···
Log in / Register

Where is the air filter element of the Geely Vision located?

6Answers
Liam
07/28/2025, 08:13:40 PM

Geely Vision's air filter element is located behind the glove box, which needs to be removed first to access it. On the right side of the engine compartment, there is a rectangular box that houses the air filter. By releasing the clips, you can see the filter paper box. The air filter element is a type of filter primarily used for air filtration in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. The Geely Vision is Geely's first mid-level business-family sedan, with dimensions of 4599mm in length, 1747mm in width, and 1482mm in height, and a wheelbase of 2615mm. The entire Geely Vision lineup is equipped with a 1.5-liter naturally aspirated engine. The front suspension of this car uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.

Was this review help?
119
Share
DelHannah
08/11/2025, 11:25:33 PM

I just helped my neighbor fix his Geely Vision, and the air filter is located on the right side of the engine bay. To be specific, once you pop the hood, you'll see a black rectangular box connected to a thick pipe—that's the air filter housing. The lid is usually secured with a few plastic clips; just flip it open, and the filter is right inside. It's positioned near the base of the windshield for easy access, but be careful not to handle it when the engine is hot. DIY replacement is super simple: order a compatible filter online for just over ten bucks, remove the old one, check if it's clogged with dust, and pop the new one in. Regularly changing it every 10,000 km prevents engine strain, saves fuel, and reduces issues. I always remind my friends to check their filters, especially if they drive in dusty areas. After all, if air can't get in, the engine 'struggles to breathe,' hurting overall performance. Overlooking this small detail during routine maintenance is a big loss.

Was this review help?
18
Share
Expand All
LeJaxon
10/01/2025, 03:05:48 AM

After playing with cars for a long time, I've touched several Geely Vision's air filter positions, all located in specific areas of the engine compartment. For example, on the right side or in the middle, the intake pipe connects to a plastic box—just remove the clips or screws on the cover to see the filter. The position is well-designed to avoid misoperation of other parts. I always prioritize checking here during maintenance because a dusty filter can block airflow, making the engine unable to draw fresh air, resulting in poor performance and higher fuel consumption. If the filter is too old, the engine light might come on as a warning. When replacing it yourself, keep a screwdriver handy, open the box to clean out the dust before installing a new filter. It's recommended to replace it every six months to a year based on driving habits. Keeping the filter clean is basic car care knowledge—don't underestimate its role; in the long run, it can extend the car's lifespan and reduce repair costs.

Was this review help?
5
Share
Expand All
EmmettDella
11/14/2025, 09:05:25 PM

Friend, don't worry about where the air filter of Geely Vision is located. It's just a black box under the engine hood. Open the engine, look from the front of the car, and you'll see the air filter box connected by a thick tube on the right front side. The box cover can be easily opened by flipping the clips, and the filter inside looks like a large sheet of paper. Changing it yourself is very simple and takes only 5 minutes—turn off the engine, remove the cover, and replace the old one with a new one. Remember not to use too much force to avoid damaging the parts. The filter's position is easily accessible, designed to be user-friendly, making it suitable for DIY even for beginners. Check it regularly, and replace it when it's dirty to save fuel and protect the engine.

Was this review help?
8
Share
Expand All
HectorLee
01/04/2026, 10:42:17 PM

I've used the Geely Vision for many years, and the air filter is always conveniently located in the engine compartment. Open the hood and look for the air filter box on the right side. The cover is secured with clips—remove it to see the filter. It's positioned near the intake pipe, where the engine draws in air during operation. I recommend replacing the filter every 10,000–20,000 kilometers. Excessive dust buildup can restrict airflow, affecting acceleration and fuel efficiency. DIY replacement is safe: remove it when the engine is cold, check if the filter is dirty, and replace it—low cost and prevents unexpected issues. The clear location avoids mixing up parts, and checking it during maintenance saves hassle.

Was this review help?
4
Share
Expand All
LaKimberly
04/01/2026, 10:41:03 PM

When heading out with the Vista, I know exactly where the air filter is: inside the black box on the right side of the engine bay. Just unclip the few fasteners on the cover, and the filter is right there, ready to be replaced. The design makes it easy to handle yourself without any professional tools. How often you need to change it depends on your driving conditions—once a year for city driving with less dust, or more frequently if you're often on dusty rural roads. A dirty filter can cause big problems, restricting airflow to the engine, leading to poor performance and higher fuel consumption. I recommend checking its position whenever you pop the hood and ensuring the cover seals properly. Regular maintenance of this small part ensures safer driving with fewer risks.

Was this review help?
15
Share
Expand All
More Q&A

What is the Difference Between Direct Injection and Electronic Fuel Injection in Cars?

