Where is the air conditioning filter located in the Polo?

1 Answers
DanteRose
07/29/25 2:42pm
The air conditioning filter in the Polo is located beneath the front passenger glove compartment. Installation and removal method: 1. There is a black plastic panel in the upper part of the passenger footwell with two retractable clips; bend these to remove the panel. 2. Disconnect the negative terminal of the battery, then remove the body control module and its mounting bracket. 3. Remove the panel on the left side of the passenger footwell by unscrewing the four screws securing it. The Polo is a compact car produced by SAIC Volkswagen, with dimensions of 4053 mm in length, 1740 mm in width, and 1449 mm in height, and a wheelbase of 2564 mm. In terms of power, the Polo is equipped with a naturally aspirated engine delivering a maximum horsepower of 113 hp, a maximum torque of 145 Nm, and a maximum power output of 83 kW.
Was this review help?
11
4
Share
More Forum Discussions

What does BEV mean?

BEV stands for Battery Electric Vehicle, which relies on an electric motor for propulsion. The motor is powered by a large battery pack located in the vehicle's chassis. Since the electric motor operates without excessive vibration or noise, BEVs offer excellent cabin quietness during driving. Maintenance methods for BEVs include: 1. Inspecting paint damage, light functionality, wiper blade aging, tire wear, and tire pressure; 2. Replacing the cabin air filter; 3. Checking and replenishing coolant, brake fluid, and windshield washer fluid; 4. Inspecting power system connectors and wiring insulation protection.
9
4
Share

Why Walk Around the Vehicle Counterclockwise?

Safety inspection before getting into the car. The method of safety inspection is to walk around the vehicle counterclockwise for inspection. The content of the safety inspection includes two parts: observing whether there are pedestrians and obstacles around the vehicle, and checking the technical condition of the vehicle tires, whether there is any abnormality on the body surface, and whether there are any drip marks on the road surface under the vehicle. Additional information: Discovering foreign objects to avoid financial loss. No matter where the car is parked, it is impossible to fully predict what might happen. For example, there might be stones in a corner in front of the car, or sharp objects such as nails. Therefore, walking around the vehicle allows observation of the surrounding situation to avoid unnecessary losses.
14
3
Share

What are the techniques for operating the clutch in Subject 2?

Techniques for operating the clutch in Subject 2: 1. Adjust the seat: Before pressing the clutch, adjust the seat to leave a certain curvature in your legs. Beginners can have a slightly larger curvature to better apply force when pressing the clutch. 2. Find the fulcrum: When pressing the clutch, use your heel as the fulcrum and control the pedal with the ball of your foot. You can press it a few times to find the appropriate fulcrum position (remember, the fulcrum must not leave the ground). 3. Press quickly and release slowly: Pressing the clutch is usually done for deceleration or gear shifting, so it should be quick. Releasing the clutch is typically done after shifting to prepare for accelerating, so it should be slow to avoid stalling the engine.
14
3
Share

How Much Power Does 1.5T Equivalent to in Liters?

Mainstream 1.5T engines generally deliver power levels comparable to 2.0L naturally aspirated engines. Here are the relevant details: 1. Engine Displacement: A 1.5L displacement refers to the cylinder volume, which is the sum of the volume from the piston's top dead center to bottom dead center plus the combustion chamber volume. 2. Turbocharging: The 'T' stands for Turbo, indicating an engine equipped with a turbocharging device. The turbocharger modifies the engine's air intake, enabling more complete fuel combustion in the cylinders, thereby increasing power output. Compared to engines of the same displacement, turbocharged engines offer advantages such as greater power output, lower fuel consumption, and better environmental performance.
18
2
Share

What does 'off' mean inside a car?

In a car, 'off' refers to the button that turns off the vehicle stability control system, which is enabled by default. Pressing and holding this button can deactivate the system. The vehicle stability control system is a general term for systems or programs designed to enhance the vehicle's handling performance while effectively preventing loss of control when the car reaches its dynamic limits, thereby improving the vehicle's safety and handling. The system analyzes information about the vehicle's driving status received from various sensors and then sends correction commands to systems like ABS and EBD to help maintain dynamic balance. This system ensures excellent stability under various conditions, with particularly noticeable effects in cases of oversteering or understeering.
9
3
Share

What does EcoBoost mean?

EcoBoost is Ford's EcoBoost engine, which builds upon traditional gasoline engines by incorporating three key technological advantages: direct fuel injection, turbocharging, and twin independent variable camshaft timing. This not only ensures power output but also optimizes fuel economy. The core technology of Ford's EcoBoost engine is a high-pressure direct fuel injection system, capable of injecting precisely measured small amounts of fuel into each cylinder at pressures up to 200 bar. The size of the fuel droplets is typically less than 0.02 millimeters, equivalent to one-fifth the diameter of a human hair. Ford's EcoBoost four-cylinder engine features independent variable camshaft timing systems on both the intake and exhaust camshafts, optimizing airflow within the cylinders at different engine speeds.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.