Where is the air conditioning filter of the 2006 Fit located?

1 Answers
IslaLynn
07/29/25 10:01pm
The air conditioning filter of the 2006 Fit is located inside the blower behind the glove box on the passenger side. When the air conditioning is operating, external air enters the vehicle to participate in the air circulation, and it is necessary to filter out impurities such as dust, pollen, soot, and particles from the air. It is recommended to replace the air conditioning filter every 10,000 kilometers or annually. If the vehicle is frequently driven in areas with severe air pollution, it is advisable to shorten the usage and replacement interval of the air conditioning filter. The Fit is a hatchback introduced by GAC Honda, with dimensions of 4065mm in length, 1695mm in width, and 1525mm in height, and a wheelbase of 2530mm. The Fit features a new geometric front MacPherson strut independent suspension and a high-rigidity rear torsion beam semi-independent suspension, both equipped with stabilizer bars, delivering excellent response performance and handling stability.
Was this review help?
10
0
Share
More Forum Discussions

What is the tire model of Changan CS75?

There are three specifications of tires for the Changan CS75, which are 225/65R17, 225/60R18, and 225/55R19. Below is a detailed introduction to car tires: 1. Tires are important components of a car. There are more than 10 types of markings on car tires. Correctly identifying these markings is crucial for the selection, use, and maintenance of tires, and is of great significance for ensuring driving safety and extending the service life of tires. 2. Tires are usually mounted on metal rims, supporting the body, cushioning external impacts, achieving contact with the road surface, and ensuring the driving performance of the vehicle. 3. When purchasing new tires, ensure that the size, load range, speed rating, and construction type of the new tires are the same as those of the original tires.
10
2
Share

How many hours are required for Subject 3 check-in?

Different types of driver's licenses require varying hours for Subject 3 check-in. The commonly tested C1, C2, and C5 licenses require 24 hours of check-in; A1 and B1 require 20 hours; A2 requires 22 hours; A3 requires 33 hours; and B2 requires 32 hours. In addition to completing the required check-in hours, a certain mileage must also be practiced for Subject 3. Below are the rules for Subject 3 check-in: 1. For check-in hours, trainees generally need to input their fingerprints during practice, and the instructor must swipe their card to prevent cheating by substitution. Some regions have started implementing facial recognition for check-in, which is more convenient. 2. Each check-in hour is 60 minutes, with effective teaching time not less than 45 minutes. Each trainee's daily classroom learning time and practical operation learning time must not exceed 4 hours.
3
0
Share

Can first gear be used in Subject 3 except for gear shifting?

First gear can be used in Subject 3 except for gear shifting. Below are the specific details about Subject 3: Overview: Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. Test Content: The road driving skills test for Subject 3 includes preparation before starting, simulated lighting test, starting, driving in a straight line, gear shifting operation, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night.
5
1
Share

Are People Who Fail the Subject 3 Test Stupid?

C1 Subject 3 failure does not necessarily indicate stupidity, as there are many common points where deductions occur, and paying more attention can make passing easier. More details are as follows: Subject 3 has numerous test items and requires attention to more details: The Subject 3 test covers a wide range of items, including 16 test components such as pre-driving preparations, light simulation test, starting, lane changing, overtaking, and U-turns. With so many test items, there are numerous details to pay attention to, and candidates may fail if they are not careful. Less practice time for Subject 3: The practice time for Subject 3 is only three to four days, which is relatively short. With limited practice, candidates may not be proficient in the mechanical performance of the vehicle, making it easy to encounter issues during the test. Mindset is more crucial for Subject 3: Since Subject 3 is conducted on actual driving roads with heavy traffic, candidates need to pay attention not only to details but also to other vehicles and road conditions. For candidates, besides nervousness, there is also fear. Therefore, adjusting one's mindset is crucial for passing the Subject 3 test.
19
2
Share

Is Subject 2 Too Difficult or Am I Just Stupid?

No, Subject 2 is generally challenging. The difficult aspects of the driving license Subject 2 test include: Reversing into a parking space: This is widely considered the hardest part of the Subject 2 test, with the main challenge being timing the steering correctly. Hill start and stopping on a slope: Rolling back or stalling during the start is a common issue on slopes. If the car shows signs of rolling back while releasing the brake, immediately press the brake and clutch firmly to stabilize the vehicle, then restart using the same method. Right-angle turn: There are several methods to navigate a right-angle turn, the simplest being to turn the steering wheel quickly when the hood covers the opposite yellow line.
15
3
Share

Evaluation Criteria for Reversing into Garage in Subject 2 Driving Test

The passing criteria for reversing into garage in Subject 2 are: driving according to the specified route and sequence, keeping the vehicle body within the lines, no stopping during the process, successfully reversing into the garage, and completing the task within 4 minutes. Below are the detailed requirements for reversing into garage: Introduction: Reversing into garage is a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to maneuver the vehicle in a designated area. Reversing into garage is a key assessment point in the driver's test, which involves correctly reversing the vehicle into the garage from both sides while in motion. Dimensions: The test area is 16m in length and 6.83m in width, while the garage is 5.25m in length and 2.31m in width. Evaluation: Failure to follow the specified route and sequence results in disqualification. Disqualification also occurs if the vehicle body crosses the lines, fails to enter the garage, stops during the process, or exceeds the 4-minute time limit for completing the task.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.