Where is the air conditioning filter located in the new Qashqai?

2 Answers
VonMiguel
07/29/25 5:09pm
Nissan Qashqai air conditioning filter location is as follows: 1. Remove the decorative panel on the right side of the driver's seat, starting from top to bottom for easier access; 2. The replacement method is the same for both 08 and 10 models, with the white obstruction in the 10 model not affecting filter replacement. The filter cover is connected to gray sealing foam, featuring a handle in the middle. The bottom of the cover has a clip - simply hook it with your finger to detach the cover. 3. Once the cover is removed, you can pull out the air conditioning filter. Note: Filters have front and back orientations. While OEM filters are marked with front/back indicators, aftermarket filters typically have an extra thin material on the short edge of the frame. The correct installation direction is with this protruding material facing outward at the top. 4. Filter installation can be challenging due to the awkward position. You may bend the filter toward the front of the vehicle during insertion. After fully inserting, pull the filter back and forth a few times to ensure proper positioning. Finally, replace the cover to complete installation.
Was this review help?
1
3
Share
XavierLynn
08/14/25 7:32am
I just bought a new Nissan Qashqai not long ago and changed the cabin air filter myself. It's located behind the glove compartment on the passenger side, which is super easy to access. Just open the glove box door, gently press the clips on both sides to let it flip down or remove it completely, and you'll see a rectangular plastic cover. Lift it up and the filter is right inside. DIY replacement saves a ton of money - I bought one on Taobao for just tens of RMB, saving hundreds compared to dealership service. Remember to change it regularly; with Beijing's air quality, every 6 months is ideal. Otherwise, the AC will blow musty air and cooling efficiency drops. Pay attention to the directional arrow when installing - don't put it in backwards. Basic tools are enough, takes just minutes. Proper maintenance keeps your car's air fresh and healthy.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

How to activate the automatic handbrake on a Camry?

Mechanical handbrake, located on the left side of the gear lever, is engaged by lifting the handbrake lever and released to allow the vehicle to move. Electronic foot brake, located on the left side of the brake pedal, is engaged by pressing the brake with the left foot to stop the vehicle, and released by pressing and then lifting the foot. Electronic handbrake, located behind the gear lever, is engaged by lifting it with a finger when the vehicle is stationary, and released by pressing the brake pedal and then pressing the electronic handbrake button before starting the vehicle. Alternatively, it can be automatically released by lightly pressing the accelerator while wearing the seatbelt.
19
1
Share

What are the correct driving steps for an automatic transmission car?

The correct driving steps for an automatic transmission car: 1. Turn the ignition key to the second position (power mode) to allow the car's computer system to perform self-check for at least 6 seconds. 2. Press the foot brake and shift the gear from P to N. 3. Release the foot brake and turn the ignition key to start the engine. 4. When starting the car after prolonged parking, it's recommended to warm up the engine for 1-2 minutes while stationary. 5. Press the foot brake and shift the gear from N to D, then release the parking brake (for electronic parking brake, simply press the button briefly). 6. Gradually release the foot brake to start moving. 7. Apply the accelerator smoothly according to road conditions for safe driving.
2
1
Share

What Causes the Abnormal Noise After Installing Snow Tires?

The reasons for abnormal noise after installing snow tires include severely worn brake pads, damaged shock absorbers, deformed wheel hubs, tire wear, or damaged drive shafts. Causes: The vehicle's braking force will decrease when encountering objects like nails or stones. Solutions: Promptly replace the brake pads. If the wear on the left and right drive wheels is uneven, it is generally recommended to first install new tires on the non-driven wheels for some mileage. After the four tires have worn in, perform a cross rotation. For regular use, it is best to perform a cross rotation every 20,000 kilometers, as the driven wheels are dragged along and tend to wear unevenly compared to the drive wheels. Have a repair shop inspect further. Replace the wheel hub if necessary.
1
1
Share

What brand is Qoros?

Qoros is an independent automotive brand, which was founded in China. Qoros Auto is a joint venture company providing automotive products and services, headquartered in Changshu, Jiangsu. The models under the Qoros brand include: Qoros 3, Qoros 7, Qoros 5, Qoros 3 City SUV, and Model Young. Taking the Qoros 3 as an example: it is a compact car with a length, width, and height of 4627mm, 1839mm, and 1445mm respectively, and a wheelbase of 2702mm. In terms of power, the Qoros 3 is equipped with an L4 turbocharged engine, paired with a CVT continuously variable transmission, delivering a maximum power of 115kw and a maximum torque of 230nm.
16
4
Share

How to Playback Recorded Videos on Camry Dash Cam?

Remove the TF memory card from the dash cam, insert it into a card reader, and then connect it to a computer to access the recorded content. Connect the dash cam to a computer using a USB cable, and the computer will recognize the dash cam as a mass storage device. The dash cam is equipped with a display screen. You can playback videos directly on the dash cam. The general method is to first pause the recording, then press the "MODE" button. Locate the recorded video and click "OK" to play it. Press the MODE button to make a selection and click on the recorded video file.
14
3
Share

What causes the airbag warning light to illuminate on the dashboard?

The reasons for the airbag warning light illuminating on the dashboard: 1. Foreign objects around the airbag sensor wiring harness, especially metal debris causing a short circuit, leading to false warnings. 2. The warning light may illuminate due to erroneous data reported by the car's ECU sensor. 3. If the warning light comes on without reason, it is likely caused by the vehicle being parked in a humid environment for a long time or moisture in the wiring connectors during car washing, resulting in a short circuit. 4. A fault in the airbag itself, mostly caused by loose connectors. However, if the USB also fails, the fault in the airbag itself can be largely ruled out.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.