Where is the air conditioning filter located in the Roewe 550?

1 Answers
LaDaisy
07/25/25 9:36am
The air conditioning filter in the Roewe 550 is located beneath the front windshield. Below are the steps for its replacement: 1. Open the engine hood after the vehicle has cooled down; 2. Unscrew the bolts in the engine compartment and detach the nearby clips; 3. Remove the old air conditioning filter for replacement. Additional information: 1. The Roewe 550 is a compact car with body dimensions of: length 4648mm, width 1827mm, height 1483mm, and a wheelbase of 2705mm. 2. The Roewe 550 is equipped with a 1.8L naturally aspirated engine, delivering a maximum power of 98kW at 6000rpm and a maximum torque of 170Nm.
Was this review help?
18
0
Share
More Forum Discussions

What cars are Cerato?

Cerato is available in the market with two engine displacements: 1.6L and 1.8L. Below is some extended information about the Cerato series. 1. The Cerato's center console design appears very simple, with reasonably arranged functions that allow drivers to quickly familiarize themselves without needing an operation manual. 2. The Cerato is equipped with an engine featuring CVT technology. After recalibration, it achieves a maximum output power of 82kw at 6000rpm and a maximum output torque of 145Nm at 4500rpm. 3. The Cerato shares the same wheelbase as the Elantra, both at 2610 millimeters, but the overall length of the Cerato is nearly 65 millimeters shorter than the Elantra, resulting in a slightly smaller trunk volume for the Cerato compared to the Elantra.
15
3
Share

How to Legally Apply Stickers on a Car?

About the regulations related to car stickers are as follows: 1. Special colors cannot be used: Since the red color dedicated to firefighting, the yellow color dedicated to engineering rescue, and the upper white and lower blue color scheme dedicated to national administrative law enforcement are all special colors for special vehicles, ordinary vehicles are not allowed to use them. 2. Must not affect safety: The logos sprayed or pasted on the car, or advertisements on the body, must not affect safe driving. 3. Area not exceeding 30%: The area of car stickers must not exceed 30%. If it exceeds 30%, an application for record filing should be made to the traffic management department.
4
0
Share

What is the ground clearance of the Lavida generally?

The ground clearance of the Lavida is generally 110mm. The greater the ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven terrain, but it also results in a higher center of gravity, which reduces stability. The Lavida uses a MacPherson strut independent suspension for the front suspension, while the rear suspension is a torsion beam non-independent suspension. The Lavida is a sedan produced by Shanghai Volkswagen, with dimensions of 4605mm in length, 1765mm in width, and 1460mm in height, and a wheelbase of 2610mm. Depending on the model configuration, the Lavida is equipped with features such as ACC adaptive cruise control, an 8-inch central control screen, automatic dual-zone air conditioning, air filtration, seat heating, electronic parking brake, and auto hold.
9
4
Share

Differences Between Manned and Unmanned Railway Crossings?

Manned railway crossing road sign: Its shape is an equilateral triangle with the apex pointing upwards; its color is yellow with black borders and black patterns, featuring a fence symbol inside. Unmanned railway crossing sign: It is a triangular sign with a yellow background, black borders, and black patterns, distinguished by a train with a smoking chimney inside. Below are other railway signs: 1. Kilometer markers and half-kilometer markers: Placed at every full kilometer and half-kilometer point along a route from the starting point. The primary function of kilometer markers is to precisely indicate the location of the route. For example, when track inspectors patrol and identify issues, they can record and report the exact position based on the kilometer and half-kilometer markers, facilitating timely repairs by maintenance teams. 2. Curve markers: Positioned at the midpoint of a curve on the route, indicating the center mileage of the curve, radius, and the lengths of the curve and transition curve. Circular curve and transition curve start/end markers: Placed at points where a straight line transitions into a transition curve, a transition curve into a circular curve, a circular curve into a transition curve, and a transition curve back into a straight line.
10
1
Share

How many times do you need to signal during Subject 2 driving test?

There are 3 instances where turn signals are required in Subject 2: exiting parallel parking (left turn signal), making a 90-degree turn (left turn signal), and stopping at the slope starting point (right turn signal). Penalties for incorrect turn signal usage are as follows: Failure to use or incorrect use of turn signals before starting, turning, changing lanes, overtaking, or parking will deduct 10 points. If the turn signal is activated for less than 3 seconds before starting, turning, changing lanes, overtaking, or parking, 10 points will be deducted. The full score for Subject 2 is 100 points, with evaluation criteria set for disqualification, 20-point deduction, 10-point deduction, and 5-point deduction. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles C1 and C2 include reversing into a garage, parallel parking, slope starting and stopping (canceled for C2), 90-degree turns, and curve driving (commonly known as S-curve) as mandatory items (some regions also include a sixth item: highway toll card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include stake test, slope starting and stopping, parallel parking, single-plank bridge crossing, curve driving, 90-degree turns, limited-width gate passing, continuous obstacle passing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp mountain turns, tunnels, rain (fog) conditions, slippery roads, and emergency handling.
7
0
Share

How to Replace the Battery in a Hyundai Elantra Key Fob?

Method for replacing the Hyundai Elantra key fob battery: First, remove the mechanical key. You will notice a seam in the middle of the plastic casing. Use a flathead screwdriver to pry it open, then take out the old battery and replace it with a new one, paying attention to the correct orientation of the positive and negative terminals. After replacing the battery, firmly press the two halves of the key fob back together until they snap into place. In terms of powertrain, the Volkswagen Elantra is equipped with a 1.6L engine and a 1.8L Nu engine. The 1.6L engine delivers a maximum power output of 127 horsepower and a maximum torque of 155Nm, while the 1.8L engine features the new Nu engine with a maximum power of 145 horsepower and a maximum torque of 175Nm.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.