···
Log in / Register

Where is the air conditioning filter of Zotye SR7 located?

1 Answers
SanMelanie
07/28/25 11:59pm
The air conditioning filter of Zotye SR7 is located inside the glove compartment on the passenger side. You can see the filter panel by releasing the side buckle and lowering the glove compartment. Open the glove compartment and pull out the lever on the right side. The Zotye SR7 is positioned as a compact SUV, featuring a unique two-tone interior color scheme that is simple and dynamic, allowing consumers to choose the interior color according to their preferences. All models of Zotye SR7 come with genuine leather upholstery, providing a comfort level that surpasses its peers. In terms of body dimensions, the Zotye SR7 measures 4510mm in length, 1835mm in width, and 1610mm in height, with a wheelbase of 2680mm.
Was this review help?
4
3
Share
More Forum Discussions

What to Do If the Idle Speed Is High After Cleaning the Throttle Body?

If the idle speed is high after cleaning the throttle body, you can seek professional help to adjust the idle speed data using a diagnostic tool, or wait for the car's computer to self-adjust. After cleaning the throttle body, the accumulated impurities that were attached to it are removed, causing the original air intake volume to no longer match the current intake speed, leading to a higher idle speed. The time it takes for the car's computer to self-adjust varies. The throttle body determines the car's air intake volume and affects its acceleration. Properly cleaning the throttle body can help save fuel. During daily driving, if you notice unstable idle speed or insufficient power, consider cleaning the throttle body. Generally, the recommended cleaning interval is every 20,000 to 40,000 kilometers, but the exact timing depends on the driver's habits and usage.
16
1
Share

How often does the three-way catalytic converter need to be cleaned?

The three-way catalytic converter generally needs to be cleaned every 30,000 kilometers of driving. Situations that require cleaning the three-way catalytic converter include: 1. When you notice increased fuel consumption and reduced power in the vehicle; 2. Every time the vehicle undergoes cleaning of the fuel injectors, throttle valve, and intake tract maintenance; 3. Before the vehicle's annual inspection. The three-way catalytic converter is an important external purification device installed in the automobile exhaust system. It converts harmful gases such as carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides (NOx) emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Since this catalytic converter can simultaneously convert the three main harmful substances in exhaust gases into harmless substances, it is called a three-way catalytic converter.
8
4
Share

How to effectively clean the three-way catalytic converter?

The cleaning methods for the three-way catalytic converter: 1. Use oxalic acid solution for cleaning. Remove the three-way catalytic converter, mix the oxalic acid solution with water in a certain proportion, and soak and clean it; 2. Use the drip method. Connect the device output connector to the vacuum tube, start the engine, open the flow control valve, and slowly drip the cleaning agent into the intake tract for cleaning. The three-way catalytic converter is the most important external purification device installed in the automobile exhaust system. It can convert harmful gases such as CO, HC, and NOx emitted by automobile exhaust into harmless carbon dioxide, water, and nitrogen through oxidation-reduction. The use of the three-way catalytic converter will cause carbon deposits in the throttle valve, fuel injector, etc. If not cleaned, the exhaust port will be blocked, resulting in increased exhaust pressure, engine weakness, reduced vehicle power, slow acceleration, and other symptoms.
17
1
Share

What is the cleaning method for a car radiator?

Car radiator cleaning method is: 1. Before cleaning, remove the bumper. Ensure all fixing screws are unscrewed during removal, then slowly detach it from both ends towards the center, being careful not to break any fixing clips; 2. After removing the bumper, the radiator's position will be visible. Adjust the water gun nozzle to a spray pattern and set the pressure to an appropriate level, then rinse the dirty radiator surface; 3. Once rinsing is complete, check if any radiator fins are bent or damaged. If found, use tweezers or bamboo sticks to straighten them. After all checks, reinstall the bumper in the reverse order of removal to complete the radiator cleaning process.
11
5
Share

Is it necessary to clean the car air conditioner?

It is necessary to clean the car air conditioner. After prolonged use of the car's air conditioning system, dust and dirt can accumulate at the air intake, air ducts, fan, and evaporator surfaces, leading to mold growth in the air ducts. Regular cleaning ensures the physical safety of the driver and passengers. Additionally, maintaining a clean car air conditioner also helps with fuel efficiency. The car air conditioner is frequently used during driving, especially during the hot summer months when the cooling function is used more often. During use, dust and bacteria in the air can pass through the air filter of the car air conditioner and enter its interior. If these stains and accumulated dust are not cleaned in time, they can affect the cooling and heat dissipation efficiency of the car air conditioner, thereby increasing the engine's fuel consumption.
12
3
Share

What are the good methods for cleaning a car radiator?

Methods for cleaning a car radiator: 1. Wait for the coolant temperature to drop, open the expansion tank, and add rust remover cleaner to the radiator; 2. Start the engine until the cooling fan operates, then let it idle for 5 to 10 minutes; 3. Turn off the engine and remove the front bumper, being careful not to break the fixing clips; 4. Ensure the coolant has completely cooled, then drain the radiator rust remover cleaner along with the coolant, and finally replace it with new engine coolant. As the main heat dissipation device in the engine cooling system, the car radiator is not only the return channel for the cooling system circulation but also the core component for cooling the coolant and maintaining the engine's normal operating temperature. If the radiator is not cleaned regularly, scale can form on the water side of the engine, preventing effective heat transfer and cooling. This can lead to increased engine temperature, thinning of piston lubricant, loss of lubrication, increased friction, and in severe cases, engine seizure, cylinder sticking, bearing failure, or coolant leakage.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.