Where is the air conditioning filter of Haima M5 installed?

1 Answers
DiLeah
07/30/25 7:36am
Haima M5's air conditioning filter is located behind the glove box on the passenger side. Here is some relevant information about the air conditioning filter: 1. Replacement: To replace the air conditioning filter, first locate the filter's slot. Open the clip located at the front of the passenger side in the engine compartment, then remove the sound insulation material inside. The clip is very fragile, so be careful when opening it to avoid damage. After removing the filter, reach into the panel to take out the air conditioning filter. There is an arrow indicator on the outer side of the filter; make sure not to install it backward. 2. Function: The air conditioning filter plays a crucial role in the cooling function of the air conditioning system. It filters the air entering the cabin from the outside, improving air cleanliness. It also filters out tiny impurities, pollen, dust, etc., providing a good air environment for passengers and protecting their health.
Was this review help?
11
1
Share
More Forum Discussions

Why Can't the Right Rear Door Be Opened from the Inside?

It may be due to the child lock being engaged. It is recommended to check the sliding switch on the side of the right rear door. In most cases, this is a normal phenomenon. Generally, there is a child lock on the rear door locks, which serves to prevent children from mischievously pulling open the door from the inside without adult supervision, thereby avoiding potential dangers. More relevant information is as follows: 1. Location: The child lock toggle is usually located on the side of the rear door, accompanied by an image of two locks. Toggling the switch to the lock position activates the child lock, preventing the door from being opened from the inside; it can only be opened from the outside under normal circumstances. Toggling the switch to the unlock position deactivates the child lock, allowing the door to be opened from the inside when the vehicle is fully unlocked. 2. Note: If the child lock is not engaged and the vehicle is fully unlocked, but the door still cannot be opened from the inside, it may indicate a malfunction in the door lock mechanism. In such cases, inspection and repair should be considered based on the situation.
7
4
Share

What Causes Abnormal Noise When Pressing the Clutch in a Manual Transmission?

Abnormal noise when pressing the clutch in a manual transmission generally falls into two scenarios: 1. Clutch wear: Many drivers have the habit of keeping their foot on the clutch pedal even after shifting gears. Maintaining this habit for a long time can damage the clutch, leading to wear on the clutch plate and resulting in abnormal noise. 2. Damage to clutch transmission components: When the clutch pedal is pressed, a distinct abnormal noise can be heard from the clutch area, which becomes more noticeable when the pedal is released. The main causes for this situation include: broken clutch pressure plate springs or loose release bearings; fractured clutch discs; broken, excessively worn, or broken adjustment bolts of the clutch release levers.
3
4
Share

Why Can't Some Used Cars Be Transferred?

At this time, the vehicle still has unresolved issues, such as used cars still under mortgage, used cars that have been modified or altered without authorization, including changes in cargo weight or passenger capacity, and used cars with unresolved violations or accidents cannot be transferred. Below are specific details: 1. Other situations where transfer is not possible: If the used car does not meet the local standards for relocation in or out, it cannot be transferred. 2. Corresponding risks: The ownership of the vehicle does not belong to you, and the money spent is essentially wasted. Without the transfer, insurance cannot be obtained, and if there is no third-party liability insurance, any accidents causing harm to a third party will require full compensation to be paid out of pocket.
20
1
Share

How Often Should Valvoline Full Synthetic Motor Oil Be Changed?

Valvoline full synthetic motor oil can be changed once a year or every 10,000 kilometers, whichever comes first. Below are some related details about motor oil: 1. Function: Motor oil, also known as engine lubricating oil (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and absorb shocks, earning it the nickname "the lifeblood of a car." 2. Composition: Motor oil consists of two main components: base oil and additives. The base oil is the primary ingredient of lubricating oil, determining its fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, providing new characteristics and making them an essential part of lubricating oil.
4
1
Share

What documents are required for driver's license review?

Documents required for driver's license review include: original driver's license and its copy, original ID card and its copy, and several recent one-inch white background ID photos. The following is an introduction to driver's license annual review: 1. Large vehicle driver's license: Drivers holding A1, A2, B1, or B2 licenses should go to the traffic management department of the public security authority for review within thirty days after the end of each scoring cycle. However, if there is no record of demerit points during a scoring cycle, the review for that cycle is exempted. 2. Small vehicle driver's license: Drivers holding C1 or below licenses will be reviewed when renewing their licenses upon expiration. However, if they are involved in a traffic accident resulting in death with equal or greater responsibility without their motor vehicle driver's license being revoked, they should go to the traffic management department of the public security authority for review within thirty days after the end of the scoring cycle.
19
2
Share

What are the main aspects to test drive a vehicle?

Test driving a vehicle primarily focuses on evaluating the operation of the engine and transmission, as well as assessing the vehicle's performance in terms of handling, power, comfort, and safety. The following are some precautions to consider during a test drive: 1. Prepare documents in advance: Bring your driver's license and ID card to ensure you have them when needed. 2. Driving experience: Many 4S stores require at least two years of driving experience, so make sure you meet this requirement before test driving. 3. Inspect the vehicle's exterior: According to the test drive procedure, you should first ride as a passenger before driving. Before test driving, it's best to inspect the vehicle's exterior. If there are any existing scratches, it's advisable to inform the salesperson in advance and take photos as evidence to avoid unnecessary trouble.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.