Where is the air conditioning filter located in the Peugeot 4008?

2 Answers
DeCharlie
07/29/25 2:45pm
The air conditioning filter element of the Peugeot 4008 is located in the glove box. The specific steps are as follows: 1. There is a black plastic panel above the passenger footwell with two retractable clips. Remove the panel by releasing these clips. 2. Then, disconnect the negative terminal of the battery, remove the body control module, and detach the mounting bracket for the body control module (two 12mm nuts). 3. Next, remove the panel on the left side of the passenger footwell, which is secured by four screws. Once removed, you can access the air conditioning filter. The functions of the air conditioning filter are: 1. To filter the air entering the cabin from the outside, improving air cleanliness. The filter typically removes impurities such as tiny particles, pollen, bacteria, industrial exhaust, and dust. 2. The air conditioning filter prevents these substances from entering the air conditioning system, thereby protecting the system and providing a good air environment for passengers. It also helps maintain passenger health and prevents window fogging.
Was this review help?
15
1
Share
OLila
08/13/25 7:14am
Locating the cabin air filter on the Peugeot 4008 is quite straightforward – I've changed it several times myself with ease. The filter is typically situated behind the glove compartment on the passenger side. After opening the glove box, you'll notice a small panel or clips on the inner side. Usually, no tools are needed; just gently push or unclip it to reveal the hidden filter housing. When performing this task, I always clean away any dust first before inserting the new filter in the correct orientation – the whole process takes about 10 minutes. It's recommended to replace the filter every six months or according to seasonal changes to maintain fresh cabin air. Given the heavy pollution during city traffic jams, regular replacements safeguard health and prevent musty odors when using the AC. Remember to purchase OEM or compatible filters and ensure the arrow direction is correctly aligned during installation.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

At what temperature does the Haval H9's cooling fan activate?

Generally, the engine radiator cooling fan activates at around 90 degrees Celsius. Specific details are as follows: Engine Radiator Cooling Fan: Typically, the engine radiator cooling fan starts operating at approximately 90 degrees Celsius. When the temperature reaches around 105 degrees, the fan switches to high-speed mode. The radiator fan automatically activates only after the vehicle's engine has been running for a certain period, causing the temperature to rise and the engine coolant temperature to increase. Methods to Address Overheating Engine Coolant: If overheating is caused by insufficient coolant, you need to add water. However, to prevent engine damage, do not add water immediately. Usually, you should first open the car's hood, then remove the engine cover to allow ventilation and heat dissipation. Only add water after the coolant temperature has dropped. If the water pump malfunctions causing overheating, it might be due to seized bearings or damaged impeller blades. While bearing seizure is less likely, replacing a broken impeller should suffice. If you notice the engine overheating while the electric fan isn't running, this indicates either a blown fuse or a faulty thermostat switch. In this case, remember not to turn off the engine immediately. Instead, open the hood first and use cool water to rapidly cool down the radiator. Most importantly, do not attempt to open the radiator cap immediately, as escaping hot steam could cause severe burns.
9
4
Share

Which Consumes More Fuel: Idling or Driving?

Idling consumes more fuel than normal driving. In idle mode, the engine needs to maintain its rotation speed to prevent stalling. Typically, a car's idle speed is set at 800 rpm, requiring 1600 fuel injections per minute. During idling, the engine must remain ready for the driver's acceleration operation. When starting the car from a standstill, the engine needs to produce more torque than during normal driving. Due to the inherent programming of the car's electronic fuel injection system, the fuel injector dispenses slightly more fuel per cycle during idling compared to normal driving. The higher engine speed during idling results in increased fuel consumption. Idle state refers to a condition where the engine runs without load. When the accelerator pedal is fully released while the engine is running, it enters idle mode. Adjusting the idle speed should avoid sudden fluctuations, as this can cause premature engine wear. It's best to have the idle speed adjusted at an automotive service center. Idling means the engine operates without external load, only overcoming internal friction resistance, and does not output power. The minimum stable engine speed under these conditions is called idle speed, which is one of the five basic engine operating conditions. For a well-functioning engine, the idle speed typically ranges between 550 to 800 revolutions per minute.
20
1
Share

What Causes the Audi Lights to Flash?

