Where is the air conditioning filter of Zotye SR9 located?

What are the reasons for no hot air coming out of the air conditioning heating?

There are several reasons why a car's air conditioning does not produce heat: 1. The vehicle has just started: The engine temperature has not yet risen, and it will work after the car warms up. 2. Insufficient coolant: A lack of coolant can also cause the car's air conditioning not to produce heat, and adding coolant will solve the issue. 3. Damaged water pump: This can lead to a failure in the coolant circulation system, causing the car's air conditioning not to produce heat, and replacing the water pump will fix it. 4. Clogged heater core or radiator: If hot water from the engine cannot circulate into the radiator, the air conditioning will not produce heat, and cleaning the heater core will resolve the problem. 5. Faulty radiator fan: If the radiator fan runs continuously, it will dissipate heat constantly, making it difficult for the coolant inside the radiator to warm up, leading to the air conditioning not producing heat. Inspecting and repairing the radiator fan will solve the issue.

19

2

Share

What is the battery model for a Skoda car key?

The battery model for a Skoda car key is CR2025. CR2025 is a lithium manganese dioxide battery, named according to the IEC standard. The naming convention is as follows: C - Indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R - Indicates that the battery is cylindrical in shape; if it were square, F would be used instead; 20 - Indicates the battery diameter is 20mm; 25 - Represents the battery height is 2.5mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity varies between 140-170mAh. The shelf life of a CR2025 battery is typically 5 years. If the manufacturer's production standards are low or quality control is poor, the lifespan can be significantly shorter. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can be extended further, up to 8 or even 10 years. Generally, replacing a car key battery involves the following three steps: Step 1: Remove the mechanical key. Press the lock button on the side of the smart key to remove the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep groove and a shallow groove at the top of the smart key. The deep groove is the keyhole, while the shallow groove is used to open the battery cover. Insert the mechanical key into the shallow groove and pry it open with force to reveal the battery cover. Once opened, you will see the button battery, which can be easily removed with a gentle push. Step 3: Replace the battery. Install the new battery, then reattach the battery cover and mechanical key in sequence to complete the battery replacement.

16

4

Share

What is the function of the Anti-Slip Regulation (ASR)?

The function of the Anti-Slip Regulation (ASR) system is to control the slip within a certain range during vehicle acceleration, preventing the drive wheels from slipping excessively, thereby improving the directional stability and steering control capability of the vehicle during braking. The ASR system enhances traction and maintains the driving stability of the vehicle. On slippery roads, vehicles without ASR are prone to wheel spin during acceleration; rear-wheel-drive vehicles may experience fishtailing, while front-wheel-drive vehicles may lose directional control. With ASR, the vehicle can either prevent or mitigate such phenomena during acceleration. The principle is that when the computer detects a drive wheel slipping, it automatically reduces the engine's power output and applies braking to the slipping wheel until normal wheel rotation is restored. The role of ASR is to control the tire slip rate within a certain range during acceleration, preventing the drive wheels from losing power due to slipping or causing safety issues due to excessive power output. One of its functions is to improve traction, and the other is to maintain stable vehicle operation. On slippery roads, vehicles without ASR are prone to wheel spin during acceleration; rear-wheel-drive vehicles may fishtail, while front-wheel-drive vehicles may lose directional control. With ASR, the vehicle can either prevent or mitigate such phenomena during acceleration.

19

4

Share

Where is the Vehicle Identification Number?

Automobile identification code is an indispensable tool for identifying a vehicle. There are several ways to check it: 1. The vehicle VIN code is usually located at the lower left or lower right corner of the front windshield. 2. Check the car trunk or engine frame. 3. Check the vehicle's factory nameplate and certificate of conformity. 4. The vehicle VIN code can also be found on the car invoice, insurance policy, vehicle license, and registration certificate. Here is more information about the vehicle identification number: 1. The meaning of the vehicle identification code: The vehicle identification code is the ID number of the car, which is determined according to the national vehicle management standards and contains information such as the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. 2. The composition of the vehicle identification code: The vehicle identification number should consist of three parts: the first part, the World Manufacturer Identifier (WMI); the second part, the Vehicle Descriptor Section (VDS); and the third part, the Vehicle Identifier Section (VIS).

5

4

Share

Which provinces allow motorcycles on highways?

Domestic provinces that allow motorcycles on highways include: Anhui, Heilongjiang, Guizhou, Hubei, Hunan, Jilin, and Liaoning. Although the "Road Traffic Safety Law of the People's Republic of China" does not prohibit motorcycles from using highways, some provinces explicitly ban them, such as Sichuan, Hainan, Fujian, Jiangsu, etc. Motorcycle riding precautions: 1. Helmet: Always wear a helmet when riding a motorcycle. Due to the unique nature of motorcycle riding, wearing a helmet is essential to prevent danger and ensure personal safety. Riders are encouraged to purchase high-quality helmets for guaranteed safety. 2. Lights: Motorcycle lights are also crucial. Before riding, check the lights and use them appropriately during the ride to ensure safety. 3. Tires: Tires play a vital role in ensuring safety during riding. Before riding, check the tire wear condition, regularly maintain tire pressure, and ensure the smoothness of the tire surface. If you notice the tread being punctured by a foreign object during the ride, do not remove it immediately, as doing so may cause faster air leakage. 4. Brakes: Motorcycle brakes determine rider safety. Before each trip, check the brake cables for any abnormalities. A simple method is to squeeze the brakes a few times.

12

5

Share

How to Use Rearview Mirrors When Driving?

Rearview mirrors are tools that allow drivers sitting in the driver's seat to directly obtain external information about the rear, sides, and lower parts of the vehicle. For the convenience of drivers, to prevent traffic safety accidents, and to ensure personal safety, all countries require that vehicles must be equipped with rearview mirrors, and all mirrors must be adjustable. The adjustment methods for rearview mirrors are as follows: 1. Adjustment of the left-side mirror: For the vertical position, place the distant horizon at the center, and for the horizontal position, adjust it so that the car body occupies 1/4 of the mirror's area. 2. Adjustment of the right-side mirror: Since the driver's seat is on the left, it is more difficult for the driver to grasp the situation on the right side of the car. Therefore, when adjusting the vertical position of the right-side mirror, the ground area should be larger, accounting for about 2/3 of the mirror's area, while the horizontal position is similarly adjusted so that the car body occupies 1/4 of the mirror's area. 3. Adjustment of the center mirror: Adjust the horizontal position to the left edge of the mirror, cutting to the right ear of your own image in the mirror. Generally, you cannot see yourself in the center rearview mirror, and for the vertical position, place the distant horizon at the center of the mirror.

8

4

Share

Where is the air conditioning filter of Zotye SR9 located?

What are the reasons for no hot air coming out of the air conditioning heating?

What is the battery model for a Skoda car key?

What is the function of the Anti-Slip Regulation (ASR)?

Where is the Vehicle Identification Number?

Which provinces allow motorcycles on highways?

How to Use Rearview Mirrors When Driving?

How Long Can a Car Sit Without Losing Battery Charge?

What does it mean when a car's VSC system needs to be checked?

Why should low beam headlights be used when driving straight through an intersection at night?

What to Do with 86 Points of Traffic Violations on a Vehicle?