Where is the air conditioning temperature control switch in Volkswagen cars?

How to Replace Brake Lights?

First, use a Phillips screwdriver or socket to remove the bolts, then pull the lamp assembly out from the rear pillar. Turn the socket counterclockwise and remove the old bulb. Slide the lamp assembly into the guide slots on the vehicle body. Finally, align the pins with the body washers and push them in until they are fully seated.

12

2

Share

How to Adjust Valves for a 4-Cylinder Engine?

Rotate the first cylinder to the compression top dead center (align the mark on the crankshaft pulley or flywheel with the 0 scale or the pointer in the timing gear housing). Adjust the exhaust valves of cylinders 1, 2, and 3. Then rotate 360° and adjust the exhaust valve of cylinder 2, the intake valve of cylinder 3, and both intake and exhaust valves of cylinder 4.

17

3

Share

What are the steps for adding coolant?

When the large reservoir is filled to approximately 4kg and the small reservoir to around 2kg, start the engine and turn on the heater to expel any moisture and air. While keeping the engine running, continue adding coolant until it reaches the normal operating level. Do not add the coolant too quickly. Monitor the process dynamically while filling to prevent spills or leaks.

11

5

Share

Why is the wireless charging not working in the Hongqi H5?

The wireless charging in the Hongqi H5 may not be working due to a faulty electrode. Here is some knowledge about the Hongqi H5: 1. Layout: The overall layout is simple and stylish. The interior features multiple areas wrapped in soft materials, complemented by chrome trim accents, significantly enhancing overall comfort, texture, and a sense of premium quality. The predominantly black interior color scheme also adds a touch of solemnity. 2. Features: In terms of features, it is equipped with a three-spoke multifunction steering wheel, a 7-inch LCD instrument cluster, and a 10-inch floating central control screen. Other features include an electronic gear shift, 64-color ambient lighting, front-row wireless phone charging, and more, making the overall configuration highly advanced and tech-savvy. In terms of power, the Hongqi H5 is equipped with two engine options: a 1.5T and a 1.8T+48V mild hybrid system, paired with a 7-speed dual-clutch transmission and a 6AT transmission, delivering maximum horsepower of 169 hp and 197 hp, and maximum torque of 258 Nm and 320 Nm, respectively.

19

0

Share

Is It Normal for an Automatic Transmission to Make a Clicking Sound When Shifting to Reverse?

A very slight clicking sound is normal because the reverse lock mechanism engages when shifting into reverse gear. Therefore, a faint clicking sound may occur. However, if the sound is loud, it is necessary to inspect the reverse lock mechanism. It is recommended to visit a repair shop for a check-up. Additional relevant information is as follows: 1. Automatic Transmission: As the name suggests, it eliminates the need for the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. 2. Automatic transmission vehicles typically have six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). Driving an automatic car using only P (Park), R (Reverse), N (Neutral), and D (Drive) gears can fully meet general driving needs. However, in certain special driving conditions, other functional gears may be required. Therefore, with the correct operation and control, an automatic transmission car can perform better than a manual one. 3. Engine power is transmitted through the transmission: The transmission is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. Regardless of whether it's a manual or automatic transmission, more gears usually result in better fuel efficiency.

7

1

Share

Why does the car alarm go off for no reason?

The reasons why the car alarm goes off for no reason are as follows: 1. Controller failure: It may be a fault in the alarm itself or a fault in the triggered sensor. 2. The trigger sensitivity is too high: irregular alarms will interrupt rest. 3. The door switch, hood switch, or trunk switch is closed: the door is not closed tightly. The trigger wire is grounded, which means the wire is short-circuited. It will keep sounding until the battery runs out of power. In such cases, you can adjust the sensitivity of the alarm on the anti-theft control box. Generally, the anti-theft control box is installed under the dashboard. After disassembling, you can see it, and there is a spiral knob on it that can be rotated to adjust the sensitivity. It is recommended to reduce the sensitivity to a state where the car does not alarm when you kick the tire. When parking, it is recommended to use the silent mode of the anti-theft device. The anti-theft device can still prevent theft even without sound. When the control circuit starts the car abnormally, it will automatically cut off the power and sound the alarm, activating the audible anti-theft mode. If the anti-theft device detects continuous vibration and keeps sounding, it will affect others' rest and consume the car's power.

20

2

Share

Where is the air conditioning temperature control switch in Volkswagen cars?

How to Replace Brake Lights?

How to Adjust Valves for a 4-Cylinder Engine?

What are the steps for adding coolant?

Why is the wireless charging not working in the Hongqi H5?

Is It Normal for an Automatic Transmission to Make a Clicking Sound When Shifting to Reverse?

Why does the car alarm go off for no reason?

What to Do When the Haval H6 Engine Yellow Light is On and Lacking Power?

How to Adjust Solar Tire Pressure Monitoring?

How to Turn on the Heater?

How to Remove the Cabin Air Filter of Haval H6?