Where is the air conditioning filter located in the Citroen C5?

2 Answers
JudeLee
07/29/25 2:59am
The air conditioning filter in the Citroen C5 is located behind the glove box on the passenger side. Below are the steps to clean the filter: 1. When cleaning the air conditioning filter, first unplug the power cord of the air conditioner to ensure safety; 2. Lift and open the air conditioning panel, and you will see the air conditioning filter, then remove it; 3. When removing the air conditioning filter for cleaning, if there is not much dust on the filter, rinse it directly with clean water, but be careful not to rinse the side with dust, and do not use detergents with strong acids or alkalis. If there is a lot of dust accumulated on the filter, you can soak the filter in a solution of neutral detergent; 4. After cleaning the filter, shake off the excess water and place it in a cool, ventilated area to dry, but do not expose it directly to sunlight; 5. When putting the filter back into the air conditioner, wipe the interior of the air conditioner to ensure it is cleaner for future use.
Was this review help?
19
0
Share
McAxel
08/12/25 6:52am
As an owner of an older Citroën C5, I've gone through several cabin air filter replacements, which are typically located behind the glove compartment on the passenger side. You'll need to open the glove box, remove the securing clips or screws, and then you'll see a small panel. Lifting this panel reveals the cabin air filter slot. This design facilitates filtering dust from incoming outside air. If not replaced regularly, the car's AC may develop odors or experience reduced airflow. I check mine every six months and replace it with standard filters myself, saving a lot on maintenance costs. Note that the exact location may vary slightly by model year – for vehicles around 2010, you might need to bend down to the carpet area to find it. The operation is simple, but avoid using excessive force to prevent damaging plastic components. Safety first.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

Is Car Crystal Coating Good or Not?

Car crystal coating is beneficial for the car paint. Car crystal coating provides a reliable paint sealing technology that efficiently and durably protects the car paint, preventing environmental factors from affecting the color of the paint. The concept of car crystal coating was introduced to differentiate it from waxing and sealing, as it uses inorganic substances like silicon dioxide to form an isolation layer on the car paint surface through the action of high-molecular polymers. This isolation layer has functions such as UV resistance, oil resistance, and hydrophobicity, thereby protecting the paint surface. Functions of car crystal coating: 1. Scratch resistance: The high hardness of diamond crystals can prevent most minor scratches and has self-recovery elasticity. 2. Corrosion resistance: The ultra-fine nano-crystal layer of diamond crystals isolates the paint from the external environment, effectively preventing oxidation and acid rain corrosion. 3. No cracking: Diamond crystals resist UV rays, extreme temperatures, and strong temperature adaptability, preventing cracking or peeling. 4. Easy cleaning: The strong fiber network of diamond crystals fills the tiny pores on the paint surface, achieving a mirror-like effect and making it easier to clean and maintain. 5. Anti-static: Diamond crystals contain anti-static agents, making the paint surface less likely to attract dust. 6. Enhanced brightness: Diamond crystals have a crystal structure similar to diamonds, increasing light refraction and making the car surface brighter with a crystal-clear paint finish. 7. Strong water repellency: The low surface tension of diamond crystals repels water droplets, providing super water repellency and preventing water adhesion.
8
1
Share

What Happens When the Idle Speed is Unstable?

Unstable idle speed in a car is mainly manifested by the fluctuation of the tachometer needle up and down, pointing unstably, moving up and down, often accompanied by idle vibration. Unstable idle speed can be considered one of the most common engine faults, which can range from minor to severe. Under normal circumstances, the engine idle speed is fixed, with the specific level depending on the tuning of the particular model. Generally, a higher idle speed leads to relatively higher fuel consumption, but an idle speed that is too low can cause the engine to vibrate or even stall. Below is relevant information about unstable idle speed: 1. Oil residue and carbon deposits in the throttle body, dirty intake manifold: A clogged intake manifold can cause idle pull, while carbon deposits or oil in the throttle body are the most common causes of unstable idle speed. Carbon deposits in the throttle body can affect its opening, influencing the intake air volume, causing the engine speed to fluctuate erratically after a cold start, being very unstable and accompanied by strong vibrations. 2. Weak sparks from faulty spark plugs: Spark plugs can also accumulate carbon deposits, which can be cleaned to restore their activity, but some spark plugs may be nearing the end of their lifespan, leading to decreased performance. Weak sparks from spark plugs in individual cylinders can affect the car's performance. It is known that spark plug faults can cause the car to exhibit "misfire" symptoms, but minor faults in spark plugs of individual cylinders can lead to unstable idle speed symptoms.
13
1
Share

What is the appropriate tire pressure for front car tires?

According to the regulations and requirements of the international GBT2978-2008 standard, the standard tire pressure for tires is 2.4-2.5 bar. Tire pressure reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "beep" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. In this case, simply perform a tire pressure reset. Tire pressure sensor damage: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation valve. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only a new replacement part can be installed.
10
3
Share

Which Geely models use Volvo engines?

Geely models such as the Binyue, Borui GE, and Geely's plug-in hybrid vehicles use Volvo engines. More details are as follows: 1. Engine: Geely's plug-in hybrid models are equipped with a 1.5T three-cylinder engine. Specifically, the Borui GE plug-in hybrid version features a powertrain consisting of a 1.5T three-cylinder turbocharged engine, an electric motor, a battery pack, and a 7-speed DCT, complemented by a 48V mild hybrid system. The engine delivers a maximum power of 180 horsepower, while the iBSG motor provides a maximum power of 16 horsepower and a maximum torque of 50 N·m. The official combined fuel consumption is stated as 5.8L/100km.
6
0
Share

Should Transmission Fluid Be Replaced?

Transmission fluid needs to be replaced periodically. More information about transmission fluid is as follows: 1. The main function of transmission fluid is to keep the shifting system clean, as well as lubricate and prolong the lifespan of the transmission components. 2. The replacement interval for transmission fluid is longer compared to other fluids, and some vehicle models feature maintenance-free transmission fluid. 3. Generally, the automatic transmission fluid (ATF) in vehicles should be replaced every two years or every 40,000 kilometers, but this varies depending on the vehicle model, as different models have different requirements.
2
1
Share

What is the fuel tank capacity of the Geely King Kong?

The fuel tank capacity of the Geely King Kong is 45 liters. A fuel tank is a container for storing fuel, used in aircraft or automobiles, and is a specialized container in hydraulic systems for storing hydraulic oil or fluid. Fuel tanks can be divided into two types: open tanks and closed tanks. To maintain oil cleanliness, the tank should have a sealed cover around its perimeter, equipped with an air filter. The bottom of the tank should be at least 150mm above the ground. Taking the 2019 New King Kong 1.5L Manual Base model as an example: it is a compact 4-door, 5-seater sedan, equipped with a 5-speed manual transmission. Its dimensions are 4342mm in length, 1692mm in width, and 1435mm in height, with a wheelbase of 2502mm, and a top speed of 165 kilometers per hour.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.