the low-beam headlights, the daytime running lights automatically turn off.
119
Share

What level is the Haval M6?

Haval M6 is a compact-level SUV, which is built with a new concept and is a brand-new model designed by an international design team. The following is extended information about car levels: 1. Micro cars, small cars, compact cars, mid-size cars, large mid-size cars, and full-size cars. 2. Small SUVs, compact SUVs, mid-size SUVs, large mid-size SUVs, and full-size SUVs. 3. MPVs, sports cars, pickup trucks, microvans, light buses, and micro trucks. The following is extended information about the Haval M6: 1. The Haval M6 has a body size of 4649mm in length, 1830mm in width, and 1705mm in height, with a wheelbase of 2680mm. 2. This car is equipped with a 1.5T turbocharged engine, with a maximum power of 110 kW and a maximum torque of 210 Nm. The engine is paired with a 7-speed dual-clutch transmission and a 6-speed manual transmission. 3. The front suspension of the Haval M6 uses a MacPherson independent suspension, and the rear suspension uses a double-wishbone independent suspension.
101
Share

Can Car Covers Protect Against Sunlight?

Car covers can protect against sunlight. They are protective covers made by manufacturers using specialized sunproof fabrics, with materials selected to block ultraviolet transmission, reflecting or absorbing UV rays as much as possible. Car covers indirectly protect the vehicle, wipers, air conditioning, and engine, preventing damage from weather, environmental factors, and human interference. A car cover mainly consists of three parts: the cover body, straps, and spring hooks. The front strap is closed and is put on from the head, while the rear strap is open and secured to the rear of the car with a lock that cannot be removed without a dedicated key. Then, the spring hooks on both sides of the cover are hooked onto the lower edge of the car body to secure the cover in place.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.