Where is the air conditioning temperature control switch located on the new Lavida?

1 Answers
MacFinley
07/29/25 11:44am
The air conditioning temperature control switch of the Volkswagen Lavida is located below the center console. Press the AUTO button to activate the air conditioning system. The dimensions of the Volkswagen Lavida are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. The car's engine has a maximum horsepower of 150Ps, a maximum power of 110kW, and a maximum torque of 250Nm. Relevant information is as follows: 1. The Lavida's air conditioning is automatic, with automatic control of temperature, air volume, and flow distribution, automatically maintaining the indoor air. 2. The temperature controller is an electrical switch device that controls the temperature of the air-conditioned room. 3. The temperature range controlled by the temperature controller in the air-conditioned room is generally between 18 degrees and 25 degrees.
Was this review help?
6
0
Share
More Forum Discussions

What is the width of the Jetta car?

The width of the Jetta car is 1841mm, the length is 4419mm, and the height is 1616mm, which are official data. The length of the Volkswagen Jetta refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The Jetta is equipped with a manual transmission, with a maximum power of 110kw, a maximum torque of 250nm, a maximum power speed of 6600 revolutions per minute, and a maximum torque speed of 3000 revolutions per minute. There are relevant national regulations regarding the dimensions of vehicles. According to the national standard "GB1589-89," the total width of a vehicle does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, the significance of vehicle width data in the national standard is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
20
3
Share

What does the DEF indicator on the JMC Transit instrument panel mean?

JMC fault light DEF refers to the indicator light of the car's auxiliary water tank, indicating that the auxiliary water tank is short of water. The auxiliary water tank needs to be filled with water immediately to eliminate the fault. The following are related introductions: 1. Auxiliary water tank shortage: It needs to be added immediately. If it is a problem with the internal instrument processor, it needs to be dealt with immediately at the 4S store in the area. The car dashboard is a device that reflects the working conditions of various systems of the vehicle. 2. Function: The main function of the car auxiliary water tank is that when the car engine temperature is high, the liquid expands, and part of the antifreeze flows into the auxiliary water tank through the water tank cap; when the temperature drops and the cooling system pressure is negative, the system sucks the antifreeze in the auxiliary water tank into the cooling system through the water tank cap. At the same time, the auxiliary water tank is marked with corresponding scales to indicate the level of the liquid.
10
3
Share

What Does Tire Pressure Mean?

The tire pressure of a car refers to the air pressure inside the tire. According to the international GBT2978-2008 standard, the normal tire pressure for different types of tires is as follows: standard tires: 2.4-2.5bar; reinforced tires: 2.8-2.9bar; maximum pressure: should not exceed 3.5bar. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of the tread pattern in the center of the tire, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Excessive stretching of tire cords, reducing elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. Sharp objects like nails or glass can more easily penetrate the tire, leading to internal cracks or blowouts. Hazards of insufficient tire pressure: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement of tire parts, leading to abnormal heat due to excessive rolling; Reduces the functionality of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; Dramatically increases friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to blowouts; Increases tire deformation, making the sidewalls prone to cracks and generating flexing motion, leading to excessive heat, rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area and accelerating shoulder wear.
5
5
Share

Where is the air conditioning filter located in an old Audi A6?

The air conditioning filter in an Audi A6 is located inside the glove compartment on the passenger side. Here is some relevant information: 1. Introduction: The car air conditioning system refers to the air conditioning device installed in the vehicle, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. 2. Structure: It generally includes a cooling device, heating device, and ventilation device. This combined system makes full use of the limited space inside the car, with a simple structure and easy operation, making it a popular modern car air conditioning system internationally.
8
1
Share

What is the oil specification for Mercedes-Benz GLC?

The oil specification for Mercedes-Benz GLC is 5W40, which uses fully synthetic oil with a replacement cycle of 10,000 kilometers. For later maintenance oil changes, you can choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of the oil changes with temperature, so special attention is needed to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The latter number represents the oil's kinematic viscosity at 100°C. The higher the value, the better it maintains viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in a Mercedes-Benz GLC is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Loosen the oil drain plug with a wrench and use an oil pan to collect the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain; Remove the oil filter with a specialized wrench; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the engine valve cover filler port, typically filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for oil leaks around the drain plug and oil filter. If leaks are found, perform repairs; After stopping the engine, pull out the oil dipstick and check that the oil level is within the standard range.
3
5
Share

What is the detailed explanation of the center console buttons for the 7th generation Accord?

The largest button on the 7th generation Accord's center console is the confirm button. The up, down, left, and right buttons are for previous track, next track, fast forward, and rewind respectively. The first button on the left is for brightness adjustment, and the one below it is the audio power button. Below is some relevant information about the Accord: 1. Pros and Cons: The Accord features natural and smooth body lines, with a design that blends fashion and dynamism while maintaining a sense of stability. However, its power performance is average; some car owners have reported issues such as thin and soft paint, weak braking, and noticeable road noise. 2. Exterior Design: The Accord's body lines are clean and flowing, combining a fashionable and dynamic appearance with an elegant demeanor. The new rear design is eye-catching: it uses LED high-mounted brake lights and elegant triangular combination taillights, commonly found in luxury models, creating a simple yet striking impression along with the unique wide license plate panel, giving off an air of sophistication and stability.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.