Where is the air conditioning filter of the new Wuling Guang located?

2 Answers
DelaneyMarie
07/30/25 12:55am
The air conditioning filter of the new Wuling Guang is located inside the glove box. To replace it, there is a black plastic panel above the passenger footwell with two retractable clips. Remove the panel by pulling the clips, then disconnect the negative terminal of the battery. Next, remove the body control unit and its mounting bracket. After that, remove the panel on the left side of the passenger footwell, which is secured by four screws, and proceed with the installation. The dimensions of the new Wuling Guang are 3797mm in length, 1510mm in width, and 1835mm in height, with a wheelbase of 2500mm. The new Wuling Guang features a mid-engine, rear-wheel-drive layout, with a MacPherson strut independent front suspension and a leaf spring non-independent rear suspension.
Was this review help?
12
0
Share
DeCora
08/15/25 6:22am
The air filter for the Wuling Rongguang is usually hidden behind the glove compartment on the passenger side, based on my experience of searching for it several times in the car. You need to open the glove box first, then look for a small opening on the inner wall or the back of the box. Sometimes it's secured with clips, and you can gently pry it open to reveal the filter housing. Changing the filter is actually quite simple, but avoid disassembling parts randomly to prevent damage. The reason the filter is hidden in this location might be because it's conveniently positioned to allow air to enter from below the windshield, directly filtering out dust. I recommend checking it every year or so, as a clogged filter can cause unpleasant odors when the AC is on, affecting health—especially noticeable during summer when the AC is used more frequently. Remember to choose genuine replacement filters to avoid size mismatches. Pay attention to reduced airflow from the AC while driving, as this could indicate it's time to check the filter. Doing it yourself can save some money, but if you're unsure, it's better to seek professional help.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

What to Do When the Volkswagen Trunk Won't Open?

Use a key or other sharp object to pry open the outer shell, revealing the trunk's locking mechanism, then gently pull it. If the Volkswagen trunk won't open, it could be due to a dead remote key battery or poor signal. Simply replace the battery or use the key to open the trunk. Sometimes, pressing the central trunk unlock button will cause the trunk to pop open.
17
0
Share

How to Activate One-Touch Window Control in Lamando?

Press the button to the first detent position (excessive force will reach the second detent), then release when the window reaches the desired position. Alternatively, press to the second detent position to automatically lower the window completely. Pull the button to the first detent position (excessive force will reach the second detent), then release when the window reaches the desired position. Briefly pull the switch to the second detent to automatically close the window.
6
2
Share

How to Turn Off the Interior Light in an Audi That Stays On?

If the overhead interior light stays on, switch the overhead light control to OFF, and the light will turn off. It might also be that the switch is set to DOOR mode; opening and then closing the door again can turn the light off. If the light remains on even when the switch is in the OFF position, it could be that the switch isn't fully engaged. Try moving the switch to ON and then back to OFF.
14
4
Share

How to switch the dashboard display from English to Chinese?

First, press the start button to ignite the car engine, otherwise adjustments cannot be made. Then, click the "+" key on the volume button three times. Press the settings button on the left side of the multifunction steering wheel to enter the dashboard settings function. Select Chinese in the displayed English-Chinese switch interface on the dashboard. Finally, click the OK button on the right side of the multifunction steering wheel to complete the English-Chinese switch.
7
1
Share

How to Remove the Center Armrest of Magotan B7?

Lift up the fabric cover inside. Use a 10# tool to remove the two 10# screws and store the fixing screws properly. Then firmly pull the gear lever handle upwards to release it from the fixing clip. The central gear shift panel is surrounded by clips, simply pull upwards sequentially to release them. Finally, there is a connector underneath the panel, unplug it to remove the armrest completely.
15
5
Share

How to Tell if the Front Film is Metallic?

Use two glass cups and pour disinfectant into both. Cut a small corner of the film that contains certain metal components and soak it; fake metallic films will start to develop white edges around the perimeter. Use two glass cups and pour disinfectant into both. Cut a small corner of the film that contains certain metal components and soak it; fake metallic films will start to develop white edges around the perimeter.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.