Where is the air conditioning filter of Mercedes-Benz S600 located?

How to Refill Automotive Cooling Oil?

Automotive cooling oil refilling method: 1. For air conditioning systems, first evacuate the refrigeration system; 2. Use a graduated measuring cup to add the required amount of refrigeration lubricating oil; 3. Connect the manifold gauge to the air conditioning system, detach the low-pressure hose from the gauge assembly and immerse it in the cooling oil, while keeping the high-pressure hose connected to the high-pressure service valve and the center hose connected to the vacuum pump; 4. Start the vacuum pump and open the high-pressure manual valve to draw the cooling oil into the compressor. Precautions for refilling automotive cooling oil: 1. Do not mix cooling oils of different brands; 2. Cooling oil readily absorbs moisture and, in the presence of oxygen, can form acidic substances resembling oleic acid that corrode metal components, so always tighten the cap immediately after use; 3. Do not use deteriorated cooling oil; 4. Cooling oil does not provide refrigeration and can hinder heat exchanger efficiency, so never use excessive amounts to avoid reducing cooling capacity.

20

3

Share

How is the wading capability of the NIO ES6?

The wading capability of the NIO ES6 depends on its maximum wading depth, which is 450mm. The wading depth of the NIO ES6 is determined by the height of the vehicle's chassis, specifically the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the NIO ES6 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water intake. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.

1

2

Share

Do I need to change the license plate when changing cars?

Changing cars requires changing the license plate. According to relevant regulations, when the vehicle management office handles the registration of motor vehicle changes and needs to change the motor vehicle license plate number, the license plate and driving license will be recovered, a new motor vehicle license plate number will be determined, and the license plate, driving license, and inspection qualification mark will be reissued. The vehicle license plate number can be retained under the name of the original owner under certain conditions: 1. If the old car has been transferred or scrapped and the original owner has used the license plate for more than one year, the original license plate number can be used. When transferring ownership, the license plate number will automatically be retained under the name of the original owner for one year without the need for retention procedures; 2. Within one year after the vehicle is transferred, the original owner can apply to the vehicle management office to use the original license plate number. If the original owner does not apply to use it within one year, the license plate number will be re-entered into the selection pool and publicly released to the public; 3. If the original motor vehicle is involved in road traffic safety violations or traffic accidents, these must be resolved first.

18

1

Share

Where to Check the Car Engine Number?

The engine number can be found on the outer surface of the engine block, on the vehicle's nameplate, or the engine compartment nameplate. It can also be checked on the car purchase invoice, the factory certificate (which includes the engine number), the operation permit for commercial vehicles, the vehicle purchase tax payment certificate, the registration records at the public security authority, or the vehicle insurance card. The simplest and most direct method is to check the vehicle's administrative green book or the vehicle registration certificate. Engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It represents information such as the manufacturer, specifications, performance, features, technology, purpose, and batch of the engine, including fuel type, number of cylinders, displacement, and static brake power. Engines installed in passenger cars or multi-purpose vehicles are marked with the professional manufacturer's name, model, and production number as required. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and multiple engines can share the same model. The engine number, however, is the production number of the engine, unique to each individual engine. Composition of the car engine number: Front part: Includes the product series code, generation symbol, and regional or corporate code, which are selected by the manufacturer as needed but must be approved and recorded by the industry standard regulatory body. Middle part: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear part: Composed of symbols for structural features and usage characteristics. Tail part: Distinguishing symbol. When differentiation is needed within the same series due to improvements or other reasons, the manufacturer selects an appropriate symbol. The rear and tail parts can be separated by a hyphen (-).

9

0

Share

Where is the fuel tank cap switch located on a Chevrolet?

The fuel tank cap switch on a Chevrolet is located on the fuel tank cap itself. This model uses a press-to-open mechanism, where pressing the fuel tank cap while the car is unlocked will open it. Currently, there are two main types of fuel tank cap opening mechanisms in cars: press-to-open and switch-controlled. The press-to-open method is more common in American and German cars. The switch-controlled method involves using a button inside the car to open the fuel tank cap, with the button's location varying by model. Taking the Chevrolet Cavalier as an example, its body dimensions are 4474mm in length, 1730mm in width, and 1471mm in height, with a wheelbase of 2600mm. In terms of power, it is equipped with a 1.0T 125-horsepower L3 turbocharged engine, paired with a 6-speed automatic transmission. The suspension system features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.

5

Share

Is it necessary to repair a rice-grain-sized paint chip?

A rice-grain-sized paint chip does not require immediate repair. Solution: Instead of repainting, you can temporarily use a touch-up pen to address the issue and handle it with a full repaint later. A touch-up pen is a tool for repairing minor car paint scratches. Simply select the appropriate model matching your car's original paint color. Applying the touch-up pen to small scratches or paint chips can repair, conceal, and smooth out the damage. The composition of touch-up pens typically matches the original car paint, and since car models vary, only specialized touch-up pens designed for specific vehicles should be used. Introduction to Automotive Paint: Automotive paint is a protective film sprayed onto cars, serving as a type of coating that prevents easy corrosion of the vehicle body while also enhancing aesthetic appeal. Different automotive paints produce different effects, and the quality of the paint itself, along with application techniques and a suitable painting environment, is crucial. Most car owners invest significant effort in beautifying their vehicles, as it is a way to express individuality. The main characteristics of automotive paint performance include excellent film fullness, high gloss, superior hardness, strong adhesion, and outstanding mechanical properties. The paint film maintains exceptional gloss retention, weather resistance, and abrasion resistance, along with good resistance to acids, alkalis, alcohol, and gasoline.

20

1

Share

Where is the air conditioning filter of Mercedes-Benz S600 located?

How to Refill Automotive Cooling Oil?

How is the wading capability of the NIO ES6?

Do I need to change the license plate when changing cars?

Where to Check the Car Engine Number?

Where is the fuel tank cap switch located on a Chevrolet?

Is it necessary to repair a rice-grain-sized paint chip?

How to remove the wrench icon on Maxus G10?

Is the Volkswagen Phideon an Imported or Joint Venture Vehicle?

What Causes the Tachometer Not to Return to Zero?

What causes the car to feel jerky?