The differences between direct injection and electronic fuel injection in cars are as follows: 1. Fuel injection method: Electronic fuel injection sprays fuel into the engine's intake manifold, while direct injection sprays fuel directly into the engine's cylinder. 2. Different installation positions of the fuel injector: In multi-point electronic fuel injection, the injector is installed at the end of the intake manifold, and the fuel spray is directed into the intake ports of each cylinder; the air-fuel mixture is formed outside the cylinder. In direct injection, the injector is installed on the cylinder head, spraying fuel directly into the cylinder; the air-fuel mixture is formed inside the cylinder. 3. Different fuel injection pressures: Multi-point electronic fuel injection operates at pressures between 2.5bar and 4bar, while direct injection operates at pressures between 40bar and 400bar. 4. Different fuel supply system compositions: Multi-point electronic fuel injection does not have a high-pressure fuel pump, whereas direct injection includes one. 5. Different fuel injection start angles and durations: Due to lower injection pressures, multi-point electronic fuel injection requires a longer injection time under heavy loads, and the next injection cycle may need to start after the intake valve closes. However, direct injection occurs after the intake valve opens and can take place during both the intake and compression strokes. Direct injection lowers the cylinder temperature at the moment of compression, aiding in the cooling of the piston and cylinder liner, thereby reducing the engine's tendency to knock. As a result, direct injection engines can achieve a higher compression ratio, leading to improved thermal efficiency.
115
Share

What is the fuel consumption of the CR-V 2.4L 4WD Luxury Edition?

CR-V 2.4L 4WD Luxury Edition has a fuel consumption of 11.2L/100KM. Below are the detailed specifications of the Honda CR-V: 1. Drivetrain: The Honda CR-V comes in two versions: a two-wheel-drive model and a four-wheel-drive model. The four-wheel-drive version features a front-engine, four-wheel-drive system with an on-demand all-wheel-drive configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve drive cams for low-to-medium and high-speed operations, with automatic switching via electronic control. The VTEC system allows the engine to automatically adjust valve opening timing and lift based on driving conditions, thereby altering intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
108
Share

Will I Get Penalized for Driving with the Trunk Open While Carrying Items?

Driving with the trunk unclosed and in an open state is considered a traffic violation. Typically, traffic cameras do not capture this type of violation. However, if spotted by traffic police, the vehicle may be stopped, and a ticket will be issued for violating road traffic safety laws and regulations regarding road usage. Below are some precautions regarding the trunk: 1. Avoid storing flammable and explosive items: As the trunk is an enclosed space, temperatures can rise rapidly. Storing lighters, hairspray, or other flammable and explosive items in the trunk, especially during summer heat and long-distance travel, can lead to explosions with unimaginable consequences. 2. Avoid storing valuables: Keeping valuables, premium cigarettes, or fine liquor in the trunk is highly unsafe. Thieves are cunning, and it is absolutely inadvisable to leave valuables in the car trunk.
110
Share

Is Half Engagement Stepping on the Clutch Halfway?

Half engagement is stepping on the clutch halfway. Here is an introduction to half engagement: 1. Introduction: Clutch half engagement refers to the unstable connection state of the clutch, where the driver presses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and the driven plate to be in a state of both rotating and slipping. During the field driving test, drivers who are not yet proficient in operation and cannot complete the required actions within the specified time often use half engagement to reduce the vehicle speed, thereby extending the operation time. However, the rules for off-field driving tests do not allow the use of half engagement. 2. Half Engagement: Half engagement is when the clutch is between disengaged and engaged, and the transmission system is between connected and disconnected, providing a flexible power source. It is frequently used in complex road conditions, as well as during starting, turning, and short-distance following. When the clutch is in the half engagement state, the friction between the pressure plate and the friction disc is minimal.
103
Share

How to Turn on the Cold Air in the 7th Generation Accord?

The cold air in the 7th generation Accord can be turned on by pressing the A/C button. AUTO means to turn on, press it once, and the fan will start working. Here are more related introductions: 1. Air Conditioning Cooling Principle: After the air conditioner is powered on, the low-pressure steam of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure steam, which is then discharged to the condenser. At the same time, the outdoor air sucked in by the axial fan flows through the condenser, taking away the heat released by the refrigerant, causing the high-pressure refrigerant steam to condense into high-pressure liquid. It exchanges heat with the outdoor air to become medium-temperature and medium-pressure refrigerant liquid, which then enters the evaporator after being throttled and depressurized by the capillary tube, evaporating under the corresponding low pressure and absorbing the surrounding heat. 2. Air Conditioning Buttons: The left and right sides respectively adjust the cold and hot air for the driver and passenger. Blue represents cold air, and red represents hot air. Adjust both sides to the lowest blue area, which means pressing the blue button to the lowest state, and then press the A/C air conditioning switch button once.
109
Share

What Should You Ask the Dealer for When Buying a New Car?

When purchasing a new car, you should request complimentary items from the dealer such as window tinting, floor mats, small gifts like cakes and perfumes, full-coverage floor mats, and reflective vests for the vehicle. Below is an introduction to related automotive content: 1. Determining Factors: The quality of a vehicle's handling is primarily determined by three factors: power, suspension, and steering system. 2. Detailed Introduction: Power is the foundation of handling. Only with strong and smooth power output can a vehicle qualify to discuss handling; Suspension is the key to handling. Generally speaking, for two cars with similar power, the difference in handling depends on the suspension. A solid and resilient suspension ensures stable and reliable handling.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.