Where is the air conditioning filter of Audi A3 located?

Is the Dongfeng Infiniti Q50L domestically produced?

Infiniti Q50L is domestically produced, which is a mid-size sedan under the Infiniti brand. This car competes with luxury brand B-segment sedans such as the BMW 3 Series, Mercedes-Benz C-Class, and Audi A4L. The Infiniti Q50L is a long-wheelbase model, hence the letter 'L' in its name. Below are some details about the Infiniti Q50L: 1. The Infiniti Q50L is equipped with a 2.0-liter turbocharged engine across the entire lineup. This engine delivers a maximum power of 155 kW and a peak torque of 350 Nm. The engine reaches its maximum torque output at 1500 rpm and maintains it up to 3500 rpm. The maximum power output of this 2.0-liter turbocharged engine is achieved at 5500 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed automatic transmission (7AT). 2. The Infiniti Q50L uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. Both front and rear suspensions are equipped with stabilizer bars. While stabilizer bars may slightly reduce ride comfort, they enhance the car's handling performance and help minimize body roll. The double-wishbone independent suspension helps reduce brake dive and body roll, while also improving cornering speed. The multi-link suspension enhances wheel traction, further improving the car's handling.

14

4

Share

What is the fuel tank capacity of the Nissan Qashqai in liters?

The fuel tank capacity of the Nissan Qashqai is 57 liters, as officially announced. Owners who have purchased the Qashqai can also check this information on the vehicle's configuration sheet. The Qashqai requires 92-octane fuel, with a fuel consumption of 6.2 to 6.4L per 100 kilometers. A full tank can provide a driving range of approximately 891 to 919 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, leaving some space between the safe limit and the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

15

2

Share

What type of engine oil should be used for the Changan Oshan X5?

Changan Oshan X7 uses engine oil with the specification 5W-30. The X7 utilizes original manufacturer-branded engine oil. For subsequent maintenance and oil changes, you may choose from brands such as Shell, Mobil, Castrol, or Total. The viscosity of engine oil changes with temperature, so it's crucial to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the vehicle. The latter number represents the oil's kinematic viscosity at 100°C. A higher value indicates better ability to maintain viscosity under high temperatures, which can also be interpreted as better lubrication performance in high-temperature conditions. The method for changing the engine oil in the Changan Oshan X7 is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan; Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the filler cap on the engine valve cover, typically filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for any leaks around the drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the dipstick to check that the engine oil level is within the standard range.

16

3

Share

Where is the diagnostic port of the Peugeot 3008 located?

The OBD diagnostic interface of the Peugeot 3008 is located in the fuse box area below the left side of the steering wheel. Simply pull the cover panel outward to access it. The OBD interface is the black and green socket. OBD stands for On-Board-Diagnostic, which translates to "On-Board Diagnostic System" in Chinese. This system continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment system. If any condition that may cause excessive emissions is detected, it will immediately issue a warning. When a fault occurs in the system, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate. At the same time, the OBD system stores the fault information in memory, which can be read in the form of fault codes through standard diagnostic tools and interfaces. Based on the fault codes, maintenance personnel can quickly and accurately determine the nature and location of the fault. The Peugeot 3008 has body dimensions of 4435mm in length, 1840mm in width, and 1652mm in height, with a wheelbase of 2613mm. It is equipped with a 1.6-liter turbocharged engine, delivering a maximum horsepower of 167ps. This engine provides greater output power and torque while further improving fuel economy and reducing exhaust emissions. The Peugeot 3008 comes with a 6-speed automatic transmission, a top speed of 205 km/h, a front MacPherson strut independent suspension, and a rear torsion beam non-independent suspension. The tire specifications are 225/50R17. System Structure: Scanner: The OBD-II regulation specifies fault codes, numerous engine management sensor signals, computer commands, etc., which can be read through a universal scanning tool. Oscilloscope: Oscilloscopes come in both desktop and handheld versions. Using an analog oscilloscope to check ignition system faults has been practiced for decades, but it is entirely different from modern laboratory oscilloscopes. Traditional analog oscilloscopes require the displayed signal to be a repeating periodic signal, whereas laboratory oscilloscopes display the signal in real-time. Due to the high sampling frequency, every important detail of the signal is displayed, allowing any signal that could cause a fault to be identified while the engine is running. Interface: The OBD-II program is designed to avoid confusion between systems, requiring the use of a standard 16-pin diagnostic interface, specific coding, and component descriptions in the manufacturer's documentation to achieve uniformity and standardization. Every vehicle is equipped with a standard-shaped and sized 16-pin diagnostic interface, with each pin's signal allocation identical and located in the same position, installed below the dashboard, somewhere between the left side of the dashboard and 300mm to the right of the vehicle's centerline. The OBD device monitors multiple systems and components, including the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, EGR, etc. OBD connects various emission-related component information to the Electronic Control Unit (ECU), which has the capability to detect and analyze emission-related faults. When an emission fault occurs, the ECU records the fault information and related codes, and issues a warning through the malfunction indicator lamp to inform the driver. The ECU ensures access to and processing of fault information through a standard data interface.

18

5

Share

How to Repair a Diesel Engine Radiator Leak?

If the freshwater pump monitoring hole also shows signs of leakage, the freshwater pump should be removed from the engine body, disassembled, and the water seal replaced. For repairing the upper and lower water chambers of the radiator, after identifying the leaking area, clean the affected part thoroughly and then repair it with soldering.

5

3

Share

What to Do When the Left Reverse Parking is Too Close to the Left Side?

Turn the steering wheel one full turn plus 90 degrees to the left when there is still some distance to the parking line in the left rearview mirror. Predict whether the car body will cross the line; if you continue reversing in the current direction and the distance between the car body and the corner of the parking space is too narrow, turn the steering wheel back half a turn to widen the distance.

20

3

Share

Where is the air conditioning filter of Audi A3 located?

Is the Dongfeng Infiniti Q50L domestically produced?

What is the fuel tank capacity of the Nissan Qashqai in liters?

What type of engine oil should be used for the Changan Oshan X5?

Where is the diagnostic port of the Peugeot 3008 located?

How to Repair a Diesel Engine Radiator Leak?

What to Do When the Left Reverse Parking is Too Close to the Left Side?

Does the Sylphy have an anti-collision beam?

Where is the Highlander Engine Number Located?

Why Can the Car Still Move When the Handbrake Is Engaged?

How to Replace the Battery in a Focus Key?