Where is the air conditioning filter located in the Mitsubishi Lancer?

1 Answers
OStephen
07/29/25 8:01pm
The air conditioning filter in the Mitsubishi Lancer is located inside the glove compartment on the passenger side. The car's air conditioning filter tends to accumulate dust, and after a period of use, the activated carbon filtration function diminishes. Therefore, it must be replaced approximately every 10,000 kilometers. Replacement method: 1. First, open the glove compartment by releasing the small hook on the right side; 2. Squeeze both sides of the glove compartment inward to release the clips, then pull it out. Remove the filter frame and install the new filter. The Mitsubishi Lancer is a sedan with the Mitsubishi emblem launched by Southeast Motors. Its exterior design exudes a dynamic vibe, featuring sharp hawk-eye crystal headlights, a flute-style chrome radiator grille, and highly recognizable LED taillights that appear full of energy. The black-trimmed window frames and pillars, along with stainless steel window frame trims, add a touch of nobility in the finer details. In terms of power, the Mitsubishi Lancer inherits the legacy of the EVO, with its 1.6L engine delivering more efficient and low-consumption performance.
Was this review help?
8
5
Share
More Forum Discussions

Can Water Be Used as a Substitute for Engine Coolant?

Coolant cannot be replaced with water. If water is used as a substitute for coolant, it is highly prone to boiling, which can affect the normal operation of the engine. Coolant Replacement Interval: For regular household vehicles, it is recommended to replace the coolant every two years. Coolant is an essential liquid in the engine cooling system. If the coolant is not replaced for a long time, it will reduce the cooling system's heat dissipation efficiency, and poor heat dissipation will negatively impact the engine's normal operation. Functions of Coolant: Coolant protects the engine cooling system from rust and corrosion, effectively inhibits scale formation, prevents the radiator from overheating, reduces coolant evaporation, and provides lubrication for components such as the water pump and thermostat.
3
4
Share

What Causes Inaccurate Fuel Gauge in Mondeo?

The inaccuracy of the fuel gauge is not a quality issue; it is common in all vehicles. The fuel gauge in a car is not a precision instrument, meaning the measurement of fuel level displayed is not as precise as using a vernier caliper. Additionally, there is gas in the fuel tank, especially when filling up at a high flow rate, which can create gas bubbles. This may show a full tank when, in reality, there is a small amount of gas. Below are the reasons for an inaccurate fuel gauge: 1. The fuel gauge needle moves irregularly: This is a common occurrence, typically observed when the fuel gauge shows the first half of the tank, the needle drops slowly, but after the midpoint, it drops rapidly. However, this irregular movement is not considered a malfunction. It is related to the design of the fuel pump that reflects the fuel level, which cannot uniformly indicate gasoline consumption due to the difficulty in achieving a constant rate of change. This cannot be altered by repairing or replacing parts. 2. Sudden drop to zero: The fuel gauge's indication depends on the fuel level sensor. When this happens, it indicates an issue with the vehicle's fuel level sensor. It is likely that the sensor has become contaminated with impurities from the gasoline it is submerged in over time, affecting the accuracy of the reading if not cleaned promptly. 3. Fuel gauge reading rises: This occurs when the linkage between the fuel level sensor and the float gets stuck, preventing the float from moving up and down normally. As a result, the fuel level sensor does not change, causing the fuel gauge needle to remain fixed at a certain position.
17
2
Share

What is a Pallet Stacker?

Pallet stacker refers to a small vehicle equipped with a power transmission device and a power lifting device, capable of loading, unloading, transporting, and stacking pallets and palletized goods. It belongs to the category of battery-powered stacking vehicles. Applications of Pallet Stackers: They feature a simple structure, flexible operation, excellent micro-movement capability, and high explosion-proof safety performance. They are suitable for operations in narrow aisles and confined spaces, making them ideal equipment for high-rise warehouses and workshop pallet handling. They can be widely used in industries such as petroleum, chemical, pharmaceutical, light textile, military, paint, pigment, coal, etc., as well as in locations containing explosive mixtures like ports, railways, freight yards, and warehouses. They can also enter ship cabins, railway cars, and containers for loading, unloading, stacking, and transporting palletized goods. Classification of Stackers: Stackers are further divided into manual stackers and electric stackers, with electric stackers subdivided into semi-electric and fully electric types. They are suitable for operations in narrow aisles and confined spaces, making them ideal tools for high-rise warehouses, supermarkets, and workshops for handling and stacking palletized goods.
6
5
Share

What is the difference between China IV and China V vehicle emission standards?

Here are the specific differences between China IV and China V: Sulfur content: The sulfur content limit for China IV standard gasoline is 10mg; while for China V standard gasoline it's 50mg. Emission limits: China V has stricter control on nitrogen oxides than China IV, with China V setting the emission limit at 25%. The China IV emission standard is the national fourth-stage motor vehicle pollutant emission standard, with main vehicle pollutants being HC, NOx, CO, PM, etc. Compared to China IV, the China V standard can reduce nitrogen oxide emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles.
18
4
Share

Must I arrive at 9 AM for the driving test (Subject 2) scheduled from 9 AM to 11 AM?

It's best to arrive early. If you haven't received your exam sequence number yet, you can still take the test as long as it's within the scheduled exam time for the day. However, if you've already received your exam sequence number and miss the test due to being late, you won't be able to take it and will have to reschedule. In the scoring criteria for Subject 2, item code 10124 clearly states that candidates who fail to attend the exam at the scheduled time will be deducted 100 points, and the exam will be marked as failed. Below are some important notes for the Subject 2 test: 1. Fasten your seatbelt: Always buckle up immediately after getting in the car. Make sure not to fasten it incorrectly or to the passenger seat, as the system will automatically fail you. Do not unfasten your seatbelt during the entire test. 2. Adjust seating and mirrors: After getting in, adjust the seat and mirrors, fasten your seatbelt, turn on the left turn signal, shift into first gear, and release the handbrake. All six steps are essential. Ensure all preparations are complete before starting. 3. No stopping during the test: There's no time limit for reversing into the parking space, but you must not stop during the process. If the wheels remain stationary for 3 seconds, the system will consider it an intermediate stop. Therefore, controlling your speed is crucial. 4. Hill start time limit is 30 seconds: You have 30 seconds to start on a slope. The system will give a verbal reminder every 10 seconds, and exceeding 30 seconds will result in an automatic fail.
15
2
Share

What's the difference between replacing and repairing a cracked bumper?

Here are the specific differences between replacing and repairing a cracked bumper: In terms of damage extent: If the internal bracket of the bumper is severely damaged or cracked, replacement is generally required; if the bumper only has minor cracks, welding repair can be chosen. In terms of impact: When replacing the bumper, it's best to choose an original manufacturer part. Original bumpers have better quality than aftermarket ones, being less likely to deform even under high pressure and showing minimal color difference. Although repaired bumpers show little difference in color and strength, welding repairs may still pose certain safety risks.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.