Where is the Air Filter Located in a BMW 2 Series?

1 Answers
LaMichael
07/30/25 5:27am
The air filter in a BMW 2 Series is located under the front windshield. Below is some knowledge about the air filter. Functions of the Air Filter: It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. It separates solid impurities such as dust, pollen, and abrasive particles from the air. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, providing strong and long-lasting moisture absorption. It prevents the car windows from fogging up, ensuring clear visibility and safe driving for passengers. It supplies fresh air to the cabin, preventing harmful gases from being inhaled by occupants and ensuring driving safety. It also effectively sterilizes and deodorizes. Maintenance of the Air Filter: Cleaning Tip: If the filter is dirty, clean it by blowing compressed air from the opposite side. Hold the air gun about 5 cm (centimeters) away from the filter and blow at 500 kPa pressure for approximately 2 minutes. The air filter tends to accumulate a lot of dust, and blowing away the loose dust with compressed air is sufficient. Never clean it with water, as this can easily damage it.
Was this review help?
7
3
Share
More Forum Discussions

What is the warranty period for a car battery?

Car batteries typically come with a one-year warranty. As an expendable part, car batteries have a relatively short warranty period. The car battery serves as the primary energy storage device in a vehicle, supplying power to all electronic systems. With modern cars becoming increasingly electronic, their reliance on the car battery grows stronger. A lack of battery power can render the entire vehicle inoperable. The functions of a car battery include: 1. Providing power for the car's starting and ignition systems; 2. Supplying stable DC power to the car's electrical appliances, ensuring that the electronic circuits and DC lighting systems can operate normally even when the car is parked; 3. Acting as a large 'capacitor' to stabilize voltage when the car is running at high speeds.
13
1
Share

What are the symptoms of a faulty car turbocharger?

The symptoms of a faulty car turbocharger are: 1. Poor sealing of the turbocharger impeller shaft, manifested by: blue smoke from the exhaust at idle, varying in intensity; 2. Severe blockage of the exhaust gas recirculation pipe, manifested by: blue smoke from the exhaust at idle and while driving; 3. Wear or aging of piston rings, cylinder walls, or valve oil seals, manifested by: heavy blue smoke from the vehicle, abnormal noise from the turbocharger turbine end, and oil leakage from the turbocharger turbine end; 4. Cracked turbocharger air duct, manifested by: a "fluttering" abnormal noise when accelerating or decelerating. A turbocharger is an air compressor that increases air intake by compressing air.
9
1
Share

How to Open the Hood of a Ford Car?

Method to open the hood of a Ford car: Ford cars have an anti-theft feature for the hood, and the opening method is different. You need to press the front emblem backward and then turn it to the left. After seeing the keyhole, use the key to turn it once to the left and twice to the right, then lift the hood upward to open it. Taking the Focus as an example, this car is a compact model under Ford, with a body structure of a 4-door, 5-seat sedan. The dimensions are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm. In terms of power, the Focus is equipped with a 3-cylinder, 1.5-liter, 122-horsepower naturally aspirated engine, paired with a 6-speed manual transmission. For suspension, the Focus uses a MacPherson strut independent suspension and a torsion beam non-independent suspension.
20
2
Share

Does a 48V Mild Hybrid Need Battery Replacement?

48V mild hybrids do not require battery replacement because the engine can automatically recharge the electric motor while the vehicle is in motion. However, if the motor is damaged or the battery is depleted due to special circumstances, the battery will need to be replaced. The 48V circuit is responsible for supporting the active chassis system, air conditioning compressor, and regenerative braking system. The 48V mild hybrid system primarily consists of three core components: the torque-assist recovery motor, power conversion unit, and power battery. In this system, the electric motor hardly participates in directly driving the vehicle but serves as a tool for energy recovery to assist the engine. This allows the vehicle's electrical equipment to minimize reliance on the engine, enabling the engine to drive the vehicle more efficiently.
20
0
Share

What is the ground clearance of the RAV4 in centimeters?

The ground clearance of the 2021 RAV4 is 193 millimeters. The ground clearance of the 2021 RAV4 refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Generally, the higher the ground clearance of the 2021 RAV4, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds may decrease. A brief introduction to the vehicle: The RAV4's monocoque body structure is unique among multi-purpose off-road vehicles. On August 26, 2013, the all-new Toyota RAV4 was launched in China. The dimensions of the 2021 RAV4 are 4600 mm in length, 1855 mm in width, and 1680 mm in height, with a wheelbase of 2690 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the 2021 RAV4 is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the 2021 RAV4. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban driving with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or driving on rough terrain, a vehicle with higher ground clearance is advisable to avoid scraping or damaging the undercarriage.
10
0
Share

How to Fix a Seatbelt That Won't Pull Out?

Seatbelt that won't pull out can be repaired by: 1. The seatbelt is stuck. Improper use can deform the seatbelt, making it prone to jamming at the entry and exit points. In this case, generally straightening the seatbelt and pulling it out slowly will suffice; 2. Mechanical failure. If the seatbelt is not deformed but still won't pull out, there may be a mechanical failure at the junction between the seatbelt and the car body. In this case, it is necessary to go to a 4S shop for disassembly and further inspection. The car seatbelt is a protective device that "ties" the occupants to the seat, preventing injuries caused by passengers hitting the windshield, seats, or other objects due to inertia during a severe collision or being thrown out of the car.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.