···
Log in / Register

Where is the air filter element located in the Buick Verano?

4 Answers
DiTyler
07/29/25 11:29pm

The air filter element of the Buick Verano is located in the air filter housing inside the engine compartment, next to the battery. According to the maintenance manual, the air filter element should generally be replaced every 10,000 to 20,000 kilometers or during every other maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the buildup of throttle sludge. Function of the air filter element: It filters out particulate impurities from the air, ensuring that sufficient clean air enters the cylinders and preventing airborne dust from being drawn into the engine, which can accelerate wear on the piston assembly and cylinders. Air filter element: It is a type of filter, also known as an air filter cartridge, air cleaner, or air filter. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filtration device. During operation, the engine draws in a large amount of air. If the air is not filtered, airborne dust particles entering the cylinders can accelerate wear on the piston assembly and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly problematic in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient clean air enters the cylinders. Dirty air filter: Using a dirty air filter while driving can lead to insufficient engine air intake, incomplete fuel combustion, unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The automobile air filter is a device that removes particulate impurities from the air, consisting of one or more filter components for clean air. Its main function is to filter out harmful impurities from the air before it enters the cylinders, thereby reducing premature wear on the cylinders, pistons, piston rings, valves, and valve seats. Thus, before air enters the cylinders, it must pass through the fine filtration of the air filter. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have minimal dust and light blockage, it can be cleaned by blowing compressed air from the inside out and reused. Excessively dirty air filters should be replaced promptly.

Was this review help?
1
2
Share
StOwen
08/16/25 2:17am

I've been driving the Verano for three years and have replaced the air filter twice. This thing is located on the right side of the engine compartment, near the windshield. There's a black rectangular plastic box with four or five plastic clips. Open the box lid and you'll see the pleated paper filter inside. Remember to clean out any debris in the box before replacing it - once I found a leaf stuck inside. It's recommended to check it every 10,000 km or every six months, especially during spring in northern areas when poplar catkins are abundant. Changing it myself is super convenient - I buy the matching model online for 30 yuan, half the price of a dealership. It takes just five minutes and doesn't even require tools.

Was this review help?
13
1
Share
Expand All
McConnor
10/19/25 2:24am

As someone who frequently works on cars, the Buick Verano's air filter location is quite typical. Open the hood, and you'll see a black plastic square box on the right side near the base of the windshield on the driver's side. That's the air filter housing. Just press the clips on top to open it, and you'll find a pleated paper filter inside. Make sure to install the new filter in the same orientation as the old one—there's an arrow inside the housing for reference. I've seen cases where people installed it backward, causing airflow issues. The design is quite reasonable, making replacement straightforward. If your car experiences sluggish acceleration or a sudden increase in fuel consumption, it's likely due to a clogged filter needing replacement.

Was this review help?
3
1
Share
Expand All
VanHeidi
12/02/25 2:58am

Last time I serviced my Verano, I just learned how to change the air filter. It's located at the front right of the engine bay, inside a black plastic box about the length of a palm. You can see it when you lift the hood—the cover is secured with a few plastic clips. When I pulled out the old filter, it was completely covered in dust. The mechanic said it's best to replace it every six months for city driving. I tried it myself—buying the same model filter and installing it was easy, just make sure not to put it in backward. Now that it's hot, the AC smells much better thanks to the timely filter change. The location is easy to find, and the process is simple—even a woman can handle it effortlessly.

Was this review help?
5
2
Share
Expand All
More Forum Discussions

How to Reactivate ETC After Detachment?

Methods to reactivate ETC after detachment: 1. Insert and remove the ETC card twice consecutively until the electronic tag screen displays 'Bluetooth On' or directly press the button on the top of the electronic tag to activate Bluetooth; 2. Turn on Bluetooth on your phone, open the app mini-program, download the corresponding mobile app based on the electronic tag's brand, and enter the device activation interface; 3. Click 'Device Connection', select the device model to be connected, and patiently wait for the successful connection prompt; 4. After successful connection, follow the prompts to verify and upload a photo of the vehicle's front face to complete activation. Wait for 3 to 5 days for review, and it can be used normally after approval.
19
1
Share

Is the Tire Ruined After Driving a Distance Without Air?

Not necessarily. However, it is not recommended to continue driving with low tire pressure. The specific consequences are as follows: Consequences: Driving with insufficient air pressure can cause excessive flexing of the tire body, which generates high heat. The inner liner rubber may burn into black spots, leading to separation between the rubber and the tire cord fabric. In more severe cases, the inner liner rubber may melt due to high heat, causing structural damage to the tire. Safety Hazards: Continuing to drive with weakened tire strength may eventually lead to tire failure or even a blowout, posing significant safety risks.
8
3
Share

What is the appropriate tire inflation pressure for sedans?

Tire inflation pressure is generally maintained at 2.2-2.5 bar, which is considered appropriate. In summer, it should be slightly lower. Effects of abnormal tire pressure: Excessive tire pressure reduces the friction and adhesion of the tires, increases the risk of tire blowouts, and affects driving safety. Insufficient tire pressure not only causes steering difficulties and vehicle deviation, which are detrimental to driving safety, but also damages the tires. Seasonal factors affecting tire pressure: In winter, it is advisable to increase the standard tire pressure by approximately 0.2 bar. In summer, follow the lower limit of the standard tire pressure. For vehicles parked outdoors in summer, the pressure can generally be about 0.1 bar lower than the standard to prevent high-temperature blowouts.
2
5
Share

What is the rod connecting the wheels called?

The rod connecting the wheels is called the car suspension. Definition of car suspension: The suspension system refers to all the force-transmitting connection devices between the car frame and the axle or wheels. Its function is to transmit forces and torques between the wheels and the frame, buffer the impact from uneven roads to the frame or body, and dampen the resulting vibrations to ensure smooth driving. Non-independent suspension system: The structural feature of a non-independent suspension system is that the wheels on both sides are connected by an integral axle, and the wheels together with the axle are suspended under the frame or body through an elastic suspension system.
20
0
Share

Will an Electric Car Stall When Wading Through Water?

It can stall. Generally, deep water wading primarily tests the sealing of car doors and the passenger compartment. Additionally, electric vehicles have specified wading depths, and exceeding them is not recommended. Below are the reasons: Poor Sealing Solutions: The sealing of the power output shaft. If the water level exceeds the power output shaft, water can quickly enter the transmission and then the motor. Short Circuit: Power sources, cables, and inverters. If the water level is too high, these components are prone to short circuits because water can enter through any gaps. Poor Contact: The electrical control system and sensor lights in cars typically use traditional connectors. After being submerged in water, they may experience poor contact and short circuit issues.
2
4
Share

What are the reasons why a car won't start in cold weather?

The reasons why a car won't start in cold weather are: 1. The car battery is dead; 2. Low temperature causes the viscosity and rotation speed of the engine oil to decrease; 3. There is a problem with the ignition system; 4. Insufficient fuel in the car; 5. Excessive carbon deposits inside the vehicle's engine; 6. The fuel pump is damaged, preventing fuel in the fuel tank from being supplied for combustion. The solutions for a car that won't start are: 1. Check if the battery is dead; 2. Check if the fuel pump is damaged; 3. Check if there is sufficient fuel; 4. Check if the engine sensors are damaged; 5. Check if there is a problem with the ignition system; 6. Use a heating rod to warm up the engine oil.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.