···
Log in / Register

Where is the air conditioning filter located in the Familia?

4 Answers
AvaAnn
07/24/25 8:00am
The air conditioning filter in the Familia is located behind the glove box on the passenger side. If you want to replace the air conditioning filter, you need to remove the glove box on the passenger side, as this is the only way to access and replace it. The air conditioning filter is a wear part that needs to be replaced regularly. If it is not replaced for a long time, it will affect the health of the passengers in the car and the normal operation of the air conditioning system. The Familia is a model produced by Haima Automobile, featuring a balanced and practical design with a stylish appearance. The body lines are finely crafted with elegant curves, in line with Mazda's consistent harmonious design philosophy. The dynamic design is infused with an elegant temperament, and the overall body lines start from the pentagonal shape at the center of the front grille, extending from the front to the sides and from the bottom to the top, giving the entire body a good streamlined shape.
Was this review help?
4
5
Share
SanKevin
08/11/25 12:57am
I've been driving my Familia for several years, and the cabin air filter is located behind the glove compartment in front of the passenger seat. I remember when I last changed it myself, I first sat in the passenger seat, opened the glove compartment door, gently pressed the clips on both sides inward to remove the compartment, and then saw a rectangular cover. Lifting the cover reveals the filter inserted inside—just pull out the old one and replace it with a new one. The whole process is super simple and takes less than 5 minutes. The key is to pay attention to the installation direction; the arrow usually points in the direction of airflow. I recommend replacing it every 10,000 kilometers or every six months because a clogged filter can reduce air conditioning airflow, lead to unpleasant odors in the car, and affect driving comfort. Keeping a spare filter in the car makes it easy to replace anytime, keeping the air much fresher.
Was this review help?
18
2
Share
Expand All
OClara
09/24/25 8:41am
I've replaced the cabin air filter on my Familia several times, mainly located behind the glove compartment on the passenger side. The operation is quite straightforward: first open the glove box door, usually there are plastic clips on both sides - gently press them to remove the compartment, revealing the cover panel behind. Lift it to expose the filter slot, pull out the old filter, then insert the new one in the correct orientation and secure it in place. DIY replacement saves money and hassle, requiring only a pair of gloves for dust protection. After replacement, the AC airflow sounds cleaner, with less dust in the car and noticeably more comfortable breathing. Periodically checking the filter prevents clogging or mold growth - maintaining good ventilation is crucial, especially when you feel significantly improved air quality after long drives.
Was this review help?
7
2
Share
Expand All
June
11/08/25 4:05am
The location of the Familia's cabin air filter is clear: behind the glove box on the passenger side. Just remove the glove box to see the cover panel, and replacing the filter is simple. Regular replacement is crucial as it filters out dust and pollen, improving air quality—health comes first. Driving with fresh air gives you peace of mind. It's recommended to check it during every maintenance service.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

Why are Sentury tires not available on the market?

In fact, Sentury tires are available on the market, and car owners can purchase them on some e-commerce platforms. Here is some relevant information: Introduction: Qingdao Sentury Tire Co., Ltd. – Headquartered in Qingdao, China, the company is dedicated to the research, development, and production of green, safe, high-quality, and high-performance semi-steel radial tires and aviation tires. Brands: The company owns four major tire brands: Sentury (SENTURY), Landsail (LANDSAIL), Delinte (DELINTE), and Groundspeed (GROUNDSPEED). Currently, it has established two tire production bases in Qingdao, China, and Thailand. The Qingdao factory has a designed production capacity of 12 million semi-steel radial tires, while the Thailand factory has a designed production capacity of 10 million semi-steel radial tires.
14
2
Share

Is a Fuel Consumption of 17 L/100km Normal for a New Car?

A fuel consumption of 17 L/100km is not normal for a new car. Here are some important considerations for using a new car: Avoid overloading: Carrying too much weight during the break-in period can damage mechanical components. The power transmission parts of a new car have not yet fully worn in, and aggressive acceleration can cause irreversible damage. Therefore, it is essential to follow the principle of "slow and steady" during the break-in period. Speed limits for new cars: Domestic cars are generally limited to 40~70 km/h, while imported cars are usually limited to 100 km/h. When the throttle is fully open, the speed should not exceed 80% of the maximum speed. The recommended engine speed during the break-in period is between 2000~4000 rpm.
6
1
Share

What are the brand models under the Toyota brand?

Toyota Group's brand models are as follows: Lexus: Lexus (LEXUS) is a globally renowned luxury car brand under the Japanese Toyota Group. Founded in 1983, it took only a little over a decade to surpass the sales of Mercedes-Benz and BMW in North America. The origin of Lexus cars stems from Toyota's need for another breakthrough in 1983, which was whether it could create a luxury car to challenge the top-tier market. Scion: This Scion is not the one from LOL. Scion is the youngest car brand globally, representing the advent of the personalized car era. Through a newly established dealership system, every car owner will have the opportunity to experience Scion's meticulously designed personalized car buying process and purchase a unique, personalized Scion car.
11
5
Share

How many points are deducted for reversing on an urban elevated road?

Reversing at an elevated road entrance will result in a fine and a one-time deduction of 12 points. The following are the penalties for reversing on highways and the regulations stipulated in national traffic laws and regulations: Penalties for reversing on highways: This regulation also applies to penalties for reversing on highways. When driving on highways, motor vehicles are not allowed to reverse, drive in the opposite direction, make U-turns by crossing the central divider, or stop within the lane. Regulations in national traffic laws and regulations: The road traffic safety management of urban expressways shall be implemented with reference to the provisions of this section. Due to the good road conditions and high speeds on urban expressways and highways, reversing or driving in the opposite direction can easily lead to fatal traffic accidents. If a traffic accident occurs, the perpetrator will be fully responsible.
13
2
Share

Why is there no video signal in the car reversing camera?

The reasons for no video signal in the car reversing camera are as follows: Prolonged use of the reversing camera: Due to prolonged use of the reversing camera, the chip's light-sensing effect deteriorates, not only causing a lot of snowflake-like interference but also leading to the no-signal phenomenon mentioned today. Of course, it could also be due to defects in the car's circuit design. However, such chip abnormalities and design defects are rare. Poor contact: Focus on checking the connectors and plugs, as these adapters are prone to poor contact. Or the video cable might be broken. Due to weather conditions like temperature changes or humidity, the video plug may corrode or have a loose connection, which could cause this problem. Many luxury cars also experience this phenomenon in winter. The wiring harness of the reversing camera runs from the dashboard all the way to the trunk, which is relatively long. Any poor contact in the wiring harness or plug can cause malfunction.
10
1
Share

How Long Does Vehicle Inspection Take at the DMV?

It usually takes about one hour. The new vehicle inspection process at the DMV is as follows: Photography: The photographer will set up the number plate based on the last four digits of the VIN and place it at the lower right corner of the windshield, then take photos of the vehicle. Before photography, the "CCC" sticker and "Vehicle Fuel Consumption Label" affixed to the windshield must be removed. It's best to complete this task before arriving at the DMV, as these two stickers can be difficult to peel off. Rubbing: Rubbing is typically performed in the DMV inspection area. Sometimes the 4S shop may have already done the rubbing, but it's important to check whether they have provided the correct number of copies, as the license plate registration requires two copies of the engine number and three copies of the VIN rubbing.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.