Where is the air conditioning filter of Volkswagen Bora located?

1 Answers
LaCorey
07/29/25 8:13pm
Volkswagen Bora's air conditioning filter is located inside the glove compartment on the passenger side. Open the engine hood, remove the four screws on the cover panel, and lift the panel to see the air conditioning filter of the Volkswagen Bora. Below are some related details: 1. The Volkswagen Bora is the first independently designed model by FAW-Volkswagen, hailed as a new car that "inherits and surpasses the classics." The Bora is a best-selling family sedan under FAW-Volkswagen. To cater to a younger consumer base, the Bora must undergo a meaningful facelift to maintain its position in the market. 2. The frequency of replacing the car's air conditioning filter depends on usage. Generally, for urban family cars, it should be replaced every six months or once a year. The frequency of air conditioning use in different seasons can also have an impact.
Was this review help?
7
1
Share
More Forum Discussions

What Toyota model is gtm7181lhevjm?

Toyota brand hybrid sedan. Here is the relevant content: 1. GAC Toyota: GAC Toyota Motor Co., Ltd., established on September 1, 2004, is a joint venture with 50% investment each from Guangzhou Automobile Group Co., Ltd. and Japan's Toyota Motor Corporation, with a cooperation period of 30 years. The company is located in Nansha District, Guangzhou, the geometric center of China's dynamic Pearl River Delta, covering an area of 1.87 million square meters with a building area of 400,000 square meters and an initial annual production capacity of 200,000 vehicles. Currently, it has more than 5,500 employees, of which 24.9% have college degrees or above, with an average age of 26. 2. Hybrid vehicle: Refers to a vehicle whose drive system consists of two or more individual drive systems that can operate simultaneously, with the vehicle's driving power provided by a single drive system alone or jointly based on the actual driving state of the vehicle.
13
4
Share

Is the Green Book Required for Vehicle File Transfer?

Is the Green Book required for vehicle file transfer? The Green Book is required for vehicle file transfer. Reasons why the Green Book is required: The Motor Vehicle Registration Certificate is a mandatory document, and while a photocopy is acceptable, the original must be presented for verification. The Green Book generally refers to the Vehicle Registration Certificate, but this certificate is not a legal proof of vehicle ownership; rather, it serves as an administrative permit allowing the vehicle to be driven on the road. Process for vehicle file transfer: First, submit an application at the local Vehicle Management Office, specifying whether the vehicle is being transferred locally or relocated. Then, complete procedures such as chassis number tracing, photography, and vehicle inspection at the transfer hall. Submit the required documents. Three working days after surrendering the license plates, collect the main file from the original Vehicle Management Office where the procedures were processed. The file includes the application form, inspection sheet, chassis number, and driving license. After the vehicle passes inspection, the Vehicle Management Office will confiscate the original license plates and driving license.
17
0
Share

How to Cancel Mercedes-Benz Maintenance Reminder?

Turn the key to position 1, press the return arrow on the right side of the steering wheel, and the instrument panel will display the mileage interface. Simultaneously hold down the OK button and the phone button in the middle of the steering wheel until the workshop menu appears showing voltage. Use the up and down arrow keys to switch to the maintenance line, and select the appropriate option according to the prompts using the arrow keys. Confirm with OK until the maintenance reset prompt appears.
12
4
Share

Should an automatic transmission car be started in P or N gear?

For automatic transmission cars, the engine can be started in either P (Park) or N (Neutral) gear. For safety reasons, modern vehicles require two conditions to be met during startup: first, the brake pedal must be depressed to start the engine, and second, the P or N gear startup principle must be followed. Therefore, if the brake is not pressed, the car will not start even when in P or N gear. Here are some relevant details about car gears: 1. When making a short stop without turning off the engine, you can shift to N gear. When parking and turning off the engine, you should shift to P gear. 2. While driving, avoid coasting in N gear, as this can affect the cooling and lubrication of the automatic transmission. 3. Before shifting to P gear, ensure the car has come to a complete stop to avoid damaging the transmission. At a red light, if the car has an autohold function, you can leave it in D (Drive) gear without any action. If the car lacks autohold, you can shift to N gear, but it is not recommended to shift to P gear while waiting at a red light.
13
3
Share

Why Should Motorcycles Not Be Exposed to Direct Sunlight?

Motorcycles should not be exposed to direct sunlight as it can lead to tire blowouts. Accelerated gasoline evaporation: All vehicles are susceptible to damage from sun exposure, and some are particularly vulnerable. Exposing a motorcycle to direct sunlight accelerates gasoline evaporation. Gasoline is inherently highly volatile, and fuel tank caps are designed with ventilation to allow for pressure equalization. Sunlight exposure effectively heats the gasoline, causing it to evaporate even faster. Additionally, prolonged sun exposure accelerates the aging of metal and other materials used in the motorcycle. Maintenance tips: If the temperature gauge needle points to the high-temperature zone while riding, immediately stop to "cool down" the motorcycle. Choose a shaded, well-ventilated area to open the engine cover for heat dissipation. If there is a "boiling" phenomenon in the radiator, do not turn off the engine or add water immediately.
4
3
Share

What are the reasons for oil leakage in the transmission case of the Jog-I?

The reasons for oil leakage in the transmission case of the Jog-I include issues with the oil seal and damage to the case body. Issues with the oil seal: Aging or deformation of the oil seal, detachment of the oil seal spring, or incorrect installation direction of the oil seal can all cause the oil seal to lose its oil-blocking function. Replace any aged or deformed oil seals, and pay attention to the installation direction of the oil seal—the side with the spring ring should face the side with oil. Damage to the case body: If there is damage to the joint surface of the case body, appropriately thicken the paper gasket at the damaged area. If oil leakage persists, welding repair should be performed. If the sealing paper gasket is damaged, replace it with an identical one. If the screws on the case cover are loose, tighten them promptly.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.