Where is the air conditioning filter located in the Renault Koleos?

2 Answers
DelIsla
07/29/25 12:58am
Renault Koleos air conditioning filter is located under the engine hood, inside the right front black box of the engine. The replacement method is: open the engine hood, there is a black box on the right front of the engine with 2 clips, open the clips to see the air conditioning filter inside, take out the old air conditioning filter and replace it with a new one, then reattach the 2 clips. Taking the 2019 Renault Koleos as an example, it is a compact SUV with body dimensions of: length 4672mm, width 1843mm, height 1685mm, wheelbase 2705mm, front track 1596mm, and rear track 1586mm.
Was this review help?
14
1
Share
LaValentina
08/12/25 5:08am
I've been driving a Renault Koleos for several years and know the location of the cabin air filter very well—it's inside the glove compartment on the passenger side, without needing to dismantle the entire dashboard. After opening the glove box, simply push it inward or release a few clips to directly access the filter housing, making replacement quite convenient. I change it every 12 months, roughly every 20,000 kilometers, as air quality impacts health. A new filter effectively traps pollen, dust, and external pollutants, keeping the cabin air fresher. During summer road trips, odors are reduced, and the AC performs significantly better. The replacement process is straightforward—affordable filters bought online take just about 15 minutes, but be careful not to force plastic parts as they're fragile. Regular changes also extend the AC system's lifespan, save on repair costs, and once it becomes a habit, driving feels more comfortable and worry-free.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

Is there an air vent under the Vezel's seat?

There is an air vent under the Vezel's seat. Since the interior becomes an enclosed space when the air conditioning is turned on, the vent under the seat helps to circulate the airflow inside the car more effectively. The normal temperature range for car air conditioning vents is between 10 to 15 degrees Celsius. The temperature of the air from the vents is influenced by factors such as ambient temperature and the volume of airflow. Generally, as long as the temperature difference between the intake and outlet vents is more than 10 degrees, it is considered acceptable. If the air from the vents feels too warm, the first step is to check if the water temperature indicator is signaling an alarm and whether components like the fan and condenser are functioning properly. Regular cleaning of the car's air conditioning vents is crucial. To avoid inhaling more dust directly from the vents, the simplest method is to drive the car to an open area, open all the doors, and set the fan to the highest setting for a few minutes. Afterward, use a specialized cleaner to clean the air conditioning vents. Generally, the air conditioning filter should be replaced every 10,000 kilometers. It is usually replaced after spring because the filter is used more frequently during winter and summer. If not replaced for a long time, it can affect the efficiency of the air conditioning and the health of the passengers. The air conditioning filter is an important component of the car's air conditioning system and requires regular replacement. In most cars, the air conditioning filter is located behind the glove compartment on the passenger side. To replace it, simply remove the glove compartment.
12
1
Share

How much engine oil should be added to a BMW 1.5t engine?

Generally, a BMW 1.5t engine requires 4.5 liters of engine oil. When adding oil, ensure that the oil level is between the minimum and maximum marks on the dipstick. The oil level should not be below the minimum mark or above the maximum mark, as this may affect the normal operation of the engine. The BMW 1.5t three-cylinder engine can use 5W-40 or 0W-40 grade engine oil. Engine oil, also known as engine lubricant, serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. Method for adding engine oil: Park the car on a level surface. Slowly unscrew the oil filler cap in reverse and proceed with the normal oil change procedure. When adding oil, ensure that the oil level remains slightly below the mark on the dipstick. When reinstalling the oil filler cap, lubricate the cap opening with oil from the dipstick, then tighten it smoothly in the clockwise direction until properly secured. Method for selecting engine oil: Choose engine oil based on the requirements of the engine. Do not use high-grade oil in a lower-performance engine or low-grade oil in a high-performance engine. Always select oil that matches the engine specifications. Multi-grade oil is recommended, as it offers advantages such as fuel efficiency, long service life, and high performance, providing better protection for the engine. Select oil viscosity based on the engine's operating conditions. If the engine is in good condition and the seasonal temperature is low, use oil with lower viscosity. If the engine is severely worn and the seasonal temperature is high, opt for oil with higher viscosity.
1
4
Share

How to Bleed the Air from an Audi A4 Radiator?

There is a bleed screw inside the cabin. First, open the bleed screw and continuously add water to the radiator. Bubbles will emerge from the bleed screw until they disappear, indicating that the radiator is fully filled with water. The method for adding water to the radiator is as follows: 1. Open the hood; the radiator is located on the right side. To open the hood, push the hood latch inward. Then, open the radiator cap and add water to the appropriate level. Make sure the water you add is clean. Finally, close the radiator cap and shut the hood. 2. The car radiator, also known as the heat exchanger, is a key component of the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket to circulate, thereby regulating the temperature. It is an integral part of the car engine.
11
3
Share

What is the driving method for the Honda XRV?

Honda XRV driving steps are as follows: 1. After the driver sits in the driver's seat, press the one-touch start button: At this time, the ACC light turns on, and then press the one-touch start button once more, at which point the vehicle performs a self-check. 2. Press the one-touch start button while stepping on the brake to ignite and start the engine: After gently stepping on the brake, press the one-touch start button again. 3. Keep stepping on the brake, shift to D gear, and release the handbrake: For the electronic handbrake, simply press the button briefly. 4. Slowly release the foot brake, gently press the accelerator, and the start is complete: When starting, allow the car to warm up slowly, and avoid directly increasing the speed to above 4th gear.
6
0
Share

How to Check the Remaining Fuel Level in a Sagitar?

To check the remaining fuel level in a Sagitar, follow these steps: 1. The Sagitar's dashboard features a fuel gauge that displays the remaining fuel level once the vehicle is started. The Sagitar is a compact car under the Volkswagen brand. 2. In the new Sagitar models, the remaining fuel level is displayed at the bottom right of the digital dashboard. The fuel tank capacity of the Volkswagen Sagitar is 50L, while the older models have a 55L fuel tank. 3. The Sagitar's fuel gauge uses the letters E and F to indicate fuel levels: E stands for low fuel, and F indicates sufficient fuel. Additionally, there are scale lines to estimate the fuel quantity. The fuel gauge consists of a stabilized fuel level indicator, a fuel level sensor, and an alarm system. The low fuel alarm activates when the fuel in the tank falls below a certain threshold, alerting the driver to refuel.
4
2
Share

How many cylinders does the 2019 Sagitar engine have?

2019 Sagitar is equipped with a four-cylinder engine. This model comes with two engine options: a 1.2-liter turbocharged engine and a 1.4-liter turbocharged engine, both of which are four-cylinder. The 1.2-liter turbocharged engine delivers 116 horsepower and a maximum torque of 175 Nm. This engine can output its maximum power at 5,000 to 6,000 rpm and its maximum torque at 1,500 to 4,500 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission. The 1.4-liter turbocharged engine produces 150 horsepower and a maximum torque of 250 Nm. It can output its maximum power at 5,000 to 6,000 rpm and its maximum torque at 1,750 to 3,000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. In terms of configuration, the entire lineup comes standard with an electronic parking system. Higher-end models offer a 10-color ambient lighting system that can switch between economy, comfort, and sport modes. For active safety, the top and sub-top trims are equipped with an advanced pre-collision system, with optional lane-keeping and blind-spot monitoring features. ACC adaptive cruise control is also available as an option. For interior design, the cabin features a combination of soft-touch materials and piano black panels, supports Apple CarPlay connectivity, and has touch-sensitive air conditioning controls. Mid- and lower-trim models come with traditional mechanical gauge clusters.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.