Where is the air conditioning filter located in the Ford Kuga?

1 Answers
Clark
07/28/25 5:43pm
The air conditioning filter in the Ford Kuga is located under the glove compartment. The installation method is as follows: 1. Remove the clips of the glove compartment and take off the protective panel; 2. Remove the air conditioning filter cover and the power socket; 3. Take out the old air conditioning filter and install the new one; 4. Reinstall the cover, socket, and glove compartment. The functions of the air conditioning filter are: 1. To provide fresh air; 2. To absorb harmful substances; 3. To filter solid impurities. Taking the 2019 Ford Kuga 2WD Jingyi model as an example, its body dimensions are: 4524mm in length, 1838mm in width, and 1685mm in height, with a wheelbase of 2690mm and a fuel tank capacity of 60 liters.
Was this review help?
11
1
Share
More Forum Discussions

What does the driver's license clearance date mean?

The driver's license clearance date refers to the date when the accumulated demerit points can be cleared if the driver has not accumulated 12 points before the annual inspection. Below is a detailed introduction about the driver's license clearance date: 1. Definition: The cumulative scoring period for road traffic safety violations is 12 months, with a maximum of 12 points, calculated from the date of initial issuance of the motor vehicle driver's license. 2. Scoring cycle: According to Article 65 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the cumulative scoring cycle (i.e., the scoring cycle) for road traffic safety violations is 12 months, with a maximum of 12 points, calculated from the date of initial issuance of the motor vehicle driver's license. 3. Fine transfer: Article 69 states that if a motor vehicle driver has not accumulated 12 points within a scoring cycle and has paid all fines, the points will be cleared. If the driver has not accumulated 12 points but still has unpaid fines, the points will be carried over to the next scoring cycle.
19
5
Share

What is the fuel tank capacity of the Audi Q2L?

The fuel tank capacity of the Audi Q2L is 50 liters, and the manufacturer recommends using 95-octane gasoline. After turning off the vehicle, do not lock it; simply press the fuel tank cover to open it. The refueling process for the Audi Q2L is as follows: 1. Press the left side of the fuel tank to open the fuel tank cover. 2. Unscrew the fuel tank cap counterclockwise. 3. Insert the fuel tank cap into the open fuel tank cover from above. 4. Insert the fuel nozzle into the fuel filler port. 5. Begin refueling. When the fuel nozzle cuts off for the first time, the tank is full. Stop refueling to prevent overflow due to expansion. 6. After refueling, do not immediately pull out the fuel nozzle; wait for 5 seconds at the fuel filler port to prevent minor fuel drips. 7. Remove the fuel tank cap, cover it, and ensure it is tightly screwed on. 8. Close the fuel tank cover until you hear a 'click' sound.
2
1
Share

What Does Car Ozone Disinfection Mean?

Ozone disinfection is a method that utilizes the car's air conditioning circulation system for disinfection. Ozone disinfection requires the use of specialized disinfectant solution: By introducing a specialized disinfectant solution into the circulation system, it can eliminate odors inside the car and has certain sterilization effects, particularly targeting amines, nicotine, bacteria, etc. The ozone disinfection method is relatively simple to operate: a hose connected to a car-specific disinfectant machine is extended into the car cabin, and the machine is turned on. The machine delivers high-concentration ozone generated through high-voltage discharge to every corner of the car, completing the process in just a few minutes. Advantages of ozone sterilization: Car ozone sterilization is a bactericidal-level method with thorough sterilization effects and a broad sterilization range without residue. It can kill bacterial propagules, spores, viruses, fungi, etc. Ozone is an environmentally friendly disinfectant that does not pollute the environment. Due to its poor stability, ozone quickly decomposes into oxygen or single oxygen atoms, which then combine into oxygen molecules, leaving no toxic residues. Ozone sterilization does not harm the human body. After using ozone to sterilize the interior of the car, ventilating for about half an hour ensures no residues remain. However, ozone can be harmful to humans; its distinctive odor can irritate the respiratory mucosa. Therefore, no one should remain in the car during ozone disinfection, and the car should be ventilated for at least half an hour before re-entry. Disadvantages of ozone disinfection: Prolonged use of ozone disinfection can cause rubber components in the car to age. The quality of ozone machines in car detailing shops varies, and the price of each disinfection service can differ significantly. Additionally, a slight odor may linger after each use.
7
2
Share

Is it serious to drive without releasing the handbrake?

Driving without releasing the handbrake is quite serious. Here are the consequences of driving with the handbrake engaged: 1. Performance deterioration: Forgetting to release the handbrake will accelerate the wear of the brake discs, and the brake pads may harden due to overheating, leading to a decline in handbrake performance and elongation of the handbrake cable. 2. Handbrake failure: Driving for a long time without releasing the handbrake may cause the brake caliper to seize, leading to brake fluid leakage and an increase in the temperature of the brake fluid, eventually resulting in complete loss of the handbrake's braking function. 3. Smoke from the rear of the car: Over time, you may smell a burning odor, and in severe cases, smoke may even appear from the rear of the car. Driving with the handbrake engaged can also cause some damage to the vehicle's tires, and the faster the speed, the greater the damage to various components.
8
3
Share

How to adjust the rearview mirror of the new Sagitar?

The knob for adjusting the rearview mirror is located on the driver's side door. Turn the knob to the L position to adjust the angle of the left mirror, and turn it to the R position to adjust the angle of the right mirror. Once adjusted to the desired position, rotate the knob back to the middle to deactivate the adjustment. Related details are as follows: 1. The rearview mirror has a field of view, which refers to the range that the mirror can reflect. In the industry, there is a concept of three elements of the field of view: the distance between the driver's eyes and the rearview mirror; the size of the rearview mirror; and the curvature radius of the rearview mirror. 2. These three elements are interrelated. When the distance and size of the rearview mirror are the same, the smaller the curvature radius of the mirror, the larger the field of view it reflects. When the curvature radius is the same, the larger the size of the mirror, the larger the field of view it reflects. Additionally, the rearview mirror also has a reflectivity index. The higher the reflectivity, the clearer the image reflected by the mirror. The level of reflectivity is related to the reflective film material on the inner surface of the mirror.
10
3
Share

Are Car Headlights the Same as High Beams?

Car headlights typically refer to high beams. Car headlights provide illumination for drivers to light up the road ahead and also serve as a warning to alert vehicles and pedestrians in front. Car headlights, also known as front headlamps, include several types such as halogen lamps, xenon lamps, LED lamps, and laser lamps. The most common types are halogen and LED lamps. Halogen headlights are the most common, usually used in standard vehicle models due to their low cost, simple structure, and strong penetration. Xenon lamps are gas discharge lamps, typically found in mid-to-high-end car brands, offering high brightness but at a higher price. LED lamps, or light-emitting diodes, are more energy-efficient, have a longer lifespan, faster response times, and minimal brightness degradation. Laser lamps provide high brightness and long-distance illumination but have a narrower beam and are considered more high-end. How to use car headlights: Turn the light switch to the low beam position to activate the low beams. In daily driving, low beams are usually sufficient. However, in special cases, such as when driving on roads without streetlights or on long, straight, and dimly lit roads, high beams should be used. High beams are generally activated by pushing the lever forward or pulling it inward. Pushing it forward turns the high beams on continuously, while pulling it inward briefly flashes the high beams. When using high beams, it is essential to turn them off during oncoming traffic and only reactivate them after passing, to avoid blinding the other driver and ensure safe and courteous driving.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.