Where is the air conditioning filter located in the Citroen C-Quatre?

1 Answers
MacAdalynn
07/30/25 2:37am
The air conditioning filter in the Citroen C-Quatre is located in the engine compartment. The functions of the air conditioning filter are: 1. Providing fresh air; 2. Ensuring safety and hygiene; 3. Absorbing harmful substances; 4. Filtering solid impurities. The Citroen C-Quatre is a compact car with exterior dimensions of 4556 mm in length, 1773 mm in width, and 1486 mm in height, with a wheelbase of 2610 mm. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 104 kW and a maximum torque of 200 Nm, with the maximum torque achieved at 4000 rpm. The engine features an aluminum cylinder head and a cast iron cylinder block.
Was this review help?
3
0
Share
More Forum Discussions

What to Do When the Vehicle License is About to Expire?

According to the laws and regulations of the traffic management authorities, if the vehicle owner fails to participate in the annual inspection after the vehicle's inspection period expires, the insurance company will not bear the liability for compensation in the event of a traffic accident. According to the provisions of the vehicle insurance contract, the scope of claims only applies to qualified and legal vehicles. For vehicles that have not undergone the annual inspection on time, no claims will be made in the event of a traffic accident. Additionally, if a vehicle that has not undergone the annual inspection on time is lost, the insurance company will also refuse to compensate. According to the "Road Traffic Safety Law," failing to participate in the annual inspection after the vehicle's inspection period expires is considered an illegal act. The driver will be fined 200 yuan for the violation, have 3 points deducted from their driver's license, and have their motor vehicle temporarily impounded.
1
2
Share

Why does the car air conditioner not cool at idle but cools when accelerating?

There are several reasons why a car air conditioner may not cool at idle but cools when accelerating, including a damaged expansion valve, internal wear of the air conditioning compressor, and excessively low idle speed. Below are detailed explanations for each cause: Damaged expansion valve: This prevents the formation of high pressure in the system before the expansion valve, causing the high-pressure refrigerant to fail to reach the required 150Kpa pressure. As a result, the evaporator after the expansion valve cannot cool down, leading to inadequate cooling from the air conditioner. Internal wear of the air conditioning compressor: This results in the pressure between the air conditioning compressor and the expansion valve not reaching the required 150Kpa to 200Kpa, preventing the refrigerant in the system from circulating normally and causing the air conditioner to not cool properly. Excessively low idle speed: The car's onboard computer determines that turning on the air conditioner at this time could cause the engine to stall.
7
5
Share

What are the reasons and solutions for the Passat's air conditioning not cooling?

Passat's air conditioning not cooling reasons include dust on the condenser coil and long-term closure of the internal circulation switch. Below are detailed explanations regarding the Passat's air conditioning not cooling: Dust on the condenser coil: The condenser coil behind the front grille is covered with dust, leading to poor cooling performance. In this case, the owner can resolve the issue by rinsing the dust off the condenser coil with a water hose during car washing. Long-term closure of the internal circulation switch: The internal circulation switch is closed, resulting in reduced cooling efficiency. There is a button on the dashboard with a car icon and a U-shaped arrow next to it, which is the internal circulation switch. If the owner accidentally turns off the internal circulation switch, it means the air conditioning enters external circulation mode, allowing outside air to enter.
5
4
Share

Can the car be driven if the belt is broken and the water temperature is high?

Do not continue driving. Pull over and contact a towing service to take the vehicle to a repair shop. Below are the reasons for repair: Overheating water temperature: When the water temperature is too high, the viscosity of the engine oil becomes thinner, reducing lubrication strength. At the same time, high-speed moving parts such as pistons and valves are more prone to deformation, leading to a loss of engine power. In severe cases, the expanding pistons can scratch the cylinder walls, and the crankshaft bearings may melt and seize, resulting in unimaginable consequences. Belt breakage: During normal driving, if the engine belt breaks, the car will stall and become unusable. Additionally, the brake and power steering pump will stop working, posing a certain danger. If the timing belt breaks, the coordination between the pistons and valves will be disrupted, potentially causing the pistons to damage the valves. The repair costs in such cases can be quite high.
18
3
Share

How to Open the Hood of a Chevrolet Car?

Pull the interior hood release handle located below the steering wheel on the left side. This will create a small gap in the hood. Then, locate and pull the exterior hood release handle under the front of the hood to fully open it. The functions of the hood are as follows: Airflow Guidance: For objects moving at high speeds through the air, the air resistance and turbulence generated around the object directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the resulting resistance, reducing the impact of airflow on the vehicle. By guiding the airflow, air resistance can be converted into beneficial force, increasing the front tires' grip on the road and improving driving stability. The streamlined design of the hood is largely based on this principle. Protection for the Engine and Surrounding Components: Under the hood lie critical components of the car, including the engine, electrical circuits, fuel lines, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and construction of the hood, it can effectively shield against adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates normally.
10
1
Share

Is the License for Electric Motorcycles the Same as for Regular Motorcycles?

Electric motorcycle licenses and regular motorcycle licenses are the same, both categorized as D, E, or F licenses, but the classification standards differ. To operate a motorcycle, one of the D, E, or F licenses is required. The type of license needed varies based on the motorcycle's engine displacement or maximum design speed: License D permits driving three-wheeled motorcycles with an engine displacement exceeding 50ml or a maximum design speed over 50km/h. License E allows driving two-wheeled motorcycles with an engine displacement exceeding 50ml or a maximum design speed over 50km/h. License F is for motorcycles with an engine displacement of 50ml or less and a maximum design speed of 50km/h or below. According to the new national standard for electric vehicles, electric motorcycles with a maximum design speed exceeding 50km/h, a total weight over 55kg, and lacking pedal riding devices are classified as motor vehicles. The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" stipulate that such motor vehicles require one of the D, E, or F licenses to operate.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.