···
Log in / Register

Where is the air filter located in an older model Crown?

5 Answers
VonVanessa
07/29/25 10:55am

The air filter in a Crown vehicle is installed inside the glove compartment on the passenger side. Here is some relevant information: 1. Information about the Crown's air filter: The model number of the Crown's air filter is Toyota 87139-06060. When purchasing, note that there are two types of air filters: one without activated carbon and another with activated carbon. The air filter with activated carbon not only performs the functions mentioned above but also absorbs a significant amount of odors. 2. Benefits of timely air filter replacement: Timely replacement of the air filter ensures clean air in the cabin, preventing bacterial growth and creating a healthy environment. It effectively separates solid impurities such as dust, powder, and grinding particles from the air. It also effectively blocks pollen, ensuring that drivers and passengers do not experience allergic reactions that could affect driving safety.

Was this review help?
5
4
Share
KarterMarie
08/13/25 4:33pm

I've driven quite a few old Crown models, and their cabin air filters are usually hidden behind the glove compartment on the passenger side. Last year, I helped a friend replace one. You just need to open the glove box door, where there's a small clip or knob. Twist or press it to remove the entire glove box, and the air filter is located inside a plastic cover at the back. The cover has a few clips; a gentle pry will let you take it out and replace the filter. These filters tend to get dirty and clogged, affecting airflow quality. I recommend checking them once a year before summer to avoid odors or poor cooling. Replacing the cabin air filter is actually quite cheap. Just make sure to buy the correct size online—there are many Crown models, so it's best to match the filter to your specific model. If you're unsure, you can always ask a mechanic for help.

Was this review help?
1
0
Share
Expand All
DeKira
10/07/25 7:52am

I've worked on quite a few older cars, and the Crown's cabin air filter locations are pretty similar, mainly on the passenger side of the dashboard. Open the glove box, empty it first, then look for fasteners at the bottom or side of the box—usually plastic clips or screws. Remove them, and the box can be taken off. The cabin air filter is in a slot on the rear wall, a small rectangular box that you can pull out to clean or replace. Remember to pay attention to the directional arrow when installing the new one; putting it in backward affects filtration. While driving, listen for any unusual noises from the AC—blockages can cause strange sounds. It's recommended to replace it every 20,000 kilometers to keep the cabin air fresh.

Was this review help?
4
3
Share
Expand All
EvaRose
11/21/25 2:26am

The air filter in the old Crown is usually located inside the glove compartment. After opening it, you can feel it by reaching inside. I've changed it a few times before—the position is fixed, and the installation is simple: remove the clutter, release the compartment latch, and pull it out to see the filter. Don't skip this step, as it affects the entire system's efficiency.

Was this review help?
13
4
Share
Expand All
VonMadison
11/21/25 2:28am

As a car enthusiast, I know the old Crown's air filter is usually located behind the glove compartment on the passenger side. When operating, first empty the compartment, locate and remove the fastening points, and the filter will be in the slot inside. Timely replacement is beneficial for health, reduces dust inhalation, and extends the air conditioning system's lifespan. I usually replace it during spring and summer to maintain a cool and comfortable interior.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

How to reset the maintenance light on a Great Wall WEY VV7?

Great Wall WEY VV7 maintenance light reset method: 1. Turn on the ignition switch and hold down the reset button 5, then turn off the ignition switch; 2. Continue holding the reset button 5 without releasing it, the instrument panel should display nothing (blank screen state), then release the button; 3. Press and hold the reset button 5 again, then turn on the ignition switch. At this time, the maintenance reminder on the instrument panel will flash. Keep holding the reset button 5 without releasing it until the maintenance reminder stops flashing, then release the button. The Great Wall WEY VV7 has dimensions of 4749mm in length, 1931mm in width, and 1655mm in height, with a wheelbase of 2950mm, positioned as a midsize SUV.
18
5
Share

What is the wading depth of the x3?

x3 has a maximum wading depth of 400mm. The wading depth of the x3 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally speaking, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake is below the water level when the x3 is wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause serious damage to the engine's mechanical structure (connecting rods, pistons, crankshaft, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the vehicle from automatically restarting after stalling in water, which could cause severe damage if water enters the engine; Judge the underwater road conditions based on the passage of vehicles ahead and choose a suitable entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration; On roads prone to water accumulation, observe warning water level markers, trees, and other reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed; Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not enter the water recklessly; choose an alternative route instead.
11
3
Share

How to Replace the Battery in a Volvo Car Key?

Method for replacing the battery in a Volvo car key: Press the switch on the front of the key and pull it downward to remove the metal key. Pry open the gap on the key to open the cover, then replace the button battery. Volvo models include the Volvo XC90, Volvo XC40, Volvo V40, Volvo V60, Volvo V90, and Volvo S60. Among them, the Volvo S60 has a length of 4715mm, width of 1866mm, height of 1481mm, a wheelbase of 2856mm, and a minimum ground clearance of 146mm. The Volvo S60 is equipped with a 2.0L turbocharged engine, delivering a maximum power of 120kw and a maximum torque of 265nm, with the maximum power achieved at 5000 rpm and the maximum torque available between 1600 to 3800 rpm.
17
5
Share

What is the difference between 98W and 94V tires?

94V indicates a maximum load capacity of 670Kg per tire, while 98W represents a maximum load capacity of 750kg per tire and a speed rating of 270KM/h. Based on the maximum speed, tire speed ratings can be classified into different levels from A to Z, with level A further subdivided into eight different levels from A1 to A8.
4
1
Share

Does the Honda XR-V not have an automatic transmission?

Honda XR-V is equipped with a CVT continuously variable transmission, which is an automatic transmission. The CVT continuously variable transmission has no gears, allowing for continuous and stepless speed changes during driving, resulting in fuel efficiency and a large speed ratio. Below are the relevant introductions: 1. Positioning: XR-V is an SUV model under Honda. 2. Exterior: The exterior design is stylish and elegant, with angular headlight designs that are just as distinctive as other models in the same class. The rear design is simple and generous, with a few strokes outlining the compact contour of the rear. The body lines are relatively neat, giving a sense of refined and elegant beauty, and even the wheel hubs exude a sense of stability and grandeur. 2. Space: The body dimensions of the Honda XR-V are 4328 1772 1605mm, making it a 5-door, 5-seat SUV with ample space to meet the needs of both the driver and rear passengers. 3. Interior: The overall interior is neat and spacious, appearing comfortable and refreshing. Large areas of soft materials are used to enhance comfort, and metal decorative elements are added to areas such as the dashboard and air vents, adding a touch of charm to the cabin.
8
0
Share

What is the maximum power of the Ora R1 electric motor?

The maximum power of the Ora R1 electric motor is 35kW, with a maximum torque of 125Nm. It has a top speed of 102km/h and uses a ternary lithium-ion battery with an energy capacity of 28.5kWh. According to the Ministry of Industry and Information Technology, its pure electric range is 301km. The Ora R1 is a new energy vehicle under the Great Wall brand. It comes in five body colors: Sky Blue, Titanium White, Dynamic Blue, Dynamic Blue with Titanium White, and Titanium White with Pearl Black. The dimensions of the Ora R1 are 3495mm in length, 1660mm in width, and 1560mm in height, with a wheelbase of 2475mm and a minimum ground clearance of 140mm.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.