Where is the air conditioning filter of Volkswagen Golf located?

1 Answers
MacAlexandra
07/30/25 2:46am
The air conditioning filter of Volkswagen Golf is located behind the glove compartment on the passenger side and needs to be removed for replacement. The activated carbon dust filter prevents external air pollutants from entering the vehicle. It is essential to replace the dust filter at specified intervals to avoid deterioration of air conditioning performance. If the vehicle is used in environments with severe air pollution, the effectiveness of the dust filter may decrease prematurely, necessitating more frequent replacements between scheduled maintenance cycles. Steps to replace the Volkswagen Golf air conditioning filter: 1. Open the glove compartment on the passenger side. There are independent clips at the circled positions on both sides. Press upwards with both hands slightly to detach the glove compartment. 2. The circled positions are the installation points of the independent clips, now in a released state. 3. Remove the glove compartment to reveal the air conditioning filter cover. The square frame indicates three clips; gently pull downwards to remove the cover. 4. After removing the cover, the air conditioning filter core is visible. Replace it, ensuring the arrow on the filter core faces the correct direction during installation, then reassemble everything in reverse order. The Golf 7, as a leader in Volkswagen's design, consistently represents the brand's new design language, with body dimensions of 4255mm in length, 1799mm in width, and 1452mm in height.
Was this review help?
16
0
Share
More Forum Discussions

How many liters does the Tharu's fuel tank hold when full?

Volkswagen Tharu has different fuel tank capacities depending on the car version, which are 50 liters, 51 liters, and 56.5 liters. All Volkswagen Tharu models are suitable for adding No. 95 gasoline or higher. After opening the fuel tank cap, you can refuel. More relevant information is as follows: 1. The fuel tank has a sufficiently large volume to hold gasoline. In addition to storing gasoline, it can also dissipate heat, separate bubbles in the oil, and precipitate gasoline impurities. 2. The car's fuel tank generally uses an open-type fuel tank, which requires regular thorough cleaning. Regular maintenance of the fuel tank can better extend its service life and ensure the cleanliness of the car's oil. 3. The car's fuel tank is used to store the gasoline that powers the car and is one of the very important tools of the car. When refueling, do not fill it to the brim, as this may affect the condition of the car's engine.
1
1
Share

How to Deal with the Continuously Illuminated Tire Pressure Monitoring Light on Lavida?

Turn on the ignition switch, press and hold the SET button of the tire inflation pressure control system until the dashboard indicator light comes on. Wait for the system to confirm the storage of new parameters, and the tire pressure monitoring light will automatically turn off, completing the reset. Below are the specific methods to eliminate the tire pressure monitoring light: 1. First, turn off the engine, then turn on the power for vehicle self-inspection. Press and hold the tire pressure monitoring button on the right front side of the gear shift lever for about three seconds until you hear a "ding" sound. Release the button to eliminate the tire pressure warning light on the dashboard. 2. If the light cannot be eliminated, visit a Volkswagen after-sales service center. Have the staff check the tire pressure and related systems such as sensors. After confirming there are no faults, use a specialized decoder to clear the tire pressure warning light on the vehicle.
18
2
Share

What does the engine fault light EDC mean?

EDC fault light indicates that there is a problem with the engine electronic control system, reminding the owner to go to the repair shop for inspection and maintenance as soon as possible. Here is some information about EDC: 1. The full name of EDC is Electric-Diesel-Control, which means electronic control system for diesel injection; its task is to electronically control the fuel injection system to achieve real-time control of fuel injection quantity and timing according to operating conditions. 2. When EDC appears on the car dashboard, it indicates an engine fault. When the EDC fault light comes on, it means there is a problem with the engine.
7
0
Share

What is the principle of car tire pressure monitoring?

Car tire pressure monitoring principle depends on the type of monitoring device, specifically introduced as follows: 1. Direct tire pressure monitoring: Uses pressure sensors installed inside the tires to measure air pressure, and wireless transmitters to send pressure information from inside the tire to a central receiver module. 2. Indirect tire pressure monitoring: When tire pressure decreases, the vehicle's weight causes that wheel's rolling radius to become smaller. By comparing rotational speed differences between tires, it achieves the purpose of monitoring tire pressure. 3. Functions of tire pressure monitoring: Prevent accidents; Extend tire service life.
9
1
Share

What to Do When the Car Key Won't Come Out?

When a car key won't come out, it's not necessarily a malfunction. There are two common scenarios: first, the key won't come out after turning off the engine; second, the key can't be turned after insertion. Here are the details: 1. Key won't come out after turning off the engine (common in automatic transmission models): In this case, the owner should check if there's any obstruction in the gear slot. Remove the obstruction, start the car, shift the gear again to ensure it's fully back in place, and then the key can be pulled out. 2. Key can't be turned after insertion: This is actually the car's automatic steering wheel lock function, a simple anti-theft feature. To resolve this, turn the key forcefully with your right hand while gently shaking the steering wheel left and right with your left hand, and the key will turn.
1
3
Share

What are the effects of overfilling engine oil?

The effects of overfilling engine oil are: 1. Intense agitation between engine components, leading to excessive engine load and power loss; 2. Oil splashing onto cylinder walls and entering the intake system through the crankcase ventilation system, causing oil burning issues. The method for changing engine oil is: 1. Lift the vehicle with a jack, locate and loosen the drain plug to drain the oil; 2. Remove the oil filter and place a container beneath it; 3. Install a new oil filter and add fresh oil. The functions of engine oil are: 1. Reduce friction and high temperatures; 2. Cool down the engine; 3. Clean and remove contaminants; 4. Dampen vibrations; 5. Prevent rust and corrosion.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.