Where is the air conditioning filter of the Qashqai located?

Where is the rearview mirror heating button located on the Lynk & Co 03?

The rearview mirror heating button on the Lynk & Co 03 is located below the vehicle's central control screen, within the air conditioning control area. It is the last button among the four buttons in the air conditioning control panel, featuring a rectangle icon with three curved lines and arrows extending from the bottom to the top. The function can be used when the vehicle is powered on, and activating it simultaneously turns on the rear windshield heating. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button, where rotating the knob activates the heating. The other is located on the air conditioning control panel, where pressing the heating button turns it on. No manual angle adjustment is needed, as the driver's side has adjustment buttons. Principle of the rearview mirror heating function: After rotating the knob, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat is then distributed across the left and right rearview mirrors. Simultaneously, due to the rising temperature and evaporation, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively heating the mirror and removing frost. However, in heavy rain, its effectiveness may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. When using this function, ensure the vehicle is running. Avoid activating rearview mirror heating while the car is stationary to prevent draining the battery, which could lead to insufficient power for starting the vehicle. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Slightly opening both side windows creates airflow between the interior and exterior, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also help, as blowing warm air from the AC aids in defogging.

10

4

Share

Can I Get Free Repair at the 4S Shop for Faulty Power Windows in a New Car?

If the issue stems from the vehicle itself and not due to human damage, it can indeed be repaired for free at the 4S shop. Labor cost calculation standards at 4S shops: The labor hours (duration) are typically predetermined by the manufacturer. For instance, a routine maintenance service might be allocated 2 labor hours, etc. The labor hour rate is generally set by the 4S shop based on local conditions, taking into account two main factors: the local wage level and the labor hour rates of other brand 4S shops in the same city. Power window system: An electric window system consists of the window glass, window regulator, motor, relay, switches, and other components. Typically, electric window systems are equipped with two sets of control switches. One set is installed on the dashboard or the driver's side door armrest, serving as the master switch, which allows the driver to control the movement of each window. The other set is installed on each passenger door, functioning as individual switches that can be operated by passengers. Usually, the master switch also includes a circuit breaker switch; if this is turned off, the individual switches will not function.

7

4

Share

What Items Are Checked During a Vehicle Inspection?

The following items are checked during a vehicle inspection: 1. Inspect the body paint: Check for scratches, spots, dents, and wear on the paint. Observe under sufficient sunlight to see if there is any color difference in the paint. Open the doors and push/pull them from various angles to let light shine from different directions, checking if the sheet metal is smooth and whether there are any signs of repair. 2. Check the vehicle identification plate: The vehicle identification plate is located on the side of the driver's door or inside the engine compartment. Check if the manufacturing date is too far in the past. If it's more than six months old, the vehicle might be a stock car or a test drive car. Also, ensure the information on the vehicle identification plate matches that on the vehicle certification. 3. Check the windshield: The numbers represent the most recent production year, and the dots represent the production month. If the dots are on the left side of the number, it indicates production in the first half of the year—subtract the number of black dots from 7 to get the specific month. If the dots are on the right side of the number, it indicates production in the second half of the year—subtract the number of black dots from 13 to get the specific month. If the windshield production date is too far from the vehicle's manufacturing date (a year or more), the windshield has likely been replaced. 4. Check if the engine compartment is clean: If the vehicle has been stored for a long time or used, some areas may have obvious dust or stains. Also, check if the engine oil is sufficient and whether the levels of other fluids are within the acceptable range. 5. Check if the doors open and close smoothly: The door hinges should rotate without noise, the gaps between the doors and the front/rear bumpers should be consistent, and the doors should close properly in one motion. 6. Check the tire production date: If the tire production date is significantly older than the vehicle pickup date, consider replacement. 7. Check basic vehicle functions: Ensure the windows roll up and down properly, the air conditioning cools, the air vents have no strange odors, the dashboard functions operate correctly, the wipers work, the lights turn on properly, and the sunroof opens and closes smoothly, among other things.

2

0

Share

Should You Use Cold or Warm Air to Defog a Car?

