Where is the air conditioning filter located in the Venucia T70?

1 Answers
McLandon
07/29/25 9:40pm
Venucia T70's air conditioning filter is located beside the left leg of the front passenger seat. The air conditioning filter is an important component in the car's air conditioning system and requires regular replacement. Most vehicles need to replace it every 10,000 kilometers. The Venucia T70 is the first SUV meticulously crafted by the Dongfeng Venucia brand. It measures 4542mm in length, 1786mm in width, and 1642mm in height, with a wheelbase of 2630mm, and features a front-engine, front-wheel-drive layout. In terms of configuration, the Venucia T70 is equipped with an efficient electronic power steering system, offering reliable and comfortable driving control. It also boasts exclusive smart features in its class, such as a 3D panoramic monitoring imaging system and speed-sensitive volume adjustment.
Was this review help?
14
1
Share
More Forum Discussions

Does long-term non-use of the sunroof have any impact?

If the sunroof is not used for a long time, proper maintenance should be performed to prevent the rubber seal from aging and causing water leakage. It is advisable to frequently use the sunroof's sliding mechanism to maintain its lubrication and flexibility. Hazards of clogged sunroof drainage outlets: If the drainage holes in the four corners are blocked, accumulated water cannot drain properly and may seep into the interior. In severe cases, water may flow along the roof to the sunroof motor inside the vehicle. Once powered on, the sunroof motor is prone to short-circuiting and burning out. Methods for cleaning clogged sunroof drainage outlets: Initial blockages usually occur at the entrance of the drainage holes, which can be easily seen and cleaned by opening the sunroof. Over time, debris may enter the drainage hose and move further inside, making it more difficult to clear. In such cases, it is best to visit a 4S shop for professional cleaning by a technician.
19
5
Share

What is the top speed of a twin-cylinder water-cooled 250cc motorcycle?

The top speed of a twin-cylinder water-cooled 250cc motorcycle can reach 164km/h. Appearance: The overall body design of this motorcycle is quite in line with current mainstream trends, featuring a muscular style that looks very robust. The entire body also adopts a multi-angular design, giving it a strong muscular appearance. Body Features: The headlight design of this motorcycle bears some resemblance to that of the CFMoto NK or KTM models. All lighting systems use the currently mainstream full LED setup, and an adjustable lens is added below the headlight, delivering excellent brightness performance. Power Specifications: The maximum power of this engine is 23.5kW at 11000rpm, with a maximum torque of 22N.m at 10000rpm.
16
4
Share

What is the difference between GLE and ML?

There is no difference between ML and GLE. The Mercedes-Benz GLE is the successor model to the Mercedes-Benz ML. Relevant information is as follows: 1. The Mercedes-Benz GLE is positioned as a mid-to-large-size SUV. Its body dimensions are 4930mm in length, 1950mm in width, and 1787mm in height, with a wheelbase of 2995mm. Some ML and GLE models have dimensions of 4941mm in length, 2018mm in width, and 1782mm in height. 2. In terms of power, there are two options: one is equipped with a 2.0-liter inline 4-cylinder turbocharged engine, paired with a 9-speed automatic transmission, delivering a maximum power of 190KW and a maximum torque of 370Nm. The other is equipped with a 2.0-liter inline 6-cylinder turbocharged engine, paired with a 9-speed automatic transmission, delivering a maximum power of 270KW and a maximum torque of 500Nm. The driving mode for all models is full-time four-wheel drive, and the fuel supply method is direct injection.
3
0
Share

What is the tire size of the Highlander?

The tire model size of the Highlander is 245/55-R19. Below is relevant information about tire specifications: 1. Tire specifications are commonly represented by a set of numbers, where the first number indicates the tire section width, and the latter denotes the rim diameter in inches. For example, 165/70-R14 represents a radial tire with a section width of 165 millimeters, an aspect ratio of 70, and a rim diameter of 14 inches. Some tires may include additional letters or symbols with special meanings: "X" indicates a high-pressure tire; "C" denotes a reinforced type; "B" represents a bias-ply tire; and "-" signifies a low-pressure tire. 2. M and S are abbreviations for Mud and Snow in English, indicating that the tire is suitable for use on snowy and muddy roads. Some tires have arrows or the word OUTER-SIDE marked on the sidewall, indicating the tire's rotation direction. If a small umbrella symbol is depicted on the sidewall, it means the tire is suitable for driving in rainy or slippery conditions.
6
1
Share

Why is there abnormal noise when driving?

Driving with abnormal noise can be caused by the following reasons: 1. The engine temperature is too low. When the car is cold-started, the engine temperature is too low for it to work properly, which is a normal phenomenon. Just wait a while until the engine temperature rises to a normal level. 2. The car's three-way catalytic converter expands due to heat. If there is abnormal noise when the car is just started, but it disappears after a while, it is caused by the expansion of the three-way catalytic converter due to heat, which is also a normal phenomenon and does not need attention. 3. Transmission failure. The internal gears of the transmission rub against each other, causing abnormal noise. This situation is more complicated and requires professionals at a repair shop or 4S store to inspect it. 4. Wear of the engine belt or chain. Wear of the engine belt or chain causes friction when the vehicle is started or idling, resulting in abnormal noise. For safety reasons, it is recommended to directly replace the engine belt or chain.
13
4
Share

What is a Joint Venture Car?

Joint venture cars refer to projects established through collaboration between Chinese and foreign investors. Below is an introduction to the investment methods of joint venture cars: 1. The Chinese side provides land and factory usage rights, as well as capital. 2. Foreign investors contribute brands, technology, capital, and talent. Below is extended information on the differences between domestic cars and joint venture cars: 1. Price: Due to core technologies being held by foreign companies, joint venture cars are often more expensive. 2. Investment method: Domestic cars are designed and manufactured entirely by Chinese entities; joint venture cars involve Chinese parties providing land, factory usage rights, and capital, while foreign investors contribute brands, technology, etc., to jointly manufacture the vehicles. 3. Brand: Domestic cars are self-owned brands; joint venture cars are produced through Sino-foreign collaborations.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.