Where is the air filter for the Patrol located?

What does EOP mean in the automotive industry?

EOP: End-of-Production, translated as "end of mass production," refers to the termination of a product's lifecycle where mass production ceases. After this point, parts are generally no longer produced or supplied in bulk. However, to meet after-sales needs, production may sometimes be organized, often based on confirmed orders. Below are other automotive industry terms: 0-100 km/h acceleration: This refers to the time it takes for a car to accelerate from 0 to 100 km/h, commonly referred to as "how many seconds to break 100." The smaller the number, the better the power performance and the stronger the output. Moose test: This is an international standard for measuring vehicle safety. The name comes from the moose, but it doesn’t involve actually hitting them. Instead, it tests a vehicle’s ability to avoid obstacles by setting up barriers, measuring the limit speed at which the ESP stability control system loses control. 100 km/h braking: This refers to the time and distance required to come to a complete stop from a speed of 100 km/h, providing the most intuitive reflection of a vehicle’s braking performance. The shorter the distance and time, the better the braking performance.

1

5

Share

What is the fuel tank capacity of the Verna?

The 2020 Verna models all have a fuel tank capacity of 43L. The entire lineup is equipped with a 1.4L naturally aspirated engine paired with a 6-speed manual transmission (MT), and all models feature front-wheel drive. In the same vehicle class, the 2022 Polo has a fuel tank capacity of 42.5 liters, while the 2021 LIFE has a 40-liter tank. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by automakers is measured from the bottom of the tank to the safety limit, with additional space remaining from the safety limit to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount may exceed the specified capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with 'E' and 'F'. When the needle is close to 'E', it indicates low fuel, while nearing 'F' means the tank is nearly full.

6

2

Share

Which is better: Geely Jiaji vs Maxus G50 Plus?

Compared to the Geely Jiaji, the SAIC Maxus G50 Plus offers higher configurations and superior design in its class, with advantages in space comfort, spaciousness, and driving experience. It is an excellent choice whether for family outings or daily commuting. More details are as follows: SAIC Maxus G50 Plus: Features a 12.3-inch floating touchscreen and a 12.3-inch full LCD instrument panel, along with the intelligent PLUS Spider Smart Connectivity Assistant. This system allows one-step activation of in-car WeChat for sharing moods and locations, and integrates QQ Music, Himalaya, WeChat Reading, and other entertainment functions, making driving more enjoyable. The high-performance six-core system-level chip enables voice-activated conversations, ensuring the driver never feels alone and enhancing convenience. The seamless Bluetooth key does not rely on 4G networks, allowing keyless entry anytime, anywhere, making driving smarter and hassle-free. Geely Jiaji: Equipped with a 12.3-inch intelligent touchscreen with responsive controls, paired with a high-speed automotive-grade quad-core E01 chip for smart voice interaction. However, its response speed is slightly slower than the SAIC Maxus G50 Plus. Additionally, this model only offers in-car entertainment features and lacks the interactive entertainment capabilities of the SAIC Maxus G50 Plus.

8

2

Share

Should a sedan use 92 or 95 octane gasoline?

Sedans with naturally aspirated engines should use 92 octane gasoline, while those with turbocharged engines should use 95 octane gasoline. In addition to checking the appropriate gasoline grade in the car's manual, you can also find it on the fuel tank cap, which will be clearly marked. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Cars with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the use of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be tuned to use lower octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If a sedan occasionally uses the wrong gasoline grade, simply switch back to the correct grade after use. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended for low-grade gasoline, using high-grade gasoline by mistake will not cause damage, but the increase in octane number will change the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended for high-grade gasoline, using low-grade gasoline can cause engine knocking. Because the octane number is too low, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance will make the engine run very unstably. If the knocking is mild, it only increases noise without significant damage to the engine. However, if the knocking is severe, it indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on the pistons and cylinders, and in severe cases, cylinder scoring.

5

1

Share

What are the internal components of a car?

Engine, chassis, body, and electrical systems are the main internal components that constitute a car. A gasoline engine consists of the crankshaft connecting rod mechanism, valve train, fuel supply system, cooling system, lubrication system, ignition system, and starting system. Diesel engines use compression ignition, so they lack an ignition system. Engine: The engine is the power unit of a car. Its function is to convert fuel combustion into power, which then drives the wheels through the transmission system of the chassis, enabling the car to move. There are two main types of engines: gasoline and diesel. Chassis: The chassis supports and mounts the car engine and its components, forming the overall structure of the car. It receives power from the engine to enable motion and ensure smooth operation. The chassis consists of four parts: the transmission system, running gear, steering system, and braking system. Body: The body is mounted on the frame of the chassis and serves as the space for the driver, passengers, or cargo. Passenger cars and buses typically have a unibody structure, while trucks usually consist of a cab and a cargo compartment. The body is mounted on the frame of the chassis and serves as the space for the driver, passengers, or cargo. Passenger cars and buses typically have a unibody structure, while trucks usually consist of a cab and a cargo compartment. Electrical Equipment: Provides power for starting, driving, and auxiliary car facilities. It mainly includes the power supply, starting system, ignition system, as well as car lighting, signaling, and auxiliary electrical components.

17

2

Share

What is the fuel tank capacity of the Toyota IZOA?

Toyota IZOA has a total of 8 models. Among them, the IZOA 2021 Hybrid 2.0L E-Four models (including the Enjoyment Edition, Sport Edition, Premium Edition, and Base Edition) have a fuel tank capacity of 43 liters, while the other four models have a fuel tank capacity of 50 liters. All models in the series adopt a front-engine, front-wheel-drive layout. In the same vehicle class, the Toyota C-HR 2021 2.0L Elite Edition has a fuel tank capacity of 50 liters, and the Honda Vezel (Breeze) 2022 1.5L CVT Elite Smart Edition also has a fuel tank capacity of 50 liters. During actual refueling, the amount of fuel filled may exceed the calibrated capacity. This is because the fuel tank capacity specified by automakers is measured from the bottom of the tank to the safety limit level. There is additional space between the safety limit and the tank opening, which serves as a safety buffer to accommodate fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount filled may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with 'E' (Empty) and 'F' (Full). When the needle approaches 'E', it indicates that the fuel is nearly depleted, while nearing 'F' signifies sufficient fuel.

3

0

Share

Where is the air filter for the Patrol located?

What does EOP mean in the automotive industry?

What is the fuel tank capacity of the Verna?

Which is better: Geely Jiaji vs Maxus G50 Plus?

Should a sedan use 92 or 95 octane gasoline?

What are the internal components of a car?

What is the fuel tank capacity of the Toyota IZOA?

What does it mean if there is oil inside the spark plug?

What is the actual range of the Tesla Model 3?

How often should the Civic be serviced?

What are the reasons for the 8th generation Accord's air conditioning not cooling?