Where is the air filter element of the Volkswagen Magotan located?

1 Answers
JosiahLynn
07/30/25 7:17am
The air filter element of the Volkswagen Magotan is located in the engine compartment, either above the engine or inside the air filter near the battery. According to the maintenance manual, the air filter element should generally be replaced every 10,000 to 20,000 kilometers or during every other maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the buildup of sludge in the throttle. Function of the air filter element: It filters out particulate impurities in the air, ensuring that a sufficient amount of clean air enters the cylinders and preventing floating dust from being sucked into the engine, which can accelerate wear on the piston assembly and cylinders. Air filter element: It is a type of filter, also known as an air filter cartridge, air cleaner, or air filter. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filtration device. During operation, the engine inhales a large amount of air. If the air is not filtered, the suspended dust in the air will be drawn into the cylinders, accelerating wear on the piston assembly and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly problematic in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders. Dirty air filter: Using a dirty air filter while driving can lead to insufficient air intake into the engine, resulting in incomplete fuel combustion, unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The automobile air filter is a device that removes particulate impurities from the air, consisting of one or several components that clean the air. Its primary function is to filter out harmful impurities from the air before it enters the cylinders, thereby reducing early wear on the cylinders, pistons, piston rings, valves, and valve seats. Thus, before air enters the cylinders, it must pass through the fine filtration of the air filter. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have minimal dust and light blockage, it can be cleaned using high-pressure air blown from the inside out and reused. A severely dirty air filter should be replaced promptly.
Was this review help?
5
2
Share
More Forum Discussions

What are the differences between the 2019 and 2020 LaCrosse models?

The differences between the 2019 and 2020 LaCrosse models are: 1. Different maximum horsepower of the engine: The 2019 LaCrosse has a maximum horsepower of 241 hp; The 2020 LaCrosse has a maximum horsepower of 237 hp. 2. Different maximum power of the engine: The 2019 LaCrosse has a maximum power of 177 kW; The 2020 LaCrosse has a maximum power of 174 kW. Both the 2019 and 2020 LaCrosse models have the same dimensions of 5026mm in length, 1866mm in width, and 1462mm in height, with a wheelbase of 2905mm. They are equipped with a 9-speed automatic transmission, a top speed of 235 km/h, and the body type is a 4-door, 5-seater sedan.
9
1
Share

What is the difference between Super White and Pearl White?

Super White is ordinary white paint, while Pearl White is mixed with pearl powder, equivalent to metallic paint, but with a higher cost. A white car body gives a bright, lively, and generous impression. White is also a neutral color, blending with the external environment to create a clean and simple feeling. White has better visual recognition, which can improve driving safety, and has advantages such as appearing less dirty than black. More details are as follows: 1. Classification of white car paint: Generally divided into Ordinary White, Ivory White, Pearl White, etc. The so-called Pearl White adds a layer of pearl paint between the color paint and the clear coat, with its main component being mica. 2. Mica: Mica is a dioctahedral calcium layered silicate mineral, often found in aluminum-rich deposits. It is recognized as a standard metamorphic rock-forming mineral in low to medium-grade metamorphic rocks. When mica pigments containing titanium dioxide and iron oxide are added to the paint base, light shining on the mica particles first reflects the color from the titanium dioxide and iron oxide, then the light undergoes refraction inside the mica particles.
1
3
Share

How to Turn on the High Beam in a Car?

To turn on the high beam in a car: Nowadays, most vehicle light switches are either lever-type or knob-type, with lever-type being the most common. Pushing the lever forward one notch turns on the low beam, and pushing it another notch turns on the high beam. Pulling it back switches back to the low beam. If you push the high beam lever outward, the condition for turning on the high beam is that the low beam must be on, as it is not possible to activate the high beam from other light settings. Precautions for using the high beam: 1. When following another vehicle: To avoid affecting the driver ahead, turn off the high beam and maintain a sufficient distance; 2. When preparing to overtake: Turn on the overtaking signal to alert the vehicle in front, and after completing the overtake, you can switch back to your original lane and turn on the high beam to continue driving.
8
4
Share

What is a Car Key ID?

Car Key ID is the registration number of the key. Through this ID, car key users can look up parameters such as the manufacturer and operating frequency of the key. Additionally, the ID may be required when the key is lost or when duplicating a key. Car remote keys are wireless communication anti-theft devices that require manufacturer registration for use. The ID key fob is a read-only, contactless IC card. It is powered by induction from a card reader and reads the card number stored in the chip's EEPROM. The card number is written once before the card is sealed and cannot be altered afterward. Being passive and contactless are the key features of this chip. The radio frequency interface circuit is the critical core technology, receiving RF energy from the card reader to generate power and clock for the chip, and employing techniques like phase-shift keying and load amplitude modulation to achieve wireless communication between the card and the reader.
1
2
Share

How to Fold Car Mirrors?

Rearview mirror folding can be categorized into manual and electric types. 1. Electric mirrors are typically folded automatically via an operation button located on the driver-side door or the car's central console. Some models automatically unfold the mirrors when the vehicle is started. 2. Pressing the automatic folding button or rotating the knob to the folding position will simultaneously fold both side mirrors. Relevant information about car mirrors includes: 1. Location: Car mirrors are positioned on the left and right sides of the vehicle's front and inside the car's cabin. 2. Function: Rearview mirrors display conditions behind, beside, and below the car, allowing the driver to indirectly observe these areas. They act as a "second pair of eyes," expanding the driver's field of vision.
11
5
Share

How deep does a wheel hub scratch need to be before replacement is required?

If the wheel hub has been scratched, it does not need to be replaced; replacement is only necessary if the wheel hub has become deformed or cracked. The wheel hub is the central part of the wheel, mounted on the axle to support the tire. It is cylindrical in shape and typically fitted with bearings to reduce friction. Common types of wheel hubs include steel rims and aluminum alloy rims. Methods for repairing wheel hub scratches include: 1. Carefully inspect whether the scratch extends to the inner side of the wheel hub. If not, simply use paint thinner to gently wipe around the scratch; 2. Before repairing the scratch, cover the undamaged areas with tape to avoid accidentally applying paint to unaffected parts; 3. After trimming the brush tip, apply touch-up paint and allow it to dry, during which it will slightly shrink.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.