Where is the air conditioning filter located in the new Santana?

1 Answers
JordanDella
07/29/25 7:24pm
The air conditioning filter of the new Santana is located inside the glove box in front of the front passenger seat. You can see it by removing the glove box. Here is an introduction to the new Santana: 1. The recommended replacement cycle for the air conditioning filter in the Volkswagen New Santana is 1 year or 20,000 kilometers. If the air quality in the vehicle's area is particularly poor, it is advisable for the car owner to replace the air filter in advance to ensure that the interior always maintains fresh air. When replacing the air conditioning filter, please note that there is an arrow indication on the filter. During installation, align it with the direction indicated by the arrow and make sure not to install it backwards. If installed incorrectly, the air conditioning filter will not function properly. 2. Without the air conditioning filter, these particles can enter the cabin, not only polluting the car's air conditioning system and reducing the performance of the cooling system, but also causing allergic reactions, lung damage, and irritation from ozone exposure, leading to mood disturbances and unpleasant odors, all of which can affect driving safety.
Was this review help?
2
4
Share
More Forum Discussions

What is the fuel consumption of the Jianghuai Refine M5?

Jianghuai Refine M5 has a fuel consumption of 10-12L/100km. Below is a detailed introduction about the vehicle's fuel consumption per 100 kilometers: 1. Overview: The fuel consumption per 100 kilometers refers to the amount of fuel consumed by a vehicle traveling a distance of 100 kilometers on the road at a certain speed. It is a theoretical indicator for vehicles. The fuel consumption per 100 kilometers is a value measured by manufacturers in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated as the theoretical experimental fuel consumption data for the model when traveling at specified speeds. 2. Others: Since most vehicles approach their economical speed at 90 km/h, the theoretical fuel consumption published by most manufacturers is usually the fuel consumption per 100 kilometers at 90 km/h.
19
5
Share

What are the reasons for BYD Surui not starting?

It may be due to the engine control unit losing network communication or a power supply failure in the engine control unit. Below are the relevant details: 1, Check the electrical circuit: Inspect whether the spark plugs are firing normally and if there is any leakage. Check if the high-voltage wires have high-voltage sparks, and for those with ignition coils, verify if the ignition coils are functioning properly. 2, Check the fuel system: Open the engine's fuel inlet pipe and turn the key to see if fuel comes out. If no fuel comes out, it might be due to a clogged fuel line or a non-operational electric fuel pump. Another rare possibility is the engine control unit being locked due to the anti-theft system activation. 3, Starter or wiring connection issues: These can prevent the car from starting. Additionally, if the battery's starting voltage is below 9.5V, it may also cause the car not to start.
5
5
Share

Is Baojun a Domestic Brand?

Baojun is a domestic brand, an independent automobile brand established by SAIC-GM-Wuling in 2010. Baojun has successively launched models such as the Baojun 630 and Baojun 610 sedans, the Baojun 510 and Baojun 530 SUVs, the Baojun 730 and Baojun 360 MPVs, the Baojun 310 and Baojun 310W compact cars, as well as the Baojun E100 and Baojun E200 new energy electric vehicles. Baojun Interior Configuration: The dashboard features extensive soft leather wrapping with red stitching details; equipped with an LCD instrument panel/multifunction steering wheel/cruise control/touchscreen infotainment system/panoramic sunroof/automatic air conditioning, etc. In terms of storage space, the Baojun 510 offers ample storage compartments throughout the cabin, though the center armrest compartment is relatively small. For passenger space, a 174cm-tall individual will not feel cramped whether seated in the front or rear, which is quite sufficient. The rear seats also provide adjustable backrest angles, allowing for a comfortable reclined position without compromising trunk space. Baojun Powertrain Configuration The new Baojun models are equipped with a 1.5T turbocharged direct-injection engine and a CVT transmission. The 1.5T turbocharged direct-injection engine incorporates advanced technologies such as Delphi's 350bar high-pressure direct injection, Honeywell's next-generation twin-scroll turbocharging, Mahle's continuously variable displacement oil pump, and BorgWarner's wide-angle mid-mounted VVT system. It delivers a maximum power output of 130kW. The turbocharger engages quickly at low engine speeds of 1000rpm, generating a peak torque of 290Nm, which is sustained across a broad rpm range of 1500-3500.
5
2
Share

What causes the Peugeot 307 car door to fail to lock?

Peugeot 307 remote control can not lock the door may be the problem of the lock itself, or the central control line problem, it is recommended to go to the repair shop for inspection. The precautions for Peugeot 307 remote control are as follows: 1. Choose a professional key matching institution for car keys: Professional key matching institutions have the manpower and resources to complete the task quickly, often within minutes, without the need to remove many car door locks, thus avoiding secondary damage to the original vehicle and doors. 2. Prevent the car remote control from getting damp, soaked in water, or dropped on hard ground: to avoid being destroyed or damaging the chip inside the key handle, which may lead to difficulty in starting the engine. 3. Avoid keeping the key inserted in the ignition switch lock cylinder for too long during maintenance: and avoid removing the battery from the remote control for an extended period, as these practices may cause the chip memory to be lost, rendering the remote control ineffective.
17
0
Share

What to Do If a Large Vehicle Blocks the Traffic Light and Causes You to Run a Red Light?

In general, if a motor vehicle is photographed following a large vehicle, it is usually because the driver rushed through the intersection when the signal was changing. This behavior can only be penalized as running a red light. However, if it is confirmed that the signal light was blocked by the large vehicle and thus not visible, you can apply for a review after being penalized. Drivers should maintain sufficient visibility to see the traffic signals ahead and ensure a safe braking distance. Penalty points for running a red light: According to Article 2, Section 1, Clause 2 of the "Scoring Standards for Road Traffic Safety Violations," driving a motor vehicle in violation of traffic signal lights will result in a deduction of 6 points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings will result in a deduction of 3 points. How to check for running a red light: You can check for red light violations through the "Traffic Management 12123" app. After opening the app, log in using your ID card, then find and click on the "Violation Handling" option. Under "Violation Handling," you can see the current status of your vehicle. If there are any violations, the specific details will be displayed. You can also check by visiting the office halls of the traffic police departments in various cities and districts and using the touch query terminals. Alternatively, log in to the external service websites of the public security traffic management bureaus of various cities: locate the vehicle violation query section, enter your license plate number and vehicle engine number, and click "Query" to proceed.
11
2
Share

Should the Mercedes-Benz A-Class use 92 or 95 octane fuel?

The fuel tank capacity of the Mercedes-Benz A-Class is 43 liters, and the manufacturer recommends using 95 octane gasoline. For safety reasons, the engine must be turned off before refueling, and the fuel tank cap can be opened by pressing on one side without locking the car. Here are the precautions for refueling the Mercedes-Benz A-Class: 1. To prevent safety hazards, ensure the fuel nozzle is fully inserted into the tank. 2. The fuel tank cap should be closed until a clicking sound is heard to avoid accidents. 3. During refueling, it is not advisable to have passengers remain in the car. If someone must stay inside, ensure the doors are tightly closed and avoid using electronic devices. Static electricity is another important consideration when refueling. Before handling the fuel nozzle, discharge static electricity by touching a metal object. 4. Turn off all electronic devices during refueling to prevent fires or more severe disasters. 5. Do not create open flames while refueling to prevent fuel explosions. 6. When the fuel gauge shows less than 1/4 tank remaining, it's time to refuel.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.