Audi lights flashing may occur due to the following reasons: Door Not Fully Closed: After the vehicle enters the anti-theft mode, if a door is not fully closed, it will trigger the anti-theft system alarm and activate the hazard lights to alert the owner. Solution: Use the car key to deactivate the anti-theft system, open the door, and then close it again. The owner can perform this operation themselves. Presence of People or Animals Inside the Vehicle: After the vehicle is locked, if passengers or pets remain inside the cabin, the weight sensors in the seats may be triggered, activating the vehicle's anti-theft system alarm and causing the hazard lights to flash. Solution: The owner can use the car key to deactivate the vehicle's anti-theft system. If the vehicle is parked for an extended period, do not leave passengers or pets inside to prevent triggering the anti-theft system. Damaged Car Key: If the internal chip of the car key is damaged, the keyless entry function of the vehicle will fail. In this case, when the owner uses the mechanical key to open the door, the anti-theft system may mistakenly interpret this as an illegal intrusion, triggering the alarm. Solution: Use the spare car key to deactivate the vehicle's anti-theft system, then visit an authorized 4S dealership to inspect the internal chip of the damaged car key.
1
4
Share

What is the reason for the cigarette lighter in the Baojun 530 not working?

Car cigarette lighter not working may be due to a blown fuse or loose spring clip. Relevant information about car cigarette lighters is as follows: Introduction to car cigarette lighters: The cigarette lighter is a device in a car. In the traditional sense, the cigarette lighter draws power from the car's electrical system to heat a metal heating element (such as a heating plate or wire) to provide a flame for lighting cigarettes. With the development of automobiles and changing user needs, the cigarette lighter socket can often be configured with a car inverter to charge mobile electronic devices, etc. The central elastic contact in the socket is the positive pole, while the side clips are the negative poles. The power source is directly connected to the car battery, with the same current and power as the battery. Maintenance methods for car cigarette lighters: Replace the fuse; adjust the angle of the spring clip to ensure it can lock the cigarette lighter in place and allow it to heat up properly. Avoid making the angle too large, as it may affect the insertion and removal of the lighter. Structural damage to the cigarette lighter itself is rare, so replacement is usually unnecessary unless the spring clip is broken, in which case the lighter socket must be replaced.
4
1
Share

Where to Get a Physical Exam for Driver's License Renewal?

For driver's license renewal upon expiration, the physical examination must be conducted at a county-level or higher medical institution, or a military medical institution at or above the regimental level. Important Notes for License Renewal: Before renewal, all traffic violations must be addressed, including paying fines and clearing penalty points. Otherwise, the vehicle management office will not issue a new license. If a driver accumulates 12 penalty points in any scoring cycle during the license's validity period, a long-term license will not be renewed. If the license has been expired for less than one year, it can still be renewed through the normal procedure. If the license has been expired for more than one year but less than three years, it will be revoked, but can be reinstated by passing the subject one exam. If the license has been expired for more than three years, it will become invalid and cannot be renewed. License Renewal Process: You can choose between processing at the vehicle management office window or online. Both methods are relatively simple and quick, and the choice depends on your needs. You can complete the online license renewal service by logging into the Comprehensive Traffic Safety Service Management Platform. Follow the operation guide to finish the online renewal process.
16
2
Share

What is the top speed of the Aprilia GPR150?

The top speed of the Aprilia GPR150 is 130km/h. This motorcycle is equipped with a single-cylinder, four-valve, liquid-cooled engine with a compression ratio of 12:1 and an actual displacement of 149.2ml. It delivers a maximum power of 13.3KW at 9750rpm and a maximum torque of 14N.m at 7500rpm, paired with an electronic fuel injection system and a six-speed transmission. Aprilia's pure sports bike is the RS4125, which is positioned as an entry-level track bike with daily short-distance commuting capabilities. The GPR150 is an upgraded version of the GPR125 with increased displacement, offering not only enhanced performance but also some configuration improvements. The GPR150 is still assembled and produced domestically, giving it a slight price advantage over the fully imported Yamaha R15. The exterior of the Aprilia GPR150 continues the family design language, with the "a" element still present on both sides of the body. Italian flag elements have been added from the front face to the side covers. The decals cleverly utilize the concept of "lines" to outline the bike's elegant curves, with the red section extending from the front to the fuel tank complementing the rear seat cushion. The refined design highlights its uniqueness. The decals on the front cowl are cleaner and sharper, showcasing its sporty DNA throughout.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.