Where is the air conditioning filter located in the Laojunyue?

2 Answers
CaliMarie
07/25/25 5:57am
The air conditioning filter in the Laojunyue is located under the decorative panel beneath the right front wiper blade. Pull open the head cover rubber strip, and you will find a plastic clip. Use a flat-head screwdriver to pry open the clip and remove the decorative panel to access the air conditioning filter. The Junyue is a new mid-to-high-end sedan launched by SAIC-GM. "Jun" represents a high-quality, high-end image, while "Yue" carries the meaning of "breakthrough and transcendence." In terms of body dimensions, the Junyue measures 5026mm in length, 1866mm in width, and 1459mm in height, with a wheelbase of 2905mm. In terms of exterior design, the Junyue adopts Buick's new family design language, featuring smooth and elegant body lines and a highly dynamic body proportion.
Was this review help?
11
0
Share
MacAshley
08/10/25 5:58pm
Having driven for over a decade, I can tell you that the cabin air filter in older LaCrosse models is mostly hidden behind the glove compartment on the passenger side. You'll need to release the clips at the bottom of the glove box or unscrew a few screws to access the filter housing, then pull it out to check if replacement is needed. With long-term use of such vehicles, the AC system tends to accumulate dust, leading to stale air and reduced cooling efficiency. I recommend inspecting it every 10,000-20,000 kilometers—don't wait until noticeable odors appear in the cabin. When replacing it yourself, prepare a screwdriver and a damp cloth to clean around the glove box area, being careful not to let dust fall inside.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What is a vehicle VIN code?

Vehicle VIN code is the Vehicle Identification Number, which consists of 17 characters, commonly known as the seventeen-digit code. It contains information about the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. In addition to being found on the vehicle registration certificate, the VIN can also be located in the lower left corner of the front windshield, at the bottom of the B-pillar near the passenger door opening, on the nameplate, and on the vehicle's chassis. VIN code composition: Positions 1 to 3 represent the manufacturer, brand, and type; Positions 4 to 8 indicate vehicle characteristics; Position 9 is the check digit; Position 10 denotes the model year; Position 11 identifies the assembly plant; Positions 12 to 17 are the serial number.
1
5
Share

How many colors are available for the 2019 New Sagitar?

2019 New Sagitar comes in 8 colors, namely Polar White, Storm Blue, Seashell Gold, Flintstone Gray, Pacific Blue, Manganese Black, Crystal Silver, and Roman Red. The dimensions of the 2019 New Sagitar are 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. The car features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension. The 2019 New Sagitar is equipped with a 1.2T turbocharged engine paired with a 5-speed manual transmission. This engine delivers a maximum power of 85kW and a maximum torque of 175Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head and block.
1
1
Share

What to Do When You Run Out of Gas on the Highway?

Methods to deal with running out of gas on the highway: 1. Find a safe place to park, then call the road rescue hotline, inform the rescuers of the difficulty you are facing, clearly state your location, and wait for the arrival of the road rescue team; 2. Call a professional rescue company. This type of rescue company is not the official one mentioned in the first method, but a commercial rescue company with partners nationwide, so it is not restricted by location; 3. Call your insurance company. Of course, when purchasing insurance, make sure to understand clearly whether the company offers nationwide rescue services, as some small insurance companies may not have this capability.
6
1
Share

What is the difference between a one-way street and a straight lane?

The difference between a one-way street and a straight lane: 1. Different placement of signs: One-way streets are usually at the entrance of the road, referring to the entire road; straight lanes are usually at the exit of the road, referring to a single lane. 2. Different shapes of signs: One-way lanes have square signs, while straight lanes have round signs. 3. Different forms of signs: One-way street signs are generally located on the right side of the road and displayed on vertical signs; straight lane signs are usually located on the ground. There are various types of traffic signs, which can be classified in different ways: main signs and auxiliary signs; movable signs and fixed signs; illuminated signs, luminous signs, and reflective signs; as well as variable message signs that reflect changes in the driving environment.
14
5
Share

What is the issue when the EPC light is on?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other conditions. The power-on self-test is a pre-driving check of all vehicle sensors. Typically, if the vehicle is not started, the light will turn off by itself after about 3 seconds. If the EPC light remains on after the vehicle is started or under other circumstances, the common causes include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illuminating under other conditions: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: Issues such as substandard fuel, fuel degradation, or poor fuel atomization can cause the light to come on. Engine fault: Insufficient engine pressure or problems with components like the intake valves can also trigger the EPC light. ECU control unit fault: Interference with the vehicle's computer signals or false alarms from the computer can lead to this issue. Brake light fault: Malfunctions like non-functional brake lights, faulty brake switches, or brake circuit issues can cause the EPC light to illuminate. Solutions for the EPC light: Troubleshoot the intake system, use the appropriate fuel grade, clean the throttle body, etc. Remove carbon deposits from relevant components. Re-flash the ECU with updated data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains off. If it does not illuminate again, there may be no issue, possibly just a temporary influence on the EPC indicator. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, often referred to as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system takes predefined actions to address the powertrain issues. The EPC indicator light typically appears in two colors: yellow and red. A yellow EPC light indicates a fault, but the vehicle can still be driven cautiously to a repair shop. A red EPC light signifies a more severe issue, requiring immediate stopping of the vehicle and contacting a professional for repairs. Continuing to drive with a red EPC light can severely damage core components or compromise driving safety.
16
4
Share

How to Remove and Install the Spark Plugs on a Volkswagen Sagitar?

Method for removing and installing the spark plugs on a Volkswagen Sagitar: 1. Disconnect the ignition coil wiring harness plug and remove the ignition coil fixing bolt; 2. Select the appropriate tool to remove the spark plugs and take them out one by one; 3. Align the ignition coil with the spark plug, install it in place, and use a tool to screw in the bolt; 4. Check if there are any issues with the new spark plugs, place the spark plug into a dedicated socket, screw it into the spark plug hole, tighten the spark plug, turn off the ignition switch, open the engine hood, and install the three-piece set; 5. Use a digital torque wrench to tighten and complete the installation. The Volkswagen Sagitar has a body length, width, and height of 4753mm, 1800mm, and 1462mm respectively, with a wheelbase of 2731mm. The car's engine has a maximum power of 85kw and a maximum torque of 175nm.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.