···
Log in / Register

Where is the air conditioning filter located in the Fiesta?

4 Answers
NolanDella
08/29/25 4:36am
The air conditioning filter in the Fiesta is located on the left side under the passenger seat. Its functions are: 1. To ensure the filter fits tightly against the housing, preventing unfiltered air from entering the cabin; 2. To separate dust, pollen, and abrasive particles from the air; 3. To absorb moisture, soot, ozone, and odors from the air. Taking the 2014 Fiesta as an example, it is a compact car under Changan Ford, with body dimensions of 3980mm in length, 1722mm in width, and 1470mm in height, a wheelbase of 2495mm, a hatchback body structure, a fuel tank capacity of 42 liters, and a trunk capacity of 270 liters.
Was this review help?
16
3
Share
Lamar
09/11/25 2:24am
I've been driving the Fiesta for several years, and the cabin air filter is located behind the glove compartment on the passenger side. Changing it yourself is quite simple: first, open the glove compartment, which usually has two or three clips—just press them gently to remove the glove box. Once removed, you'll see a shallow slot where the filter is tucked inside. Gently pull it out and replace it with a new OEM or compatible filter. Don't underestimate this part—replacing it every 12 months or around 10,000 kilometers effectively filters pollen, dust, and outdoor pollutants, keeping the cabin air fresh. Especially in summer when using the AC, a clogged filter can reduce airflow and cause unpleasant odors. I often do it myself to save on labor costs at the dealership. A new filter only costs a few dozen yuan, and all you need is a small screwdriver. Even beginners can try, but be careful not to break the clips. Keeping the filter clean ensures smoother breathing while driving and a more comfortable ride.
Was this review help?
19
3
Share
Expand All
DiEverett
10/25/25 3:13am
As a newbie who often drives a Fiesta, I spent quite some time figuring out where the cabin air filter was when I first started. Later, I discovered it's located behind the glove compartment in front of the front passenger seat. After opening the glove box, you'll notice some plastic clips or small hooks on the inner side. Gently press them to remove the entire glove compartment, revealing an empty slot where the filter lies. If you're clumsy or unfamiliar with the process, check the owner's manual for diagrams, or simply drive to a repair shop for assistance. Replacing it is only necessary every year or two. A clogged old filter can weaken the AC airflow, cause unpleasant odors in the car, and affect health. Initially, I didn't know much, but after changing it myself, I felt quite accomplished. I recommend buying standard-sized filters and avoiding cheap, low-quality ones. Developing a habit of regular checks will make your car's AC run more efficiently.
Was this review help?
17
1
Share
Expand All
WillowLynn
12/08/25 3:36am
I take my kids to and from school in a Fiesta, and the cabin air filter needs to be changed frequently. It's located behind the glove box—just open it and remove the glove box to see it. When the filter gets dirty, the air inside the car becomes polluted, which can easily cause allergies or colds in children. I check it every quarter and replace it myself—it's simple and safe. The location is easy to find, and maintaining it ensures there are no bad odors in the car, making the ride comfortable for the family and saving on repair costs.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What is MG?

MG is a British automobile brand, known as 'MG' in China. Taking the MG 6 as an example from the MG lineup, its body dimensions are 4695mm in length, 1848mm in width, and 1462mm in height, with a wheelbase of 2715mm. In terms of exterior design, the MG 6 features a dot-matrix design for the front grille, with the lower part of the grille designed in a trapezoidal shape. The side profile of the car adopts a dual waistline design, with the upper waistline extending from the rear of the headlights to the rear door panel, complementing the downward-sloping roofline. The car is equipped with a MacPherson independent front suspension and a multi-link independent rear suspension. It offers two transmission options: a TST 7-speed dual-clutch automatic transmission and a 6-speed manual transmission.
11
1
Share

Where Should a Dash Cam Be Installed?

A dash cam should be installed below the interior rearview mirror and connected to it, or mounted on the back of the interior rearview mirror. After installation, adjust the angle from the driver's position. A dash cam is a device that records images, sounds, and related information during vehicle travel. Installing a dash cam in a car allows for the recording of the entire driving process, including video and audio, which can serve as evidence in traffic accidents. The basic components of a dash cam include: 1. The main unit; 2. A speed sensor; 3. Data analysis software; 4. An infrared camera. To turn the dash cam on or off, press and hold the power button. It automatically turns on when connected to a charger and delays for 5 seconds before automatically turning off when the charger is disconnected by the owner.
2
2
Share

Why does the car move backward when in drive gear?

Because the engine's power and the reverse motion resistance of the transmission shaft are absorbed by the torque converter. Here are the specific details of related content: 1. Possible causes: It may be caused by a faulty transmission gear position sensor, valve body failure, or shift mechanism malfunction. Essentially, rolling backward on a slope means the car doesn't have enough power to climb, causing it to roll back. Alternatively, if the car is heavily loaded, the resistance might exceed the engine's output power. 2. Solutions: Automatic transmissions usually have a delay of more than 1 second! After shifting into drive gear, do not release the brake immediately, and the car won't roll backward. When rolling occurs, the correct approach is to brake promptly. If equipped with a hill-start assist system, wait for the system to function properly before starting again.
11
0
Share

How to Deal with Whitening of Exterior Plastic on Cars?

Solutions for whitening of exterior plastic on cars: 1. Use dashboard wax, which is typically applied to the dashboard or plastic parts for polishing. Using dashboard wax on whitened exterior plastic is both time-saving and labor-saving; 2. Use coating care agents, which can have a great effect on plastic parts. Whitened or dull plastic parts can be maintained with coating care agents; 3. Use shoe polish to cover it up. For black plastic parts that have whitened, black shoe polish works well and is convenient to use; 4. For wax that has stuck due to waxing, it can be removed with tar asphalt cleaner or by gently wiping repeatedly with a towel dipped in all-purpose water. Whitening of exterior plastic on cars is irreversible. Once whitened, it can only be concealed with maintenance products and cannot be maintained for long. It is recommended to regularly maintain the plastic parts both inside and outside the car.
4
3
Share

How to Remove the Gear Panel of a Camry?

The method to remove the gear panel of a Camry is to gently pry it open by inserting a utility knife into the gap. Traditional car gear panels are primarily made of plastic, so protective measures should be taken during removal to avoid scratching the panel. Taking the 2018 2.5Q Flagship Edition Camry as an example, the vehicle's body dimensions are 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. It has a maximum power output of 154kw and a maximum torque of 250nm. The engine model equipped in this car is A25A, with an inline cylinder arrangement, naturally aspirated intake form, and hybrid injection fuel supply method.
19
1
Share

Is it necessary to display the annual vehicle inspection sticker?

It is necessary to display the annual vehicle inspection sticker. According to relevant regulations, vehicles on the road should affix the current year's inspection sticker in a visible position on the upper right corner of the front windshield. It is important to note that private cars exempt from inspection for 6 years need to collect the annual inspection sticker every 2 years, which can be obtained at the vehicle management office or traffic police station. Before the annual inspection, it is necessary to handle any traffic violations, and then bring the vehicle registration certificate, a copy of the compulsory traffic insurance policy, and the owner's ID card for the inspection. When handling compulsory traffic insurance for the vehicle, you can directly use the copy of the insurance policy to complete the exemption inspection procedures. The compulsory insurance also includes the record of the vehicle and vessel tax. Be careful not to leave the original document with the vehicle management office, as the original will be needed for future insurance claims.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.