···
Log in / Register

Where is the air conditioning filter located in the Jeep Renegade?

5 Answers
DelAvery
07/24/25 6:01pm

The air conditioning filter in the Jeep Renegade is located inside the glove compartment on the passenger side. Simply open the glove compartment to access it. To replace the air conditioning filter, first open the glove compartment, then remove the filter cover to take out and replace the filter. The Jeep Renegade is a compact SUV under the Jeep brand. In terms of suspension, the Jeep Renegade uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. The Jeep Renegade is equipped with three types of engines: a 1.3-liter turbocharged engine, a 1.4-liter turbocharged engine, and a 2.0-liter naturally aspirated engine.

Was this review help?
12
2
Share
SanJoanna
08/10/25 8:23am

I've been driving a Jeep Renegade for several years and have replaced the cabin air filter several times. It's usually hidden behind the glove compartment on the passenger side, and you need to remove the glove box to access it. The design of this location is quite convenient. After removing the glove box clips, the filter is housed in a small drawer, and you can simply pull it out to replace it with a new one. Whenever I change the filter myself, I always make it a habit to check the air ducts first, because when the filter gets clogged, the airflow from the AC decreases, which can be particularly uncomfortable during summer drives. I recommend replacing it every 10,000 kilometers or every six months—don't skimp on this small expense. If the cabin air filter becomes clogged with dust, the air inside the car can become unpleasant and may even trigger allergies. Be gentle when handling the parts to avoid damaging the plastic components, and make sure everything fits snugly when reassembling.

Was this review help?
1
4
Share
Expand All
DiGage
09/26/25 2:46am

Last time I helped a friend with the air conditioning issue on their Jeep Renegade, I also checked the location of the air filter. It's installed in the area below the glove compartment on the passenger side, and you'll need to reach in and feel around for that small compartment. If you're replacing it yourself, remember to prepare a Phillips screwdriver and a new filter. Removing the glove box is quite simple, but don't rush to pull it forcefully—check for any securing screws first. Don't delay replacing the filter; a clogged one can affect the entire air conditioning system, causing slow airflow and unpleasant odors. I've seen cases where people neglected to change it, resulting in strange smells in the car. The cabin air filter is actually an unsung hero—it filters out pollen and dust, protecting our respiratory health. It's recommended to inspect and replace it regularly, with the frequency adjusted based on your driving environment. For example, if you drive more in the city, replace it more often.

Was this review help?
5
3
Share
Expand All
VonMatthew
11/09/25 4:50am

From a mechanical maintenance perspective, the Jeep Renegade's cabin air filter is located in the passenger-side footwell area of the dashboard, specifically behind the glove box. To access it, you'll need to remove the glove box - a fairly straightforward process. After opening the glove box, locate the clips or screws on both sides, release them to remove the entire unit. The filter comes in a flat, elongated housing; simply open the cover to replace it. While the replacement process is simple, if left unchanged for extended periods, dust accumulation will reduce AC efficiency, decrease airflow, and potentially lead to bacterial growth. I recommend replacing it approximately every 12,000 kilometers to maintain optimal cabin air quality.

Was this review help?
20
2
Share
Expand All
IvanRose
12/30/25 6:37am

I usually drive a Jeep Renegade for daily family use. The cabin air filter is located behind the glove compartment on the passenger side, which isn't too hidden. You can try opening the glove box and looking down to find it yourself. Replacing it requires some patience - gently pull apart the components without forcing them. As a family user, I'm particularly concerned about the filter's function - it filters out dust and pollutants from outside, so my kids won't cough even after sitting in the car for long periods. I replace the filter every six months or 10,000 kilometers, choosing higher quality ones. After replacement, the air inside the car becomes noticeably fresher and breathing feels smoother. Remember, regular maintenance saves money and hassle, preventing potential AC issues that might disrupt your trips.

Was this review help?
15
5
Share
Expand All
More Forum Discussions

What is the difference between BMW's three-cylinder and four-cylinder engines?

Compared to four-cylinder engines, three-cylinder engines have less exhaust interference. When paired with small-inertia turbo technology, three-cylinder engines offer better low-end torque and reduced turbo lag compared to four-cylinder engines. More knowledge about engines is as follows: 1. Introduction: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy. The first external combustion engine was invented in 1816 by R. Stirling in the UK (Scotland) and later improved by Watt into the steam engine. 2. Classification: Engines can refer to both power generation devices and the entire machine including the power unit (e.g., gasoline engines, aircraft engines). Types include internal combustion engines (e.g., gasoline engines), external combustion engines (e.g., Stirling engines, steam engines), gas turbines (used in racing cars), electric motors, etc.
18
2
Share

What to Do If You Forget to Bring the Vehicle License While Driving?

