Where is the air conditioning refrigerant charging port located on the Mercedes-Benz R350?

Why Can't the Car Start After Washing?

After washing the car, the first thing to check is whether the air filter and carburetor have been exposed to water. If the air filter and carburetor are clean, the car should start. If there is no water in the air filter and carburetor, the issue is usually caused by water or moisture in the ignition circuit or electrical components. In this case, no repair is needed; the car can only start after being thoroughly dried. The water guns used in professional car washes are very particular. The water pressure for rinsing should be between 7 MPa. If the pressure is too low, the car won't be cleaned properly. If the pressure is too high, the paint layer may be damaged by the impact of water carrying sediment from the paint surface. The car washing process consists of several steps: preparation, fetching the car, washing, foaming, exterior cleaning, interior cleaning, and inspection.

4

Share

What is the 0-100km/h acceleration time of the Teana 2.0T?

The 0-100km/h acceleration time of the Teana 2.0T is 6.9 seconds. Introduction to 0-100km/h acceleration: 0-100km/h acceleration refers to the time it takes for a vehicle to accelerate from 0 to 100km/h, which is the most intuitive reflection of a car's power. Generally, 1.6L compact cars have an acceleration time between 11 to 13 seconds, 2.0T mid-size sedans between 7 to 8 seconds, while supercars mostly have acceleration times less than 3.8 seconds. Principles of 0-100km/h acceleration: Among vehicles with the same displacement, models equipped with turbocharged engines have obvious advantages in 0-100km/h acceleration because they output more powerful torque and have a very wide maximum torque output range, allowing the vehicle to achieve maximum acceleration capability at very low RPMs.

5

2

Share

How to Measure Distance with Parking Sensors?

Distance is judged by sound. Here is an introduction to the method of judging distance with parking sensors: 1. The alarm emitted by the parking sensor is a certain frequency of "beep" sound, and the frequency will become faster and faster as the obstacle approaches. Since the settings of parking sensors vary for different car models, there is no one-size-fits-all answer, and it can only be gradually figured out over time. However, one thing is the same for all car models: when the "beep" sound frequency becomes faster and faster and eventually turns into a continuous sound, it means that the parking distance has almost reached its limit. 2. Parking sensors generally consist of three parts: ultrasonic sensors, a controller, and a buzzer. During operation, the ultrasonic sensors emit ultrasonic waves outward. When the ultrasonic waves hit an obstacle, they are reflected back and received again by the ultrasonic sensors. The controller then calculates the actual distance of the obstacle based on the time it takes for the ultrasonic waves to be emitted and received. Finally, the buzzer emits a rapid alarm sound to alert the driver to the distance of the obstacle.

3

5

Share

Can a luggage rack be installed on the roof of a car?

Yes, a luggage rack can be installed on the roof of a sedan. Here are some relevant details: 1. Some imported cars even have pre-drilled screw holes on the roof for installing luggage racks. However, installing a luggage rack or placing luggage on the roof must comply with regulations; if it doesn't meet the requirements, it's not allowed. 2. Luggage racks are popular among car enthusiasts who enjoy long-distance road trips. After installing a luggage rack, a roof-mounted cargo box can be added to carry more items. Sedans, in particular, benefit from roof luggage racks and cargo boxes because their trunks are relatively small and have limited carrying capacity. 3. When installing a luggage rack, it's essential to purchase genuine products from reputable brands. The same applies when buying a roof cargo box. Car owners should never opt for cheap, low-quality products to save money. During installation, it's crucial to ensure everything is securely fastened; otherwise, the luggage rack or cargo box could detach at high speeds, posing a serious safety hazard.

6

4

Share

Which manufacturer produces the Jetta VS7?

Jetta VS7 is a joint venture car, a brand established and produced by the joint venture between FAW Group and Volkswagen Group of France. Jetta VS7 dimensions: It is manufactured using Volkswagen's platform and also utilizes Volkswagen's engine. The Jetta VS7 is a mid-size SUV under the Jetta brand, with a length of 4624 mm, width of 1841 mm, height of 1644 mm, and a wheelbase of 2730 mm. Jetta VS7 engine: The entire lineup is equipped with a 1.4-liter turbocharged engine, model code EA211-DJS. This engine has a maximum power output of 110 kW and a maximum torque of 250 Nm. The engine reaches its peak torque between 1750 and 3000 rpm, and its maximum power output is achieved between 5000 and 6000 rpm. The engine features DVVT technology, direct fuel injection, and an aluminum alloy cylinder head and block.

7

4

Share

Where is the outdoor temperature sensor located on the BMW E60?

The outdoor temperature sensor on the BMW E60 is located in the center of the front grille, slightly to the right. Principle of the outdoor temperature sensor: The car's outdoor temperature sensor detects the ambient air temperature and transmits the detected temperature to the engine's ECU, converting it into an electrical signal. This determines the automatic air conditioning's temperature setting without manual intervention, adjusting the air conditioning to the most suitable temperature. The outdoor temperature sensor is a sensing component of the automatic air conditioning control system, while the outdoor defrost temperature sensor primarily detects the temperature of the outdoor condenser coil. Function of the temperature sensor: When the outdoor coil temperature remains below -6 degrees Celsius continuously for 2 minutes, the indoor unit switches to defrost mode. If the resistance value of the outdoor coil sensor is too high, the indoor unit cannot operate normally. The outdoor temperature sensor uses a negative temperature coefficient thermistor as its detection element. The detection method for the outdoor temperature sensor is the same as that for the coolant temperature sensor, and its resistance value can be measured using a multimeter in resistance mode.

5

2

Share

Where is the air conditioning refrigerant charging port located on the Mercedes-Benz R350?

Why Can't the Car Start After Washing?

What is the 0-100km/h acceleration time of the Teana 2.0T?

How to Measure Distance with Parking Sensors?

Can a luggage rack be installed on the roof of a car?

Which manufacturer produces the Jetta VS7?

Where is the outdoor temperature sensor located on the BMW E60?

What does Audi 4045 mean?

How to Study for the Theoretical Part of Subject Three?

What is the fuel consumption of the new Alto automatic transmission?

Where is the battery located in the Mercedes-Benz A160?