Where is the air filter located in the Audi A6?

Should the left turn signal be activated when starting in the Subject 2 driving test?

According to the regulations of the Subject 2 driving test, the left turn signal must be activated when starting the vehicle. In the Subject 2 test, there are a total of 6 instances where the turn signal is required: When starting the vehicle, activate the left turn signal; When starting on a slope, activate the left turn signal; During parallel parking, activate the right turn signal when the vehicle passes the parking spot and stops 30 cm away from the curb, preparing to reverse; Before shifting into reverse gear during parallel parking, activate the left turn signal because the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left; Before exiting the parking spot during parallel parking, shift into drive gear and activate the left turn signal, then turn it off promptly after exiting; When entering the area for a right-angle turn, activate the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect use of turn signals are as follows: Failure to use or incorrect use of the turn signal before starting, turning, changing lanes, overtaking, or parking results in a deduction of 10 points. Activating the turn signal for less than 3 seconds before starting, turning, changing lanes, overtaking, or parking results in a deduction of 10 points. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, or deducting 5 points. The test is considered passed under the following conditions: ① For applicants of large buses, trailers, city buses, medium buses, or large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles C1 and C2 include reversing into a parking space, parallel parking, stopping and starting on a slope (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves) as the five mandatory items (some regions include a sixth item: highway card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include pole parking, stopping and starting on a slope, parallel parking, crossing a single-plank bridge, curve driving, right-angle turns, passing through a width-restricted gate, navigating continuous obstacles, driving on bumpy roads, making U-turns on narrow roads, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

1

5

Share

Subject 1 Exam Question Type Ratio

There is no fixed ratio for question types in the driver's license Subject 1 exam; the questions appear randomly. The exam consists of 100 questions, each worth 1 point. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," each question is worth 1 point, totaling 100 points. If a candidate answers 11 questions incorrectly during the exam, the system will automatically submit the test and end the exam. Subject 1, also known as the theoretical exam or driver's theory test, is part of the motor vehicle driver's license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam is conducted on a computer and has a time limit of 45 minutes. Subject 1 exam content: Driver's license and motor vehicle management regulations; road traffic conditions and rules; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for medium and large passenger and cargo vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: Candidates should pay attention to their attire during the exam—no slippers are allowed, and electronic devices and bags are prohibited in the exam hall. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures displayed on the screen, and store personal belongings in lockers before entering the exam hall. Upon entering, candidates will be assigned a seat at the identity verification counter. Once seated, the exam begins. Ensure the camera is aligned correctly and adhere to exam discipline. If a candidate fails the first attempt, a retake is available on the same day. If the retake is also failed, the candidate must pay to reschedule. After the exam, queue to collect the score report and sign it; unsigned reports are considered invalid. There is no limit to the number of times Subject 1 can be scheduled. Each subject can be taken once, with one retake allowed if the initial attempt is failed. If the retake is also failed or not taken, the exam process ends, and the applicant must reschedule. In contrast, Subject 2 and Subject 3 have only five exam attempts each, and rescheduling must occur at least ten days later. If the Subject 3 safety and civilized driving knowledge exam is failed, the previously passed road driving skills exam results remain valid. The driver's license exam consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge exam. Subject 2 refers to the field driving skills exam. Subject 3 is divided into two parts: road driving skills and safety and civilized driving knowledge. The safety and civilized driving knowledge exam is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official terminology (as per the Ministry of Public Security's Order No. 123) does not include the term "Subject 4."

17

0

Share

What Causes Jerking Sensation in Diesel Vehicles During Normal Driving?

Here are the reasons for jerking sensation in diesel vehicles during normal driving: 1. Lubrication issues: Low oil and coolant temperatures in cold weather lead to insufficient lubrication, increasing engine workload. 2. Operation problems: In manual transmission vehicles, jerking during acceleration or deceleration mainly results from improper throttle and clutch control. 3. Dirty intake valves: Clogged intake valves cause insufficient air supply - cleaning them resolves this. 4. Fuel injector problems: Poor fuel atomization from injectors. 5. Fuel quality issues: Poor fuel quality or diesel with excessive water content.

5

0

Share

How to Fix the Detached Fabric Inside the Car?

Detached fabric inside the car can be repaired using specialized automotive adhesive products, which typically solve the problem within 3-5 minutes. Below is relevant information about automotive interior fabric: 1. Function: Enhances the interior decoration while also improving thermal insulation between the interior and exterior; reduces interior noise, enhances sound absorption, and increases passenger comfort and safety. 2. Material: Textiles account for over 50% of the materials used in automotive fabric. Automotive textiles mainly include woven fabrics, knitted fabrics, non-woven fabrics, and fiber composites, with knitted and woven fabrics being the two primary categories.

7

4

Share

Why do the ABS and ESP lights come on together?

ABS and ESP lights coming on simultaneously is normal, as both indicators illuminate when the vehicle's stability system and anti-lock braking system are active. If the lights remain continuously illuminated without turning off, potential causes may include severe contamination of related sensors, damaged ABS sensors, or battery malfunctions. ABS stands for Anti-lock Braking System, a technology designed to prevent loss of vehicle control while generally increasing braking distance to enhance safety. The automotive ESP system is a chassis braking technology developed based on the anti-lock control system, primarily composed of a control unit, steering sensor, wheel speed sensor, skid sensor, and lateral acceleration sensor.

11

3

Share

Is the Camry 10-speed CVT durable?

The 10-speed CVT in the Camry is of excellent quality and highly durable. Here are the relevant details: 1. Camry: The Camry is a model under GAC Toyota. For 37 years, each generation of the Camry has consistently led its segment, earning the trust of 20 million owners worldwide. 2. CVT: Continuously Variable Transmission is a type of automatic transmission that can achieve any gear ratio within its range, providing optimal matching between the drivetrain and engine conditions. Common CVT types include hydro-mechanical CVT, metal belt CVT (VDT-CVT), and variable geometry CVT.

20

5

Share

Where is the air filter located in the Audi A6?

Should the left turn signal be activated when starting in the Subject 2 driving test?

Subject 1 Exam Question Type Ratio

What Causes Jerking Sensation in Diesel Vehicles During Normal Driving?

How to Fix the Detached Fabric Inside the Car?

Why do the ABS and ESP lights come on together?

Is the Camry 10-speed CVT durable?

What Are the Hazards of Speeding While Driving a Car?

How to use the induction tailgate of the Tiguan L?

What to do when ETC sometimes doesn't respond?

Can the compulsory traffic insurance be delayed for a few days?