If you forget to bring the vehicle license and are caught by traffic police, you will be penalized. The penalty for driving without a vehicle license includes the temporary seizure of the motor vehicle and the issuance of a compulsory measure certificate until the relevant proof materials (vehicle license) are presented, after which an administrative penalty decision will be made. The following are the relevant regulations: 1. Article 19 of the "Road Traffic Safety Law of the People's Republic of China": To drive a motor vehicle, one must legally obtain a motor vehicle driving license. The driver shall drive the motor vehicle according to the permitted vehicle type stated on the driving license; when driving a motor vehicle, the driver shall carry the motor vehicle driving license. 2. Article 95: Motor vehicles driven on the road without hanging a motor vehicle license plate, without displaying an inspection qualification mark or insurance mark, or without carrying the vehicle license or driving license shall be detained by the traffic management department of the public security organ, and the party concerned shall be notified to provide the corresponding plate, mark, or complete the corresponding procedures, and may be punished in accordance with the provisions of Article 90 of this Law. The motor vehicle shall be promptly returned to the party concerned after providing the corresponding plate, mark, or completing the corresponding procedures.
8
3
Share

What is the most suitable engine oil for Hyundai Verna?

Hyundai Verna is best suited with semi-synthetic engine oil. Engine oils are categorized into three types: mineral oil, semi-synthetic oil, and fully synthetic oil. Semi-synthetic oil is positioned between mineral oil and fully synthetic oil, with a significant amount of anti-corrosion additives added to enhance the oil's stability and oxidation resistance. Below is an introduction to these types of engine oils: 1. Mineral oil: Mineral oil is the residual oil left after refining gasoline and heavy oil from petroleum. It is essentially a natural oil with more impurities, cheaper compared to semi-synthetic and fully synthetic oils, but offers poorer lubrication for the engine and has a shorter service life. 2. Semi-synthetic oil: Semi-synthetic oil is intermediate between mineral oil and fully synthetic oil, containing a large amount of anti-corrosion additives to improve stability and oxidation resistance. 3. Fully synthetic oil: Fully synthetic oil is the highest quality and most durable among the three types, also the most expensive. Typically, it can last for 10,000 to 12,000 kilometers in general passenger cars without deteriorating.
5
0
Share

What does it indicate when encountering a continuously flashing yellow light at an intersection?

When encountering a continuously flashing yellow light at an intersection, it indicates that the traffic signals are temporarily suspended, reminding pedestrians and vehicles to proceed with caution after confirming safety. The yellow light primarily serves as a warning in this situation. Additional information: 1. Yellow light on: Vehicles that have already crossed the stop line may continue to proceed. 2. Green light on: Vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of through vehicles or pedestrians. 3. Red light on: Vehicles are prohibited from proceeding. 4. Intersections without non-motorized vehicle signals: At intersections without dedicated non-motorized vehicle or pedestrian crossing signals, non-motorized vehicles and pedestrians should follow the indications of the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed provided they do not obstruct the passage of other vehicles or pedestrians.
9
3
Share

What is the relationship between GAC Aion and GAC Trumpchi?

GAC Aion and GAC Trumpchi are both independent brands under GAC Group. Taking the Aion LX as an example, here is a detailed introduction to the Aion LX: 1. Vehicle Positioning: The Aion LX is a pure electric mid-size SUV. 2. Powertrain: The Aion LX comes in three different horsepower variants: 184 horsepower, 204 horsepower, and 408 horsepower. It is equipped with a front and rear dual high-performance electric four-wheel drive system, with a combined maximum power of 300kW, an NEDC comprehensive range of over 600km, and a 0-100km/h acceleration time of just 3.9 seconds. 3. Suspension: The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
7
5
Share

What is the minimum ground clearance of the 2020 BMW X1?

The minimum ground clearance of the 2020 BMW X1 is 195 millimeters. The minimum ground clearance of the 2020 BMW X1 refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Generally, the higher the ground clearance of the 2020 BMW X1, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds may decrease. The 2020 BMW X1 is equipped with two engine options: a 1.5T and a 2.0T, balancing powerful performance with fuel efficiency. The 1.5T model delivers a maximum power of 103 kW (140 hp) and a maximum torque of 220 Nm, while the 2.0T model offers a maximum power of 141 kW (192 hp) and a maximum torque of 280 Nm. The dimensions of the 2020 BMW X1 are 4565 mm in length, 1821 mm in width, and 1620 mm in height, with a wheelbase of 2780 mm. Typically, sedans have a ground clearance ranging from 110 mm to 150 mm, while SUVs range between 200 mm and 250 mm. However, the ground clearance of the 2020 BMW X1 is not static; it depends on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban driving on well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or driving on rough terrain, a higher ground clearance is advisable to avoid underbody scrapes or damage.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.