Both warm air and cold air can be used to defog a car. The differences between the two methods: Using warm air to blow on the windshield is more effective than cold air because it essentially dries out the water vapor, preventing the issue of fogging up again. However, warm air defogging is slower than cold air, and the fog may initially worsen when first turned on, requiring a few minutes of patience. If you need to quickly remove fog from the windshield, cold air is the better choice. Cold air defogging: Turn on the air conditioning's cold air, press the A/C button, adjust the vents to blow toward the windshield, and set the fan speed to maximum. This reduces the temperature difference between the inside and outside of the windshield, making it harder for fog to form and effectively eliminating it. However, this method is best suited for emergency quick defogging, as the cold air can make the driver feel chilly. Warm air defogging: In winter, using warm air for defogging is more comfortable. Although warm air takes longer to defog than cold air, it prevents the windshield from fogging up again. When the driver turns on warm air for defogging, the fog on the windshield may initially increase—don't panic. After a short wait, the warm air will dry out the fog.

13

1

Share

Is a fuel consumption of 5.5L/100km considered fuel-efficient?

Different vehicle models inherently have varying fuel consumption levels, so whether 5.5L/100km is fuel-efficient cannot be generalized—it depends on the specific vehicle type. Automotive fuel consumption calculation method: Fuel consumption per 100km = Volume of fuel consumed (liters) ÷ Distance traveled on that fuel (kilometers) × 100. For example, if a vehicle consumes A liters of fuel while traveling N kilometers, then its fuel consumption per 100km = A ÷ N × 100. Factors contributing to increased fuel consumption include: 1. Low tire pressure or severe tread wear: Increased contact area between tires and road surface raises friction and rolling resistance, naturally increasing fuel consumption. While overinflated tires may slightly improve fuel efficiency, they compromise ride comfort and increase blowout risks. 2. Driving habits: Smooth acceleration with linear throttle input promotes fuel efficiency, whereas aggressive driving behaviors like sudden acceleration, frequent braking, repeated engine starts, and unnecessary revving waste fuel. Since mechanical systems cannot respond instantly, such practices increase fuel usage. 3. Fuel quality: Higher-quality gasoline enables more complete combustion, reducing consumption. Conversely, gasoline with impurities increases fuel waste. 4. Substandard engine oil: Poor-quality or overfilled engine oil may enter combustion chambers, hindering complete fuel combustion and increasing consumption. Insufficient lubrication also forces the engine to work harder, requiring more fuel for equivalent performance.

4

2

Share

Is 190kpa Tire Pressure Normal?

Tire pressure of 190kpa is not safe for driving. According to the international GBT2978-2008 standard requirements, the normal pressure for standard tires is 240-250kpa; reinforced tires require 280-390kpa; the maximum pressure should not exceed 350kpa. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and potential deviation, compromising driving safety; Increases movement in various parts of the tire, causing abnormal heating due to excessive rolling; Reduces the functionality of cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim causing damage to the bead area and abnormal wear; Multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a blowout; Increases tire body deformation, making the tire side prone to cracks, and generates flexing movements, leading to excessive heat, rubber aging, fatigue in the cord layer, cord breakage, and also increases the tire's contact area with the ground, accelerating shoulder wear. Solutions for insufficient tire pressure: If no damage is visible, simply inflate to normal pressure and reset the tire pressure system; If a puncture is found during inspection, drive to a tire shop promptly for repair, then reinflate; If the tire pressure warning reappears after inflation without any puncture, it might be due to air leakage caused by rim deformation. It is advisable to check the rim and consider replacement.

17

3

Share

Where is the air conditioning filter of the Qashqai located?

Where is the rearview mirror heating button located on the Lynk & Co 03?

Can I Get Free Repair at the 4S Shop for Faulty Power Windows in a New Car?

What Items Are Checked During a Vehicle Inspection?

Should You Use Cold or Warm Air to Defog a Car?

Is a fuel consumption of 5.5L/100km considered fuel-efficient?

Is 190kpa Tire Pressure Normal?

Is Wheel Rim Out-of-Round Repair Durable?

What is the fuel consumption per 100 kilometers for the CFMOTO 800MT?

Does Installing ETC in the Black Dot Area Affect Its Usage?

The Function of Car Floor Mats?