Where is the air conditioning filter of Jiangling Baodian located?

What is the reason for the Lavida's air conditioning not cooling?

Here are the specific reasons and solutions for the Lavida's air conditioning not cooling: Insufficient or low refrigerant: It may be caused by a small refrigerant leak. This can be observed from the sight glass on the dryer tank. During normal operation of the air conditioning, if continuous bubbles are seen in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it indicates a severe shortage of refrigerant. In this case, simply adding refrigerant will solve the problem. Loose drive belt of the car air conditioning compressor: If the drive belt is loose, the compressor will slip during operation, leading to reduced transmission efficiency and a decrease in compressor speed. This results in reduced delivery of compressed refrigerant, causing the car air conditioning to not cool. If the compressor drive belt is too loose, it should be tightened. If it cannot be turned by hand, it means the belt is too tight and should be loosened slightly. If tightening is ineffective, or if the drive belt has cracks, aging, or other damage, a new drive belt should be replaced.

5

2

Share

What are the reasons for the Bluetooth connection failure in older imported Koleos models?

Older imported Koleos models may experience Bluetooth connection failures due to instability factors in electronic devices. First, try turning off some of the vehicle's electrical devices and then attempt to reconnect. Sometimes, the car's Bluetooth cannot connect because the call audio is not selected. It is recommended to enable the audio function on your phone's Bluetooth. Here is some relevant information about car Bluetooth: Function: After successful Bluetooth pairing, you can use your phone to play audio files or answer calls, which is very convenient. While driving, it ensures road safety. Once the car's system and Bluetooth are connected, you can make calls directly through the car's system in hands-free mode. Automatic connection: Once your phone and car system are connected, they will automatically reconnect the next time you use them, provided your phone's Bluetooth is turned on. This eliminates the need for frequent connections, saving time and adding convenience to vehicle use. However, when using Bluetooth calls, be mindful of privacy concerns.

6

1

Share

What Causes Blackening of the Exhaust Pipe?

The reason for the blackening of the exhaust pipe is that the oil vapor does not burn completely, and some of it is carbonized when passing through the three-way catalytic converter. The accumulated carbon over time leads to the blackening of the exhaust pipe. Precautions for exhaust pipe maintenance include: 1. Close the choke when starting the engine cold in winter and open it promptly after the engine warms up; 2. Avoid installing windshields or decorative items in front of the engine and muffler as they may affect heat dissipation; 3. Avoid prolonged driving at high load in low gear, which can damage the engine and muffler; 4. Avoid revving the engine at high speeds while stationary for extended periods; 5. Clean the muffler surface promptly when it is covered with a large amount of mud or other dirt to prevent affecting heat dissipation; 6. Ensure the muffler gasket is properly installed and tightly secured during installation to prevent air leaks.

6

1

Share

Where is the OBD interface of the old Bora?

Volkswagen Bora's OBD interface is located next to the battery in the engine compartment, used to connect to the car diagnostic computer. Through this interface, you can check the car's faults or modify the car's computer functions to unlock some hidden features. Additional information about the Volkswagen Bora's OBD interface is as follows: Function: The OBD on-board diagnostic system must have the ability to identify potential fault areas and store this information in the electronic control unit's memory in the form of fault codes. OBD is a system that monitors emission-related functions and components using hardware or software and alerts the driver through the MIL light and DTC fault codes for necessary inspection and repair. Precautions: The OBD interface should not be used indiscriminately. Some owners have connected a laptop to the OBD interface of the Bora 1.8T to test real-time data such as turbo performance, but unexpectedly encountered an issue. Due to the limited battery life of the laptop, it automatically shut down while the car was moving, causing the vehicle to stall at the moment the computer turned off, which is quite dangerous.

14

4

Share

What Are the Reasons Why a Push-Start Car Sometimes Fails to Start?

The reasons why a push-start car sometimes fails to start are: 1. The fuel filter is clogged; 2. Severe carbon buildup or erosion of the spark plugs; 3. The gear is not in the P position. The reasons why a car fails to start after being parked for a long time are: 1. The car battery is dead; 2. Low temperature causes the viscosity and rotation speed of the engine oil to decrease; 3. Issues with the ignition system; 4. Insufficient fuel in the car; 5. Excessive carbon buildup inside the vehicle's engine; 6. Damage to the fuel pump, preventing fuel in the tank from being supplied for combustion. The solutions are: 1. Check if the battery is dead; 2. Check if the fuel pump is damaged; 3. Check if the fuel level is sufficient; 4. Check if the engine sensors are damaged; 5. Check if there are issues with the ignition system; 6. Use a heating rod to warm up the engine oil.

1

2

Share

What are the effects of not changing the transmission oil for 200,000 kilometers in a Lavida?

The effects of not changing the transmission oil for 200,000 kilometers in a Lavida are as follows: Impact on clutch plate engagement: If the transmission oil is not replaced for a long time, metal shavings inside the transmission will accumulate. When they reach a certain level, they will affect the physical properties of the transmission oil, thereby impacting the engagement of the clutch plates and the operation of the gears. This leads to a significant reduction in clutch pressure and increased metal wear between the gears. Severe power loss: The eventual result is a severe drop in power, to the point where the car may not move even in D gear. At this stage, the drained transmission oil will contain a large amount of metal shavings. Transmission overheating: Besides lubrication, transmission oil also cools the transmission. Prolonged use of old oil will cause the transmission to overheat continuously. This heat further weakens the viscosity and lubricity of the transmission oil, creating additional friction. Components such as O-rings, gaskets, rubber seals, and other sealing parts in automatic transmissions may also deform or melt due to overheating.

16

3

Share

Where is the air conditioning filter of Jiangling Baodian located?

What is the reason for the Lavida's air conditioning not cooling?

What are the reasons for the Bluetooth connection failure in older imported Koleos models?

What Causes Blackening of the Exhaust Pipe?

Where is the OBD interface of the old Bora?

What Are the Reasons Why a Push-Start Car Sometimes Fails to Start?

What are the effects of not changing the transmission oil for 200,000 kilometers in a Lavida?

What are the differences between the Levin and Corolla?

What to Do When the Steering Wheel Feels Lighter on One Side?

Why doesn't the Haval M6 beep when locking the car?

Is Lavida from FAW-Volkswagen or SAIC Volkswagen?