Where is the air conditioning filter of the Haima S5 located?

1 Answers
McCharlotte
07/29/25 9:59pm
The air conditioning filter of the Haima S5 is located inside the central partition on the right side of the accelerator pedal. The air conditioning filter is usually installed in the engine compartment of the car, and its main function is to block debris, preventing pollen, dust, and other small particles from entering the car's air conditioning system, which could cause it to malfunction. The air conditioning filter also has the function of purifying the air, reducing the entry of harmful gases such as ozone and carbon monoxide into the car, thereby improving the air quality inside the car to a certain extent. The Haima S5 is a compact SUV with a length of 4195 mm, a width of 1765 mm, a height of 1637 mm, and a wheelbase of 2560 mm. In terms of power, this car is equipped with a 1.6-liter naturally aspirated engine across all models.
Was this review help?
14
3
Share
More Forum Discussions

Where is the USB port located in the Mercedes-Benz E300L?

Mercedes-Benz E300L USB port is located in the center console area, and a conversion adapter is required for USB flash drive insertion. Below is relevant information about the Mercedes-Benz E300L: 1. Positioning of E300L: The E300L is a model exclusively designed for the Chinese market, with its extended wheelbase specifically catering to domestic users' needs. Its domestic production offers more competitive pricing compared to the imported version. 2. Wheelbase: The new generation Mercedes-Benz E-Class features a 14cm longer wheelbase. Overseas models with 4868mm body length have 2874mm wheelbase (already 20mm longer than previous generation). After 14cm extension, the wheelbase will reach 3014mm.
15
2
Share

Should the Volkswagen Tacqua use 92 or 95 octane gasoline?

According to the official vehicle manual recommendations, most models of the Tacqua should use 92 octane gasoline, while the Tacqua-2021-280TSI-DSG-Yue Pro Smart Connect Edition and R-Line Smart Connect Edition should use 95 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, the Tacqua's fuel tank cap also indicates the recommended octane rating. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the gasoline grade, as high-compression engines can also be tuned to use lower-octane fuel. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Tacqua occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, using higher-octane fuel will not cause damage, but the increased octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher-octane gasoline, using lower-octane fuel can cause engine knocking. The significantly lower octane number reduces the gasoline's ignition point, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance occurs during the upward stroke. This resistance makes the engine run very unstably. Mild knocking only increases noise without obvious engine damage, but severe knocking indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
18
3
Share

How to Transfer an Out-of-Town Driver's License to Local?

You can directly go to the vehicle management office in your registered residence to complete the transfer procedures. 1. Required documents: Bring your ID card, driver's license, and photos to the vehicle management office of the municipal public traffic police detachment (you may need to submit a medical examination form from a county-level or above hospital, but you can usually get the medical examination done at the vehicle management office, as most hospitals have a medical examination station nearby). 2. Form filling: Fill out the "Motor Vehicle Driver's License Application Form," and submit your ID card, original driver's license, and copies to the window officer for review. Once approved, a new license will be issued, though in some places, you might need to return after ten days to collect it. The process is almost the same in every city. 3. Fees: Transfer fees are generally not charged, but if there are any, you just need to pay the corresponding amount.
3
4
Share

How to Inspect a Driver's License?

Driver's license inspection procedures are as follows: 1. Within 90 days before the expiration of the driver's license: The holder of the driver's license should apply for a replacement of the motor vehicle driver's license and undergo inspection within 90 days before the expiration of the current license. 2. Requirements: The applicant's points in the current scoring period have not reached 12 points; the applicant has no pending road traffic safety violations; the applicant's physical condition meets the driving license requirements; the motor vehicle driver's license is not detained, suspended, revoked, canceled, or withdrawn by law. 3. Required materials: For the annual inspection, the applicant needs to fill out the "Motor Vehicle Driver's License Application Form" as required, provide the original motor vehicle driver's license, and 3 photos of the motor vehicle driver. It is also necessary to provide the original "Motor Vehicle Driver's Physical Condition Certificate" issued by a county-level or higher medical institution designated by the health bureau or a regiment-level or higher medical institution designated by the military or armed police forces. The inspection requires the original and a copy of the applicant's identity proof; if represented by an agent, the original and a copy of the agent's identity proof must also be submitted. 4. Fees: A processing fee for the motor vehicle driver's license will be charged during the inspection, usually 10 yuan.
12
5
Share

Can a C1 Driver's License Be Used to Drive a Motorcycle?

Having a C1 driver's license does not permit you to drive a motorcycle, as motorcycles require their own specific license, namely the D, E, or F license. Additionally, the scope of a C1 license is limited to cars, and motorcycles are not included in this category. Therefore, to legally drive a motorcycle, a C1 license holder must obtain an additional motorcycle endorsement. Driving a motorcycle with a C1 license is considered operating a vehicle that does not match the license's permitted vehicle type, which is legally equivalent to driving without a license. According to the Road Traffic Safety Law, this offense can result in a 12-point deduction from the driver's license, a fine ranging from 200 to 2,000 yuan, and detention for up to 15 days. As per the Regulations on the Application and Use of Motor Vehicle Driving Licenses, the conditions for adding a motorcycle endorsement to an existing driver's license are as follows: The probationary period of the driver's license must have been completed; There must be no record of full-point violations in the current and the previous scoring cycles. Physical conditions: Age: Applicants must be between 18 and 60 years old, with the upper age limit extended to 70 for light motorcycles; Vision: Uncorrected or corrected visual acuity must reach at least 4.9 on the logarithmic visual acuity chart; As for height, upper limbs, lower limbs, neck, and torso, the standards are largely similar to those for a C1 license, and in some cases, even simpler. As long as there are no significant health issues and the applicant can pass the C1 license medical examination, they should have no problem passing the motorcycle license medical examination.
1
0
Share

How to Retake Subject 1 If the Driver's License Has Expired for One Year?

If the driver's license has expired for more than one year but less than two years, the license will be revoked and locked. You need to go to the vehicle management office to retake the Subject 1 exam. If you pass the exam, the revoked status of the license will be unlocked, and you can then proceed to replace it with a new one. If you fail the Subject 1 exam, you can continue to register for the exam until you pass it before applying for a replacement. Below are the relevant details: 1. Validity period of the driver's license: (1) If the license has expired for less than one year, you can follow the normal replacement process. However, it is important to note that you must not drive a motor vehicle after the license has expired. (2) If the license has expired for more than one year but less than three years, you need to go to the vehicle management office to retake the Subject 1 exam. Only after passing the exam can you apply for a replacement. (3) If the license has expired for more than three years, it will be permanently invalidated and cannot be restored. You will need to retake the driver's license exam from scratch. 2. Process for replacing the driver's license: You can apply to the vehicle management office up to 90 days before the expiration date of the license. Prepare the required materials and follow the replacement process at the vehicle management office to obtain a new driver's license.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.