Where is the air conditioning filter located in the Zotye T700?

3 Answers
OAurora
07/29/25 8:12pm
The air conditioning filter of the Zotye T700 is located under the front passenger seat, near the left foot position, and can be seen towards the inner side. The air conditioning filter is a type of filter installed in the car's air conditioning system, which can absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the cooling system of the air conditioner. Below is more information about the Zotye T700: 1. Model: Taking the Zotye T700-1.8T Dual Clutch Custom Edition as an example, it is a mid-size SUV from Zotye Auto. 2. Engine: Equipped with a 1.8T 177 horsepower L4 engine, paired with a 6-speed dual-clutch transmission, the engine has a maximum power of 130kW and a maximum torque of 245Nm.
Was this review help?
1
1
Share
VanessaAnn
08/14/25 4:32pm
I used to drive a Zotye T700, and the cabin air filter is hidden behind the glove compartment on the passenger side—pretty easy to locate. First, empty the glove box and carefully inspect its side walls or bottom, where plastic clips or screws secure it. Press the clips lightly or remove the screws, and you can pull down the entire glove box to reveal the filter housing inside. Open the housing cover, and there lies the filter, usually with the arrow facing outward—don’t install it backward. I recommend replacing it yourself instead of going to a dealership—saves money and hassle. Choose a high-quality filter and replace it every six months to keep the cabin air fresh and improve cooling efficiency. In winter, with more dust, replacing it early prevents clogging and greatly enhances comfort on long drives. Just remember not to use excessive force to avoid breaking the clips.
Was this review help?
11
5
Share
Expand All
Angelo
10/16/25 3:05am
Based on my experience in car maintenance, the Zotye T700's cabin air filter is thoughtfully designed and conveniently located inside the glove compartment in front of the passenger seat. To access it, first empty the glove box, then locate the limiters or clips on both sides of the compartment. Push them with your fingers or remove small screws to allow the glove box to slide downward. The filter is encased in a bracket, and you can remove it by opening the cover plate. When installing a new filter, pay attention to the arrow indicating the airflow direction to avoid installing it upside down. A dirty filter not replaced in time can affect the air conditioning performance, such as reduced airflow or unpleasant odors. I recommend using original or compatible parts for a safer fit. During routine maintenance, take a moment to inspect the filter mesh. Cleaning the dust monthly can extend its lifespan and improve the in-car air quality, which is especially important during smoggy days.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What documents are needed to apply for a temporary license plate for a new car?

Documents required to apply for a temporary license plate for a new car: 1. Original and photocopy of the vehicle certificate of conformity; 2. Original and photocopy of the third copy of the compulsory traffic insurance; 3. Original and photocopy of the first copy of the car purchase invoice; 4. Original and photocopy of the owner's identity proof; 5. For non-local owners, original and photocopy of the owner's temporary residence permit. After gathering all the required documents, go to the traffic management department to fill out the temporary license plate application form, then submit the application at the counter and receive the temporary license plate. There are four types of temporary license plates: temporary license plates for cross-administrative districts, temporary license plates for administrative districts, temporary license plates for special-type motor vehicles, and temporary license plates for testing purposes.
3
0
Share

How to Remove Paint Dots from Car Body?

Methods for removing paint dots from car body: 1. Use a mixture of soap, ammonia, and turpentine in appropriate proportions to remove many stains from glass; 2. Repeatedly stick and peel transparent tape to remove some stains; 3. Use a 4B drawing eraser to wipe off the paint; 4. If possible, use a dedicated cleaner for wiping; 5. First, use a hair dryer to dry the area, then scrape it off; 6. Alcohol can also be used for removal—dip a soft cotton cloth in alcohol and gently wipe the paint; 7. Banana oil can also be used—dip a towel in banana oil and gently wipe the paint dots to dilute the paint, which is highly effective for cleaning paint spots. Finally, rinse with clean water.
9
0
Share

Where is the blower resistor located in an Audi A4?

The blower resistor is located inside the blower assembly in the cabin and serves as a switch to regulate the fan speed. Function of the vehicle blower: When the blower is turned on, if the temperature is set to the lowest setting, the external circulation mode will draw in natural air from outside the vehicle, though slightly warmer. The air intake for the external circulation is typically located between the windshield lower edge and the engine compartment, which introduces some heat from the engine bay. In internal circulation mode, the air blown out will be at the temperature of the cabin. Components of the vehicle blower: The blower mainly consists of the following six parts: motor, air filter, blower body, air chamber, base (also serving as the oil tank), and oil drip nozzle.
1
4
Share

What are the reasons for insufficient battery power in Volkswagen vehicles?

Volkswagen battery power insufficiency can be attributed to vehicle quality issues and personal usage problems. Personal usage problems: Short driving distances leading to insufficient battery charging, prolonged use of high-power electrical appliances, and electrical devices left on after the vehicle is locked. Vehicle quality issues: Battery quality problems resulting in insufficient power storage, short circuits or open circuits between battery poles, loose battery terminal clamps, vehicle body leakage. Regarding the issue of indicator lights being on, since the actual vehicle cannot be seen, an accurate fault diagnosis cannot be made. If this problem is not resolved through this answer, it is recommended to report it to the manufacturer and wait for their response and handling.
10
2
Share

What are the causes of oil leakage from the oil pan of a BMW 525 engine?

BMW 525 engine oil pan leakage can be caused by aging seals, insufficiently tightened oil pan screws, and severe external impact collisions. Poor sealing or aging of the gasket or sealing strip: Sealing strips exposed to high temperatures for extended periods can age, leading to cracking, which makes oil leakage a common occurrence. Insufficiently tightened oil pan screws: If the oil pan screws are not tightened sufficiently, the seal between the engine block and the oil pan deteriorates, resulting in oil leakage from the oil pan. Severe external impact collisions: After a severe external impact collision, the sealing performance of the oil pan may degrade or the pan may crack, leading to oil leakage.
20
2
Share

Why does the Subaru Outback key light stay on?

Subaru Outback key light stays on due to an anti-theft system malfunction. Fuel warning light: When this indicator light stays on, it indicates low fuel level and it's best to refuel promptly. During vehicle startup when the system performs self-check, this light will illuminate briefly before turning off. To preserve fuel pump lifespan, refueling should ideally occur before the fuel warning light activates. Door open indicator: If any door isn't properly closed, the corresponding indicator light on the display will illuminate. Seatbelt indicator: The seatbelt indicator on the car dashboard shows whether seatbelts are locked. When illuminated, it means seatbelts aren't properly fastened. Some models will emit warning sounds. The indicator automatically turns off when seatbelts are properly fastened.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.