Where is the air conditioning filter located in the Kuga?

2 Answers
DeJackson
07/29/25 11:52pm
The air conditioning filter in the Kuga is located inside the glove compartment on the passenger side. The function of the car's air conditioning filter is to filter odors, pollen, dust, harmful gases, and various unpleasant smells. The filter also efficiently captures and adsorbs particulate impurities, providing oil filtration and air purification performance, while effectively removing organic gases such as benzene, phenol, ammonia, formaldehyde, xylene, and styrene. Precautions for replacing the air conditioning filter are as follows: 1. Always replace the air conditioning filter with the vehicle turned off. 2. Pay attention to the installation orientation of the filter to avoid installing it backward. 3. Purchase air conditioning filters from reputable manufacturers, ensuring the appearance and dimensions are checked and compared. 4. When loosening screws or removing clips, be sure to apply appropriate force. 5. After installation, check if the filter is properly seated—the filtering surface must cover the entire air duct, with no gaps around it. Otherwise, filtration may fail.
Was this review help?
15
3
Share
EmmaFitz
08/16/25 3:24am
I often drive the Ford Kuga, and I remember clearly where the cabin air filter is located—it's behind the glove compartment on the passenger side. To replace it, you'll first need to clear out any items in the glove box, then look inside and you'll find a small cover at the back. Gently pry open the clips with your hands or a small tool, remove the cover, and you'll see the filter. I've changed it a few times myself—it's quite simple, though it might be a bit tricky the first time. I recommend replacing it every 10,000 kilometers or once a year. This filter can trap dust, pollen, and even odors, keeping the air inside the car fresh, which is important for health. I often drive on highways, and after replacing the filter, I noticed much better airflow and easier breathing. Make sure to buy the correct filter model—OEM or reputable brands offer more reliable quality. Don’t go for cheap, low-quality ones, as they can clog easily and affect AC performance. Developing a habit of regular inspection and replacement can also extend the lifespan of your AC system and prevent minor issues from causing trouble.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

How Often Should the Three-Way Catalytic Converter Be Cleaned?

The three-way catalytic converter should be cleaned approximately every 20,000 to 30,000 kilometers. Its function is to convert harmful gases such as carbon monoxide, hydrocarbons, and nitrogen oxides in vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. It is an essential external purification device installed in the vehicle's exhaust system. The method for cleaning the three-way catalytic converter is as follows: 1. Use a lift to raise the vehicle to the normal working height; 2. Remove the three-way catalytic converter from the vehicle; 3. Prepare oxalic acid using specialized maintenance equipment; 4. Soak the three-way catalytic converter in the prepared oxalic acid solution; 5. Rinse off any remaining oxalic acid solution and impurities with clean water.
1
3
Share

What are the cylinder arrangement forms of the cylinder block?

The cylinder arrangement forms of the cylinder block include: 1. L-type in-line: All cylinders are arranged at the same angle in a single plane, and only one cylinder head is used; 2. V-type arrangement: All cylinders are divided into two groups, with adjacent cylinders arranged at a certain angle to form a plane with an angle between the two groups; 3. W-type arrangement: Consists of two small V-shapes forming a large V-shape, with two groups of V-type engines sharing a single crankshaft; 4. H-type arrangement: Refers to a cylinder angle of 180 degrees; 5. VR arrangement: Refers to an engine with a 15-degree angle. The cylinder block is the main body of the engine, connecting the cylinders and the crankcase into one unit, serving as the supporting framework for installing pistons, crankshafts, and other components and accessories.
16
0
Share

How Long Can a Car Key Last After the Low Battery Warning?

Car keys can last for about 3 hours after the low battery warning. The method to replace the car key battery is as follows: 1. Press the round button on the side of the key to remove the mechanical key; 2. Insert a tool into the gap at the top of the key and pry open the back cover; 3. Push the battery to one side to remove and replace it. Car keys utilize the wireless remote control function of the central locking system, allowing you to remotely unlock and lock the doors without inserting the key into the lock. The method to start the car when the key battery is dead is: 1. Press the button on the side of the remote key to remove the mechanical key; 2. Insert the key into the door handle of the driver's side and open the door; 3. Place the car key near the lower right corner of the steering wheel and press the start button.
10
0
Share

When to Use High Beams?

Conditions for using high beams include: 1. Roads without street lighting or with poor illumination; 2. When overtaking other vehicles; 3. When navigating corners or curves; 4. Driving in conditions of low visibility such as fog, rain, snow, dust, or hail; 5. When needing to read road signs. The method to activate high beams is to push the light control lever outward. Their purpose is to enhance visibility and expand the field of observation. Car lights and their functions can be categorized as: 1. Headlights: Illuminate the road and objects ahead to ensure driving safety; 2. Width indicators: Show the vehicle's width to alert oncoming and following vehicles; 3. Fog lights: Make the vehicle more noticeable to oncoming and following traffic; 4. Turn signals: Alert surrounding vehicles and pedestrians.
17
5
Share

What does 'climate' mean in a car?

'Climate' in a car refers to the intelligent air conditioning climate control system. The method of use is: press this button when turning on the air conditioning. The intelligent air conditioning climate control system combines GPS information, time, and driving direction to control the temperature and airflow in each zone of the air conditioning system, performing operations such as cooling, heating, ventilation, and air purification inside the cabin. The car air conditioning, also known as the car air conditioning device, is used to adjust and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to an optimal state. The method of use is: 1. Turn the air conditioning control knob to cooling or heating; 2. Press AC when cooling is needed.
10
5
Share

What are the differences between the Mercedes-Benz E260 and E300?

The differences between the Mercedes-Benz E260 and E300 are: 1. Different acceleration times: The 0-100 km/h acceleration time for the E260 is 8.7 seconds, while the E300 achieves it in 6.6 seconds. 2. Different top speeds: The E260 has a top speed of 230 km/h, whereas the E300 reaches 250 km/h. 3. Different power outputs: The E260 is equipped with a 2.0t low-power engine with a maximum power output of 135 kW, while the E300 features a 2.0t high-power engine delivering 190 kW. Both the E260 and E300 belong to the mid-to-large-size sedan category, with identical body dimensions: length 5021mm, width 1854mm, height 1487mm, and a wheelbase of 3014mm.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.