Where is the Air Filter Located?

2 Answers
McAshlyn
07/29/25 1:02am
Air filter is located on the right side of the car engine compartment. Here is the relevant introduction about air filter: 1. Definition: Air filter is a type of filter, also known as air filter cartridge, air cleaner, or air element. It is mainly used for air filtration in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. 2. Classification: Air filters can be divided into several types, including filtration type, centrifugal type, oil bath type, and composite type. The commonly used air filters in engines mainly include inertial oil bath air filters, paper dry-type air filters, and polyurethane filter element air filters.
Was this review help?
2
5
Share
McAlex
08/12/25 5:12am
The air filter is usually located in the engine compartment, and its position is quite easy to find. After opening the hood, you'll immediately spot a rectangular black plastic box, typically connected to a large pipe—that's the home of the air filter. The exact position varies by vehicle model: front-wheel-drive cars often have it near the front, below the windshield, while rear-wheel-drive cars may position it slightly further back, but it's always near the intake duct entrance. Having driven many car models, I find it simple to identify—the box often has an 'air filter' label or is secured with clips. Its location is crucial because it filters dust and debris from the air entering the engine; a dirty filter can lead to soaring fuel consumption and reduced engine power, especially on dusty roads. It's recommended to inspect and replace it every 15,000 kilometers or once a year—it's an easy DIY job: just lift the cover, pull out the old filter, and insert a new one. Be cautious not to burn your hands on a hot engine during the process. With the correct positioning and regular maintenance, you can extend your engine's lifespan, saving both money and hassle.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

How to Prevent Rainwater on Car Rearview Mirrors?

There are several main methods to prevent rainwater on car rearview mirrors: 1. Before driving in the rain, evenly apply soap on the rearview mirrors. After the soap hardens, wipe it off with a towel. This will form a wax layer on the glass surface, which has excellent water-repellent properties. 2. Use a water repellent: Spray or apply the water repellent evenly on the rearview mirrors. The repellent will form a protective film on the surface of the mirrors, which also has good hydrophobic properties, effectively preventing fogging and ensuring clear visibility. 3. Install rain guards on the rearview mirrors: These can block rainwater and prevent it from dripping onto the mirror surface. However, rain guards cannot solve the problem of fogging on the rearview mirrors.
19
4
Share

What engine does the Lynk & Co 01 New Energy use?

The Lynk & Co 01 New Energy model is equipped with the Drive-E series VEP4 2.0TD engine. Here are the relevant details: 1. This engine has a displacement of 2.0L and adopts an inline four-cylinder structure. It follows a modular design concept and is equipped with different turbocharging configurations. 2. The engine used in the Lynk & Co 01 achieves maximum torque at just 1400 rpm, with a maximum power output of 140kW and peak torque of 300Nm. 3. The 2.0TD engine in the Lynk & Co 01 shares fundamental parameters with Volvo's T4 engine, but it has undergone special tuning for different vehicle models, ensuring optimal compatibility across various configurations. 4. The significance of the Drive-E powertrain lies in its breakthrough in cylinder count constraints while maintaining engine performance. Despite its smaller displacement, this engine delivers higher efficiency and lower emissions, achieving an ideal balance between power and environmental friendliness. 5. Thanks to its centrally positioned fuel injector design, this engine enables more thorough fuel-air mixing, improving fuel efficiency and reducing vehicle fuel consumption.
13
1
Share

What Does It Mean When Water Enters the Engine?

When driving in rainy weather or on flooded roads, water may sometimes enter the vehicle's engine, causing malfunctions. Below is an explanation of how water enters the engine: 1. If water enters the engine through the exhaust pipe, it must pass through the muffler, mid-pipe, and catalytic converter to reach the engine. The interior of the muffler and catalytic converter consists of complex mesh structures, combined with the curved exhaust pipe, making it nearly impossible for water to pass through. In reality, the main cause of engine stalling due to water ingress is not the exhaust system but the intake system. 2. When rainwater bypasses the air intake, it can wet the air filter or even flow into the intake manifold, eventually reaching the cylinders. Generally, if the air filter gets soaked by rainwater, the intake will be blocked, causing the engine to stall. However, if an attempt is made to restart the engine, the movement of the pistons can draw rainwater from the intake into the cylinders.
17
2
Share

How to Identify Wheel Positions?

Here are the methods to identify wheel positions: 1. First, locate the position of the left wheel. When driving on a road with marked lines, use the steering wheel as a reference. Observe the leftmost edge of the steering wheel, then look straight ahead. As the edge line extends forward and coincides with the road edge line, a perpendicular tangent line from the steering wheel edge will pass exactly over the left tire, thereby accurately determining the wheel's position. 2. Similarly, using the steering wheel as a reference, when you see the rightmost edge of the steering wheel, look outward by an additional 10 cm. This point forms a line extending to the right front, and the extension of this line indicates the correct position of the right front wheel.
18
5
Share

What Are the Symptoms of a Faulty Oxygen Sensor?

If the oxygen sensor is faulty, the engine malfunction indicator light will typically illuminate. Below are the symptoms of a faulty oxygen sensor: 1. Increased fuel consumption, as carbon buildup on the oxygen sensor can lead to abnormal signal output, causing an imbalance in the engine's air-fuel mixture ratio and higher fuel consumption. 2. Increased pollutant emissions, resulting in a failed annual vehicle inspection due to excessive exhaust emissions. Although the three-way catalytic converter can purify exhaust gases, its capacity is limited. If the oxygen sensor malfunctions, it can cause incomplete combustion in the engine, leading to higher pollutant emissions. Even if the catalytic converter is functioning properly, it may not be able to compensate. Therefore, if an older vehicle fails the emissions test during inspection, in addition to cleaning the catalytic converter, cleaning or replacing the oxygen sensor should also be considered. 3. Black smoke from the exhaust may indicate abnormal oxygen sensor operation, disrupting the air-fuel ratio and causing black smoke. 4. Unstable engine RPM and shaking can also result from an abnormal air-fuel mixture ratio.
7
5
Share

When Shifting Gears, Should You Shift First or Press the Clutch First?

When shifting gears in a manual transmission car, first release the accelerator, then press the clutch, shift gears with the clutch fully depressed, and then press the accelerator again. Below are the correct steps: 1. Master the operation of the clutch pedal through practice. Be steady and develop good habits: press the clutch all the way down and release it slowly. 2. Coordinate the accelerator and clutch properly. When starting, shift into first gear, slowly release the clutch, and press the accelerator when the clutch is halfway engaged. Only release the clutch completely after the car starts moving. 3. Learn the right timing for shifting gears. Shift when the engine speed is around 2000 RPM—first reduce the accelerator, then press the clutch to avoid forced disengagement, and then shift. The upshift sequence must be first gear → second gear → third gear → fourth gear → fifth gear; skipping gears is not recommended. Downshift based on speed and your car’s condition, usually when the engine speed drops below around 1500 RPM.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.