···
Log in / Register

Where is the air conditioning filter of Zotye T500 located?

3 Answers
SanRafael
09/01/25 7:26am
The air conditioning filter of Zotye T500 is located inside the glove box on the passenger side. To replace the air conditioning filter, the glove box on the passenger side needs to be removed. Below is more information about the air conditioning filter: 1. Introduction: The car air conditioning filter is a filter specially designed for air purification inside the car cabin, made of high-efficiency adsorption material activated carbon and long-fiber non-woven fabric composite activated carbon filter cloth. 2. Function: The air conditioning filter ensures that the air conditioning grid fits tightly to the shell, preventing unfiltered air from entering the cabin; it also separates solid impurities such as dust, pollen, and tiny particles from the air. 3. Replacement frequency: The replacement frequency of the car air conditioning filter depends on the owner's driving conditions. Generally, for urban household cars, it should be replaced every six months.
Was this review help?
13
2
Share
ChaseMarie
09/14/25 3:12am
I've been driving the Zotye T500 for several years. The cabin air filter is located behind the glove box. First, you need to open the passenger-side glove compartment, squeeze the clips on both sides inward to remove it entirely. Inside, there's a plastic cover plate; unscrew it to reveal the filter. I often change it myself, roughly every six months, saving the cost of going to a repair shop. The filter isn't expensive—buying a compatible one online costs just a few dozen yuan, and it's quite easy to replace. Remember to turn off the AC before starting, or it might blow dust and dirty the interior. The location isn't complicated, even beginners can give it a try. Cleaner air in the car makes driving more comfortable, especially for families with children, as it can reduce allergies and such.
Was this review help?
12
1
Share
Expand All
StCassandra
10/28/25 3:53am
I remember being quite confused when I first tried to locate the cabin air filter in my new car. Later, a friend told me it's right behind the glove box. Simply put, open the passenger side glove compartment, press the clips to remove it, and you'll see a small panel - just unscrew that. I followed a YouTube tutorial to replace it. The first time took me a few minutes as I was unfamiliar, but I got the hang of it quickly. Changing the filter is important as it improves air freshness inside the car, especially during hot summers when there are more bacteria. Doing it myself saves both hassle and money, and no special tools are needed. Regular replacement makes my driving experience much more comfortable.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

How to use the cigarette lighter in Audi A6L?

Audi A6L cigarette lighter usage method: 1. Turn on the car power and insert the cigarette lighter into the car power socket; 2. Press down to lock; 3. The cigarette lighter starts heating and will pop out when the heating wire reaches the required temperature. Taking the Audi A6L 2021 40TFSI Luxury Elegance model as an example, it is equipped with a 2.0T 190 horsepower L4 turbocharged engine, with a maximum power of 140 kW and a maximum torque of 320 Nm. The Audi A6L 2021 40TFSI Luxury Elegance model has body dimensions of: length 5038mm, width 1886mm, height 1475mm, and a wheelbase of 3024mm.
5
1
Share

Is the first maintenance of a new car free?

Is the first maintenance of a new car free? The first maintenance is free, and it is performed when the car has traveled approximately 5,000 kilometers. It refers to the first maintenance after the vehicle has been driven. The maintenance items include: 1. Changing the engine oil, oil filter, air conditioning filter, and air filter; 2. Checking the levels of coolant, battery fluid, and windshield washer fluid; 3. Checking the brake and clutch fluid levels and the power steering fluid level; 4. Inspecting all oil pipe interfaces in the system for leaks; 5. Checking the front and rear lights; 6. Checking tire pressure and wear, and tightening screws according to the specified torque. The precautions for the first car maintenance are: 1. Make an appointment with the 4S store in advance; 2. Bring the vehicle license and maintenance manual.
10
4
Share

Where is the headlight height adjustment button for the 10th-generation Accord?

The headlight height adjustment for the 10th-generation Accord is located in the engine compartment. There is a white plastic screw behind each headlight. Turning it clockwise with a flat-head screwdriver will raise the headlight, while turning it counterclockwise will lower it. Always switch to low beams in advance when meeting oncoming traffic to avoid sudden glare. Avoid using high beams when overtaking, as this can impair your judgment of width. When encountering oncoming vehicles using high beams, slow down to a safe speed and alternately flash your high and low beams as a signal. For roads beyond blind spots, you can use your horn as a warning. The Accord's body dimensions are 4930mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 2775mm. It features front-wheel drive and has a 65-liter fuel tank.
19
1
Share

What should be noted when using a new car?

Things to note when using a new car are: 1. The car needs to warm up after starting; 2. Avoid overloading; 3. Do not drive long distances or at high speeds; 4. Use higher quality fuel; 5. Shift gears in a timely manner; 6. Do not slam on the brakes during the break-in period; 7. Avoid frequent use of emergency braking. New car maintenance items include: 1. Changing the engine oil, oil filter, and cleaning the air filter; 2. Checking whether the car's coolant level is normal; 3. Inspecting the car's brakes and undercarriage components for scratches; 4. Checking if the power steering fluid level is normal and if there are any oil leaks at the pipe connections; 5. Examining the condition of the generator, air conditioning, water pump, and belts for aging and tension; 6. Checking tire pressure and wear condition, and rotating the tires if there is wear.
12
0
Share

How to Remove the Steering Wheel of a Chery A3?

Method to remove the steering wheel of a Chery A3: 1. Disconnect the battery; 2. Turn the steering wheel approximately 90 degrees; 3. Insert a flat-head screwdriver into the hole behind the steering wheel; 4. Insert the tip of the screwdriver between the retaining clip and the airbag hook, causing the airbag side to automatically pop slightly towards the seat; 5. Turn the steering wheel 180 degrees and continue to pry open the retaining clip; 6. Remove the airbag, disconnect the yellow safety clip behind the airbag, and take out the airbag; 7. Unplug the airbag coupling coil connector located above inside the steering wheel, and use an M12 spline to loosen the central fixing bolt of the steering wheel counterclockwise; 8. Remove the steering wheel.
15
1
Share

How to Use the Mechanical Key of Sagitar?

The method to use the mechanical key of Sagitar is as follows: 1. Insert the key into the ignition and turn it to the 'on' position; 2. Place the gear lever in the neutral position; 3. Press the clutch pedal all the way down and turn the key to the 'start' position. Taking the 2021 manual Fashion Smart Connection Edition Sagitar as an example, its body dimensions are: length 4753mm, width 1800mm, height 1462mm, with a wheelbase of 2731mm, a fuel tank capacity of 50 liters, and a minimum ground clearance of 2731mm. The 2021 manual Fashion Smart Connection Edition Sagitar features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.