Where is the air conditioning filter of Chery QQ located?

3 Answers
StHeidi
07/28/25 3:14pm
The air conditioning filter of Chery QQ is located at the rear of the glove box on the passenger side. Its functions are: 1. Absorb dust particles; 2. Reduce respiratory pain and irritation for allergy sufferers; 3. Protect the air conditioning cooling system. The Chery QQ is a microcar with body dimensions of: length 3564 mm, width 1620 mm, height 1527 mm, wheelbase 2340 mm, and a fuel tank capacity of 35 liters. The Chery QQ is equipped with a 1.0L naturally aspirated engine, with a maximum power of 51 kW at 6000 rpm, a maximum torque of 130 Nm, and is paired with a 5-speed manual transmission.
Was this review help?
10
5
Share
AlanAnn
08/11/25 7:38pm
I've been driving a Chery QQ for several years and often maintain the cabin air filter myself. It's located behind the glove compartment in front of the passenger seat. To access it, first open and empty the glove box, then locate the clips or screws at its bottom or sides. Carefully loosen or remove them to detach the entire glove box. Behind it, you'll see a rectangular plastic housing—that's the filter slot. Open its cover to pull out the old filter. Regular replacement is crucial. I typically change it every six months, especially in dusty urban areas where grime accumulates quickly. A dirty filter can cause odd odors from the AC, compromising driving comfort and even lung health. DIY replacement is straightforward—compatible filters cost just 20-30 yuan online, and the whole process takes about ten minutes, saving money and hassle compared to shop visits.
Was this review help?
14
3
Share
Expand All
OJasper
09/29/25 5:01am
I really care about in-car health. The air conditioning filter in my Chery QQ is quite thoughtfully designed for daily commuting, located behind the glove compartment on the passenger side. To access it, you first need to open the glove box door, remove the inner tray or accessories, then detach the entire glove box assembly to reveal the filter. The filter's job is to trap dust and particles from outside air, ensuring the airflow stays fresh and odor-free. If left unchanged for too long, it may cause allergies or discomfort, especially in cities with poor air quality. I recommend replacing it twice a year—once in spring and once in autumn—to maintain optimal AC efficiency, faster cooling, and energy savings. DIY replacement isn’t complicated; though hidden, the location is easy to find. The key is developing a regular maintenance habit to enhance the overall driving experience.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

What documents are needed to apply for a temporary license plate for a new car?

Documents required to apply for a temporary license plate for a new car: 1. Original and photocopy of the vehicle certificate of conformity; 2. Original and photocopy of the third copy of the compulsory traffic insurance; 3. Original and photocopy of the first copy of the car purchase invoice; 4. Original and photocopy of the owner's identity proof; 5. For non-local owners, original and photocopy of the owner's temporary residence permit. After gathering all the required documents, go to the traffic management department to fill out the temporary license plate application form, then submit the application at the counter and receive the temporary license plate. There are four types of temporary license plates: temporary license plates for cross-administrative districts, temporary license plates for administrative districts, temporary license plates for special-type motor vehicles, and temporary license plates for testing purposes.
3
0
Share

How to Remove Paint Dots from Car Body?

Methods for removing paint dots from car body: 1. Use a mixture of soap, ammonia, and turpentine in appropriate proportions to remove many stains from glass; 2. Repeatedly stick and peel transparent tape to remove some stains; 3. Use a 4B drawing eraser to wipe off the paint; 4. If possible, use a dedicated cleaner for wiping; 5. First, use a hair dryer to dry the area, then scrape it off; 6. Alcohol can also be used for removal—dip a soft cotton cloth in alcohol and gently wipe the paint; 7. Banana oil can also be used—dip a towel in banana oil and gently wipe the paint dots to dilute the paint, which is highly effective for cleaning paint spots. Finally, rinse with clean water.
9
0
Share

Where is the blower resistor located in an Audi A4?

The blower resistor is located inside the blower assembly in the cabin and serves as a switch to regulate the fan speed. Function of the vehicle blower: When the blower is turned on, if the temperature is set to the lowest setting, the external circulation mode will draw in natural air from outside the vehicle, though slightly warmer. The air intake for the external circulation is typically located between the windshield lower edge and the engine compartment, which introduces some heat from the engine bay. In internal circulation mode, the air blown out will be at the temperature of the cabin. Components of the vehicle blower: The blower mainly consists of the following six parts: motor, air filter, blower body, air chamber, base (also serving as the oil tank), and oil drip nozzle.
1
4
Share

What are the reasons for insufficient battery power in Volkswagen vehicles?

Volkswagen battery power insufficiency can be attributed to vehicle quality issues and personal usage problems. Personal usage problems: Short driving distances leading to insufficient battery charging, prolonged use of high-power electrical appliances, and electrical devices left on after the vehicle is locked. Vehicle quality issues: Battery quality problems resulting in insufficient power storage, short circuits or open circuits between battery poles, loose battery terminal clamps, vehicle body leakage. Regarding the issue of indicator lights being on, since the actual vehicle cannot be seen, an accurate fault diagnosis cannot be made. If this problem is not resolved through this answer, it is recommended to report it to the manufacturer and wait for their response and handling.
10
2
Share

What are the causes of oil leakage from the oil pan of a BMW 525 engine?

BMW 525 engine oil pan leakage can be caused by aging seals, insufficiently tightened oil pan screws, and severe external impact collisions. Poor sealing or aging of the gasket or sealing strip: Sealing strips exposed to high temperatures for extended periods can age, leading to cracking, which makes oil leakage a common occurrence. Insufficiently tightened oil pan screws: If the oil pan screws are not tightened sufficiently, the seal between the engine block and the oil pan deteriorates, resulting in oil leakage from the oil pan. Severe external impact collisions: After a severe external impact collision, the sealing performance of the oil pan may degrade or the pan may crack, leading to oil leakage.
20
2
Share

Why does the Subaru Outback key light stay on?

Subaru Outback key light stays on due to an anti-theft system malfunction. Fuel warning light: When this indicator light stays on, it indicates low fuel level and it's best to refuel promptly. During vehicle startup when the system performs self-check, this light will illuminate briefly before turning off. To preserve fuel pump lifespan, refueling should ideally occur before the fuel warning light activates. Door open indicator: If any door isn't properly closed, the corresponding indicator light on the display will illuminate. Seatbelt indicator: The seatbelt indicator on the car dashboard shows whether seatbelts are locked. When illuminated, it means seatbelts aren't properly fastened. Some models will emit warning sounds. The indicator automatically turns off when seatbelts are properly fastened.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.