Where is the air conditioning filter of Bin Yue located?

1 Answers
VanDonovan
07/30/25 3:52am
The air conditioning filter of Bin Yue is located behind the glove compartment on the passenger side. To replace it, open and flip down the glove compartment, then you can see the air conditioning filter and remove it directly for replacement. The air conditioning filter is a type of filter installed in the car's air conditioning system, which can absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. Taking the Bin Yue 2020 240T manual archer as an example: it is a compact SUV launched by Geely Auto, with dimensions of 4330mm in length, 1800mm in width, and 1609mm in height, a wheelbase of 2600mm, equipped with a 1.4T turbocharged engine, matched with a 6-speed manual transmission.
Was this review help?
7
2
Share
More Forum Discussions

How many points are deducted for not pulling the handbrake all the way?

Not pulling the handbrake results in a 100-point deduction. Main factors leading to failure in the right-angle turn during Subject 2: Vehicle speed, driving close to the left line, aligning the vehicle after entering the right angle, timing of the right-angle turn, and lack of proficiency. Controlling the vehicle's speed is the prerequisite and foundation for passing every item in Subject 2, including the right-angle turn. Identifying the right moment to turn the steering wheel is the key to passing this item. The turning action should be quick, precise, and decisive. Subject 2 reversing into the garage technique: Do not intentionally turn the steering wheel too early or too late. At the starting point of reversing into the garage, keep both hands ready to turn the steering wheel at any time. The emphasis is on the phrase 'ready at any time.' Maintain a steady speed—'move slowly, turn quickly.'
20
2
Share

How to Remove the Spare Tire of the Excelle?

The method to remove the spare tire of the Excelle is to use a wrench to loosen the fixing screws. The purpose of the spare tire is to prevent the car from breaking down due to tire damage. Precautions for replacing the spare tire include: 1. Turn off the engine, pull up the handbrake, and engage the gear to prevent the vehicle from rolling; 2. Place a triangular warning sign and turn on the hazard lights; 3. Tighten the bolts diagonally when replacing the spare tire; 4. Adjust the air pressure of the spare tire with a pressure gauge before replacement; 5. Replace the valve stem at the same time. The Excelle has a body length, width, and height of 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm. It is equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125PS, a maximum power of 92kW, and a maximum torque of 170Nm, paired with a 6-speed manual transmission.
9
1
Share

What Does Driving License Subject 3 Test?

Subject 3 road driving skills test generally includes: preparation before getting on the car, light simulation test, starting, driving in a straight line, shifting gears up and down, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving. The difficulties of the Subject 3 test are as follows: 1. Speed and gear mismatch: Errors regarding high gear at low speed and low gear at high speed should be noted during the test. Before shifting gears, it is necessary to increase or decrease the speed to match the gear, and then switch gears. 2. Deviation in straight-line driving: Many trainees deliberately slow down the speed during driving because they are worried that the driving trajectory is not straight, which is not advisable. This will instead increase the possibility of the vehicle's driving trajectory deviating, so a reasonable and constant speed should be maintained.
20
4
Share

What are the causes of abnormal brake noise while driving?

The causes of abnormal brake noise while driving are: 1. Improper installation of brake pads causing abnormal friction; 2. Hard objects such as sand, gravel, or metal fragments stuck in the brake pads; 3. Inconsistent size of the friction blocks in the brake pads or severe wear of the brake pads; 4. Insufficient break-in period for the brake pads. The materials used for brake pads include: 1. Asbestos, cellulose, sintered glass; 2. Carbon fiber friction materials; 3. Powder metallurgy friction materials; 4. Semi-metallic friction materials. The method for replacing brake pads is as follows: 1. Open the engine compartment to check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take out the brake pads; 4. Install new brake pads, tighten the guide bolts, and complete the replacement.
19
0
Share

What is the appropriate front tire pressure?

The appropriate front tire pressure is between 2.2 and 2.5 bar. The hazards of excessive tire pressure are: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Causes steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates localized wear on the central tread pattern, shortening tire lifespan; 4. Increases vehicle vibration, indirectly affecting the lifespan of other components. Factors influencing tire pressure include: 1. Seasonal factors: In winter, it is advisable to increase the tire pressure by 0.2 bar based on the standard tire pressure, while in summer, for vehicles parked outdoors, the pressure can be 0.1 bar lower than the standard to prevent blowouts due to high temperatures; 2. Measurement environment: The tire pressure differs between cold and hot tires, with a typical difference of 0.3 bar that should be noted during measurement.
3
2
Share

What types of car insurance are best to buy?

There are four main types of car insurance to consider: Vehicle Damage Insurance, Third-Party Liability Insurance, No-Deductible Special Coverage, and Compulsory Traffic Insurance. Here are the details:1. No-Deductible Special Coverage: When an accident covered by Vehicle Damage Insurance or Third-Party Liability Insurance occurs, this insurance covers the deductible amount that the policyholder would normally have to pay.2. Vehicle Damage Insurance: This covers the cost of repairs to your own vehicle. The premium for this insurance is closely related to the purchase price of the car and the number of seats. In other words, the more expensive the car, the higher the premium. With this insurance, the policyholder doesn’t have to bear the repair costs, making it essential for vehicle protection.3. Third-Party Liability Insurance: Similar to Compulsory Traffic Insurance, this covers compensation for third-party victims, effectively serving as a supplement to Compulsory Traffic Insurance.4. Compulsory Traffic Insurance: According to Chinese traffic regulations, every car must pay an annual fee for this insurance. Driving without it can result in fines and penalty points if caught.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.