Where is the air conditioning filter of Jiangling Ford Transit located?

2 Answers
Betty
07/29/25 1:34am
Jiangling Ford Transit air conditioning filter is located behind the glove box on the passenger side. More information about the air conditioning filter is as follows: 1. The air conditioning filter is an important part of the car air conditioning system, which can prevent impurities from entering the air conditioning system and affecting its normal operation. 2. The air conditioning filter can purify the air to a certain extent, maintaining a relatively comfortable environment inside the car. Generally, the air conditioning filter should be replaced every 5,000-8,000 kilometers. 3. If the air conditioning filter is not cleaned and replaced in time, when it is blocked by foreign objects, it will affect the normal operation of the air conditioning system and cause unnecessary trouble. Some models' air conditioning filters cannot be cleaned and can only be replaced.
Was this review help?
19
2
Share
AdrianaDella
08/12/25 5:40am
On the Jiangling Ford Transit, the cabin air filter is generally located behind the glove compartment on the passenger side. After removing the glove box, you'll see a cover or panel—opening it allows access to the filter. The glove box is easy to remove, typically by pressing the clips on both sides; handle gently to avoid damage. When replacing the filter, pay attention to the airflow direction arrow to ensure correct installation. Regularly changing the filter is crucial to prevent dust and bacterial buildup, keeping the AC air fresh and reducing cabin odors. I often help friends with vehicle maintenance and recommend checking it every 6 months or 10,000 km. In dusty environments, replace more frequently to avoid reduced airflow or mold growth. If unfamiliar with the process, consult the vehicle manual or visit a professional shop for safety. Overall, the accessible design makes DIY maintenance easy, saving time and money for owners.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

Is the Jaguar Logo a Lion or a Leopard?

The Jaguar logo is a leopard. Jaguar's vehicle models include: Jaguar XFL, Jaguar XEL, Jaguar XJ, Jaguar XF, Jaguar F-PACE, etc. Taking the 2020 Jaguar XEL as an example, it belongs to the mid-size car category, with body dimensions of: length 4778mm, width 1850mm, height 1429mm, wheelbase of 2935mm, fuel tank capacity of 62L, and curb weight of 1730kg. The 2020 Jaguar XEL features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 200PS, maximum power of 147kW, maximum torque of 320Nm, paired with an 8-speed automatic transmission.
16
5
Share

Is the new Sylphy compliant with China 6b emission standards?

The new Sylphy is compliant with China 6b emission standards. Taking the 2021 Sylphy Deluxe Edition as an example, its body structure is a 4-door, 5-seater sedan with dimensions of 4631mm in length, 1760mm in width, and 1503mm in height. It has a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a trunk capacity of 510 liters. The 2021 Sylphy Deluxe Edition features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122 PS, a maximum power of 90 kW, and a maximum torque of 155 Nm, paired with a 5-speed manual transmission.
1
4
Share

What should be done if the engine oil level exceeds the dipstick mark?

If the engine oil level exceeds the dipstick mark, it should be drained to the normal level. The functions of engine oil are: 1. To reduce wear between the piston and cylinder, and between the crankshaft and bearings, providing lubrication; 2. To assist in cooling the internal parts of the engine; 3. To clean carbon deposits, sludge, and metal particles from engine components; 4. To reduce gas leakage and prevent the entry of external contaminants; 5. To cushion the load on pistons, piston rings, connecting rods, and crankshaft bearings; 6. To reduce friction, save energy consumption, and minimize wear. Types of engine oil include: 1. Conventional mineral oil; 2. Semi-synthetic oil; 3. Fully synthetic oil.
16
1
Share

How to Replace the Battery in an MG Car Key?

To replace the battery in an MG car key, follow these steps: 1. Locate the silver button at the top of the car key; 2. Press the button, and the mechanical key will automatically pop out; 3. Once the key is open, you will see a gap in the middle. Use a flat-head screwdriver to slide along the gap and pry it open; 4. After opening the back cover, you will see the battery panel. Remove the old battery and install the new one. MG car models include the MG6, MG5, MG ZS, MG HS, MG3, and others. Taking the 2020 MG6 as an example, its body dimensions are: length 4704mm, width 1848mm, height 1466mm, with a wheelbase of 2715mm, a fuel tank capacity of 50 liters, and a trunk capacity ranging from 499 to 1383 liters.
11
3
Share

How to Remove Asphalt from Car Body?

Asphalt is mainly composed of hydrocarbons, which are insoluble in water but soluble in carbon disulfide. Here are the methods to remove asphalt from car body: 1. Tar remover: Special tar remover can quickly penetrate and dissolve asphalt, effectively removing tar and asphalt stains from car body and wheel hubs. It has excellent stain removal, cleaning, and polishing effects. However, it is somewhat corrosive, so rinse with clean water after cleaning. 2. Using essential balm: Essential balm can also dissolve asphalt. Drop a few drops of essential balm on the asphalt surface of the car body, wait for 5 minutes, and then wipe clean with a wet towel. 3. Using diesel: Gasoline can be used to remove asphalt from cars, but it is not very friendly to the paint surface. It is recommended to use diesel, which can also dilute and dissolve asphalt.
11
0
Share

What Are Some Tips When the Car Lock Cylinder Won't Turn?

Tips for when the car lock cylinder won't turn are to gently twist the key with your right hand while lightly turning the steering wheel with your left hand. The lock cylinder, also known as the ignition switch, is a multi-position switch that requires the corresponding key to operate it. The ignition switch is typically used to control the ignition circuit, instrument circuit, electronic control system, starting circuit, and auxiliary electrical circuits. The method for replacing a car lock cylinder is: 1. Remove the plastic cover and use a hex screwdriver to disassemble the ignition switch; 2. Unplug the ignition switch connector, detach the lock cylinder, and install the new lock cylinder. When installing the lock cylinder, insert the key into the lock cylinder, turn it to the 'on' position, and press the metal block on the ignition switch face. If the ignition switch is not disassembled, you cannot press the metal block.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.