Where is the air conditioning filter of Wuling Hongguang S located?

3 Answers
CamilleFitz
07/23/25 12:34pm
Wuling Hongguang S's air conditioning filter is located inside the glove box on the passenger side. Detailed steps to replace the air conditioning filter of Wuling Hongguang S are as follows: 1. Open the glove box on the passenger side and lift it upwards to remove it. 2. Expose the air conditioning filter and remove the plastic strip outside the filter. 3. Pull the white strip to take out the air conditioning filter. 4. After replacing the air conditioning filter, reinstall it in the reverse order of disassembly. Here are the functions of the car air conditioning filter: 1. Block debris: The car air conditioning filter can block impurities such as pollen, dirt, and sand grains that hit the car during driving outside the air conditioning unit, making the air blown out by the air conditioner cleaner. 2. Purify air: The car air conditioning filter can purify harmful gases in the air to a certain extent, improving the air quality inside the car.
Was this review help?
6
0
Share
Lila
08/10/25 10:31am
I've been driving for decades and am very familiar with the Wuling Hongguang S. The cabin air filter is usually located behind the glove compartment on the passenger side. You'll need to open the glove box, press down the clips on both sides to pull it out, and then you'll see a small cover or housing containing the filter. It's quite simple to replace—I do it myself often. Just use a screwdriver to gently loosen the cover, don't force it, and be careful not to damage the plastic parts. The main function of the filter is to trap dust and pollutants, protecting respiratory health, especially during long drives when air quality is crucial. I recommend checking and replacing it every six months, or more frequently in dusty northern areas. The location is easy to find, but beginners might feel a bit nervous—take your time and watch some online diagram videos to get the hang of it.
Was this review help?
13
0
Share
Expand All
MacStephanie
09/22/25 4:06am
As a car owner, I recently replaced the cabin air filter of my Wuling Hongguang S, which is cleverly hidden under the glove compartment on the passenger side. The steps are straightforward: open the glove box, press the spring clips on both sides to release it, then pull out the filter housing and replace it with a new one. The whole process takes just a few minutes, and the filter is inexpensive, costing only a few dozen yuan, saving the high fees charged by 4S shops. After replacement, the air from the AC feels fresher without the previous musty smell. The improvement in driving comfort is noticeable, especially during summer long-distance trips with better ventilation. Remember to choose the correct filter model to avoid purchasing the wrong one, which might not fit or affect filtration efficiency.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

How to activate the automatic handbrake on a Camry?

Mechanical handbrake, located on the left side of the gear lever, is engaged by lifting the handbrake lever and released to allow the vehicle to move. Electronic foot brake, located on the left side of the brake pedal, is engaged by pressing the brake with the left foot to stop the vehicle, and released by pressing and then lifting the foot. Electronic handbrake, located behind the gear lever, is engaged by lifting it with a finger when the vehicle is stationary, and released by pressing the brake pedal and then pressing the electronic handbrake button before starting the vehicle. Alternatively, it can be automatically released by lightly pressing the accelerator while wearing the seatbelt.
19
1
Share

What are the correct driving steps for an automatic transmission car?

The correct driving steps for an automatic transmission car: 1. Turn the ignition key to the second position (power mode) to allow the car's computer system to perform self-check for at least 6 seconds. 2. Press the foot brake and shift the gear from P to N. 3. Release the foot brake and turn the ignition key to start the engine. 4. When starting the car after prolonged parking, it's recommended to warm up the engine for 1-2 minutes while stationary. 5. Press the foot brake and shift the gear from N to D, then release the parking brake (for electronic parking brake, simply press the button briefly). 6. Gradually release the foot brake to start moving. 7. Apply the accelerator smoothly according to road conditions for safe driving.
2
1
Share

What Causes the Abnormal Noise After Installing Snow Tires?

The reasons for abnormal noise after installing snow tires include severely worn brake pads, damaged shock absorbers, deformed wheel hubs, tire wear, or damaged drive shafts. Causes: The vehicle's braking force will decrease when encountering objects like nails or stones. Solutions: Promptly replace the brake pads. If the wear on the left and right drive wheels is uneven, it is generally recommended to first install new tires on the non-driven wheels for some mileage. After the four tires have worn in, perform a cross rotation. For regular use, it is best to perform a cross rotation every 20,000 kilometers, as the driven wheels are dragged along and tend to wear unevenly compared to the drive wheels. Have a repair shop inspect further. Replace the wheel hub if necessary.
1
1
Share

What brand is Qoros?

Qoros is an independent automotive brand, which was founded in China. Qoros Auto is a joint venture company providing automotive products and services, headquartered in Changshu, Jiangsu. The models under the Qoros brand include: Qoros 3, Qoros 7, Qoros 5, Qoros 3 City SUV, and Model Young. Taking the Qoros 3 as an example: it is a compact car with a length, width, and height of 4627mm, 1839mm, and 1445mm respectively, and a wheelbase of 2702mm. In terms of power, the Qoros 3 is equipped with an L4 turbocharged engine, paired with a CVT continuously variable transmission, delivering a maximum power of 115kw and a maximum torque of 230nm.
16
4
Share

How to Playback Recorded Videos on Camry Dash Cam?

Remove the TF memory card from the dash cam, insert it into a card reader, and then connect it to a computer to access the recorded content. Connect the dash cam to a computer using a USB cable, and the computer will recognize the dash cam as a mass storage device. The dash cam is equipped with a display screen. You can playback videos directly on the dash cam. The general method is to first pause the recording, then press the "MODE" button. Locate the recorded video and click "OK" to play it. Press the MODE button to make a selection and click on the recorded video file.
14
3
Share

What causes the airbag warning light to illuminate on the dashboard?

The reasons for the airbag warning light illuminating on the dashboard: 1. Foreign objects around the airbag sensor wiring harness, especially metal debris causing a short circuit, leading to false warnings. 2. The warning light may illuminate due to erroneous data reported by the car's ECU sensor. 3. If the warning light comes on without reason, it is likely caused by the vehicle being parked in a humid environment for a long time or moisture in the wiring connectors during car washing, resulting in a short circuit. 4. A fault in the airbag itself, mostly caused by loose connectors. However, if the USB also fails, the fault in the airbag itself can be largely ruled out.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.