Where is the Air Filter Element Located on the Buick New Verano?

3 Answers
DelLuke
07/29/25 11:41am
Buick New Verano's air filter element is located on the left side of the engine compartment. Below is an extended introduction to the air filter element: 1. The air filter element of the Buick Verano should be replaced every 20,000 kilometers, and the owner can decide the replacement time based on the actual usage of the vehicle. 2. The filter element is the core component of the filter, made of special materials, and is a wearable part that requires special maintenance and care. 3. After the filter has been in operation for a long time, the filter element will have intercepted a certain amount of impurities, leading to increased pressure and reduced flow. At this point, it is necessary to clean it promptly. During cleaning, special attention must be paid to avoid deforming or damaging the filter element.
Was this review help?
14
5
Share
LaArcher
08/13/25 8:12pm
I've been driving a Buick Verano for two years, and the air filter location is quite intuitive and easy to find. Open the engine hood, and you'll typically see a rectangular plastic box on either the driver's side or the passenger side front—that's where the air filter is housed. The box cover has clips or screws; I usually loosen them with a screwdriver to remove the old filter and replace it with a new one. Replacing it every 10,000 kilometers or 12 months is ideal. A dirty air filter restricts airflow, reduces engine efficiency, and may even increase fuel consumption, so I check it regularly for peace of mind and cost savings. The first time might take a bit longer—refer to the manual or watch tutorial videos to get the hang of it. Always ensure the car is turned off for safe operation to avoid burns. Using high-quality filters during routine maintenance extends engine life, and DIY replacement saves trips to the repair shop. Familiarizing yourself with small component locations boosts driving confidence and reassurance.
Was this review help?
5
5
Share
Expand All
VanChristopher
10/08/25 5:57am
As a frequent DIY car repairer, the air filter design in the Buick New Verano is quite reasonable—it's located in the filter box within the engine compartment. Simply pop the hood, and you'll spot the black box on the driver-side front with quick-release clips for easy access. The filter follows standard sizing, so purchasing the same model for replacement is hassle-free—just a screwdriver and a few minutes' work. Emphasizing replacement every 15,000 km prevents dust buildup, reduces engine wear, and optimizes fuel efficiency and performance. DIY replacement saves costs while honing hands-on skills—cleaning the box interior during swaps ensures sealing and prevents air leaks, extending component lifespan. Always confirm the engine is cool before starting to avoid risks. Regular maintenance prevents minor issues from snowballing, saving both money and time—a practical tip shared with fellow car enthusiasts for simplicity and efficiency.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

Will the large gap between the headlight and bumper cause water ingress?

Car headlights and bumper gaps will not cause water ingress. The gap between the car headlight and bumper is an installation clearance, and generally, water will not enter the headlight to cause fogging or water accumulation inside the lamp cavity. However, if the gap is too large, it may affect the vehicle's aesthetics, so it is recommended to go to a 4S shop or repair shop for adjustment as soon as possible. The following is an introduction to car headlights and bumpers: 1. Car headlights: Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the owner's external image but are also closely linked to safe driving at night or in bad weather conditions. The use and maintenance of car lights should not be overlooked. 2. Bumper: The bumper is located in most areas at the front and rear of the car, and its functions are as follows: From a safety perspective, it can act as a buffer during low-speed collisions, protecting the front and rear body of the car; in accidents involving pedestrians, it can provide some protection for pedestrians. From an aesthetic perspective, it is decorative and an important component in decorating the car; at the same time, the car bumper also has certain aerodynamic effects.
13
4
Share

How to use the gear shift +- of the Envision?

The Envision is equipped with a manual-automatic gear shift. While driving, you can switch to manual mode by pressing +- to manually shift gears up or down. The instructions for using the Envision's gear positions are as follows: 1. P (Parking Gear): When entering this gear, the transmission locking mechanism activates, so it should only be engaged after the vehicle has come to a complete stop. 2. R (Reverse Gear): This gear is used for reversing. It can only be engaged after coming to a complete stop by pressing the brake while reversing; it cannot be engaged while the vehicle is moving. 3. N (Neutral Gear): The transmission is in neutral (idle gear), meaning no power is transmitted to the wheels, and the engine's braking effect cannot be utilized. 4. D (Drive Gear): One of the most commonly used forward gears, where the transmission automatically shifts gears.
10
0
Share

How to set the horn sound when locking the Volkswagen Bora?

The Bora does not have the horn sound enabled by default when locking the car. You need to visit a 4S dealership to update the data (via the OBD vehicle system to modify the settings). After enabling this feature, when you hear the horn sound upon locking the car, you can be assured that the doors are securely locked. Additional information: Below is an introduction to the horn function: 1. Meaning and Purpose: The horn is the audio signal device of a car. During driving, the driver can emit necessary audio signals as required or regulated to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals. 2. Working Principle: When the horn button on the steering wheel or other locations is pressed, current from the battery flows through the circuit to the electromagnetic coil of the horn relay. The electromagnetic coil attracts the moving contact switch of the relay to close, allowing current to flow to the horn. The current activates the electromagnet inside the horn, causing the diaphragm to vibrate and produce sound.
7
3
Share

How thick is the sidewall of a car tire?

Generally, the sidewall of a car tire is about 6mm thick, while the tread thickness is around 13mm (with a tread pattern depth of 7mm and a tread thickness of 6mm). The sidewall thickness is 5mm. Due to different aspect ratios, the thickness of the sidewall varies among different car models and tire specifications. Below is some relevant information about tires: 1. Benefits of increasing the rubber thickness of the sidewall: It can reduce the puncture rate, enhance tire strength, and help improve vibration damping performance. 2. Drawbacks of increasing the rubber thickness of the sidewall: It may reduce handling performance, increase tire manufacturing costs, add to the overall vehicle weight, and consequently increase fuel consumption.
18
5
Share

Which company owns the Ford brand?

Ford is a world-renowned automobile brand and one of the many brands under the American Ford Motor Company (Ford-Motor-Company). The American Ford Motor Company owns eight world-famous automobile brands: Ford, Lincoln, Mercury, Mazda, Aston Martin, Land Rover, Jaguar, and Volvo. Additional information: 1. The Ford logo features the word 'Ford' in white letters on a blue background. Since the founder, Henry Ford, liked small animals, the designer of the logo drew the English word 'Ford' to resemble a small white rabbit. 2. Ford Motor Company is one of the largest automobile manufacturers in the world. Founded in the early 20th century, Ford Motor Company, driven by founder Henry Ford's dream of 'building a car affordable for everyone' and his exceptional vision, has weathered a century of challenges to become one of the world's top four automobile group companies.
16
0
Share

What is the Audi Black Optics Package?

Black Optics Package is a glossy black modification accessory set from Audi. Here are the details about the Audi Black Optics Package: 1. Included accessories: The Black Optics Package includes accessories such as the grille, grille emblem, rear emblem, front splitter, front lip, rear diffuser, grille trim frame, door handle trim strips, window trim strips, and other parts. 2. Difference from other accessories: The Black Optics Package is an OEM blackened accessory kit. For example, if you choose the Black Optics Package for parts like the radiator grille, window aluminum trim, or roof, these components will all be in glossy black.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.