Where is the air conditioning filter of the new Peugeot 308 located?

2 Answers
JocelynMarie
07/30/25 2:03am
The air conditioning filter of the new Peugeot 308 is located near the left leg area of the front passenger seat. There is a small cover that needs to be removed, after which you can open the plastic interior panel to access it. The function of the air conditioning filter is to purify the air entering the cabin from outside, improving air quality and providing a healthy environment for passengers. The new Peugeot 308 is a compact sedan produced by Dongfeng Peugeot. Its dimensions are 4590mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2675mm. The vehicle features a large-mouth style grille, giving it a more aggressive look compared to the previous model. It comes with LED daytime running lights integrated into the headlights, along with smooth and sharp body lines that enhance its sporty appeal.
Was this review help?
10
1
Share
DelKaleb
08/15/25 8:01am
I've driven this car for several years, including the new 308. Its cabin air filter location is thoughtfully designed, right behind the glove compartment on the passenger side. Open the glove box, and you'll find clips or screws securing it; gently press down or unscrew them to remove the entire compartment. Then you'll see a rectangular slot where the filter is inserted. The location isn't hard to find, but if it's your first time, you might need a few tries—don't rush. Regular replacement is crucial; I recommend changing to a new filter every 15,000 kilometers. This effectively filters out dust, pollen, and other particles, keeping the air inside clean. Using high-quality branded filters makes a noticeable difference—the air from the AC feels much fresher, improving your mood while driving, especially in dusty urban areas. Doing it yourself saves money, just be careful not to damage any plastic parts.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What is the disassembly and assembly sequence of engine cylinder head bolts?

Engine cylinder head bolt disassembly and assembly sequence: The disassembly sequence of cylinder head bolts is to remove them in a cross-symmetrical order from both sides to the center of the cylinder head in two to three steps; The installation sequence of cylinder head bolts is to tighten them in a cross pattern from the center to both sides in three to four steps according to the specified torque. The function of the cylinder head is to seal the cylinder, form the combustion chamber together with the piston, and withstand the effects of high-temperature and high-pressure gas. The cylinder head bears the mechanical load caused by gas force and the tightening of cylinder bolts, as well as high thermal load due to contact with high-temperature gas. To ensure good sealing of the cylinder, the cylinder head must neither be damaged nor deformed, so it should have sufficient strength and stiffness.
12
0
Share

What to Do About Timing Chain Noise?

Solutions for timing chain noise include: 1. Replace the tensioner; 2. Replace the chain; 3. Replace the chain guide; 4. Check if the lubrication system is faulty; 5. If the noise is caused by low oil pressure, the noise will be louder at idle and reduce when accelerating. The method for replacing the timing chain is: 1. Remove the valve cover, detach the crankshaft pulley, and take off the timing chain cover; 2. Rotate the crankshaft to the top dead center of the first cylinder, then tighten the crankshaft fixing screw to secure it; 3. Rotate the intake and exhaust camshafts—there are grooves at the rear of the camshafts—align the grooves of both camshafts evenly, and insert the specialized tool; 4. Remove the old chain and install the new one.
3
4
Share

How are license plate screws installed?

First, drill a hole in the protective cap with a drill, then use a screwdriver to install the screw. Alternatively, use an angle grinder to remove the protective cap, and then install the screw with a screwdriver. Here are specific details about license plates: 1. Meaning: A license plate, commonly known as a vehicle plate, refers to the number plates attached to the front and rear of a vehicle. They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, and other relevant information. License plates serve to identify and register vehicles, allowing authorities to determine the vehicle's region of registration and access the owner's details and registration information. 2. Temporary license plates: Temporary license plates are issued by vehicle management authorities when a vehicle is undergoing registration procedures and has not yet been officially registered. These temporary plates have a limited validity period and are restricted to specific regions.
1
4
Share

How Many Models Does Mercedes-Benz Have?

Mercedes-Benz offers a wide range of models, including sedans, SUVs, sports cars, MPVs, and light commercial vehicles. Below is an introduction to Mercedes-Benz models: Mercedes-Benz Models and Classes: The A-Class is a compact hatchback, the C-Class is a compact sedan, the E-Class is a mid-size sedan, the S-Class is a luxury sedan, the M-Class is an SUV, the G-Class is an off-road vehicle, the V-Class is a multi-purpose van, the SLK is a compact sports car, the CLK is a mid-size sports car, the SL is a luxury sports car, the CL is a luxury coupe, and the SLR is a supercar. Introduction to Mercedes-Benz: Mercedes-Benz is a German automotive brand, with the "three-pointed star" as its logo, symbolizing the mechanization and integration of land, water, and air.
9
3
Share

What brand of transmission does the Boyue use?

The Boyue uses a self-developed transmission. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixed or stepped changes in the transmission ratio between the output and input shafts. The Boyue is a compact 5-door, 5-seat SUV with body dimensions of 4519mm in length, 1831mm in width, 1694mm in height, and a wheelbase of 2670mm. It is equipped with a 1.8T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 120 kilowatts and a maximum torque of 250 Newton-meters. The drive system is front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension employing a multi-link independent suspension.
13
0
Share

Where is the emergency trunk release switch for the Elysee?

The Elysee does not have an emergency trunk release switch. The method to open the trunk from inside the car for the Elysee is: the switch is located above the CD slot on the center console panel. Press the button, and the trunk will open automatically. Taking the Elysee 2018 1.6L Manual Fashion model as an example, the car's length, width, and height are 4427mm, 1748mm, and 1476mm respectively, with a wheelbase of 2652mm. The car is equipped with a 1.6L naturally aspirated engine, with a maximum power of 86kw and a maximum torque of 150nm, paired with a 5-speed manual transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is torsion beam non-independent suspension. The body structure is a monocoque, the drive type is front-engine front-wheel drive, and the power steering type is electric power steering.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.